[X]Assistant

[nobbert]

пїЅпїЅпїЅпїЅпїЅ пїЅпїЅпїЅпїЅпїЅ download

highscreen nano
OS and firmware:OS factory MS Windows Mobile 6.5

Description of the problem:
When you press the phone's power button, the screen starts to glow white and nothing else happens. As the problem arose, I can't imagine, there were no problems before.

There have been actions:
several XP in a row on that the phone starts to glow again for a while, then goes off. After usb, the cable to the computer is connected as usual, you can transfer files. I tried to flash it asSmartphone firmware in Windows Vista, Windows 7Did not work out .

[nobbert]

??????

M

Check outForum Rules!. For the following such message with only question marks will be punished.

Post has been editedvaldemard - 10.01.12, 14:24

[Ivan158]

Most likely a mechanical something, either a screen or a train. More specifically, I will not say. I have never understood this miracle of technology. From heating the body expands, and from cooling taper. This explains why it does not work.

Posted 09/01/2012, 01:43:

And call him out?

[nobbert]

No, it does not ring or accept

[Ivan158]

green tube + red tube + power

Does the TF_card update appear? if so then you hereFAQ on flashing RoverPC S8

Post has been editedIvan158 - 12.01.12, 00:23

[nobbert]

Nothing happens, the white light still shines and everything, although it sounds like it turns on when you turn it on. A phone looks like a whole, the screen is like a novya, I couldn’t understand it. until you pull the battery

Post has been editednobbert - 12.01.12, 11:28

[laric]

Board \ percent \ power controller \ display
Although it is strange that it seems to be included

Via usb, the cable to the computer is connected as usual, you can transfer files

but

does not call and does not accept

Try to flash it somehow, in one of the ways (I link it -FAQ on flashing RoverPC S8

Post has been editedlaric - 12.01.12, 17:06

[Deathlike]

Tell me please, did you finally solve this problem?

[kznsec05]

Solved the problem, change the r605, happiness will come, verified on 2 devices

[doberman85]

Good day members of the forum, almost the same situation. Samsung SM-g531H / DS turns on the androyd is loaded, just fill in the programs for backup and further firmware, the white or some other color of the screen lights up and starts to heat up. The ON / Off button does not obey. After juggling the battery again, the same glitch is only immediately when turned on (it lies down a bit and turns on).

[iliaLov]

What is r605?

[cvecvecve]

[email protected], 21:26

What is r605?

joining

[macduck1988]

I think we are talking about some kind of resistance R (Resistor)

[yusupval]

doberman85 @ 12/15/16, 08:00

Good day members of the forum, almost the same situation. Samsung SM-g531H / DS turns on the androyd is loaded, just fill in the programs for backup and further firmware, the white or some other color of the screen lights up and starts to heat up. The ON / Off button does not obey. After juggling the battery again, the same glitch is only immediately when turned on (it lies down a bit and turns on).

Hello! It turned out to fix?

[Alkulghdrh]

no there on the circuit of such a resistor R605 .....