Assistant
REPLY |
Huawei E171 - Firmware | [firmware] Discussion of firmware Huawei 171 wireless modem |
Message#1 24.03.12, 15:47 | |
LMGTFY [offline] Group: Honorary Gameday Messages 2654 Check in: 14.02.10 Samsung Galaxy A7 (2017) SM-A720F / DS Reputation: 527 | FirmwareHuawei E171 Discussion � | Firmware � | FAQ � Change imei in this topic is not discussed
Camera DashBoard Beeline Dashboard UTPS21.005.15.20.161.zip(65.5 MB) Dashboard 11.126.16.04.161.B427.zip(8.7 MB) User Guide Beeline.pdf(1.9 MB) Mts Unofficial DashBoard Huawei Modem 3.5 Dashboard Huawei Modem 3.5.zip (22.3Mb) Soft Huawei Modem 3.5.zip (16.4Mb) Supported Modems: E171 (Old Revision) Unsupported modems: E171 (with Firmware 21.156.00.00.143) Huawei Modem Nano Dashboard Huawei Modem Nano.zip (32.2MB) Soft Huawei Modem Nano.zip (26.5Mb) Supported Modems: E171 (Old Revision) Unsupported modems: E171 (with Firmware 21.156.00.00.143) HiLink controlled by Huawei Exclusive Modem Firmware Using DT Software Huawei Tools v6 A firmware is a program written to the modem’s memory and designed to control the hardware of the modem itself. Dashboard - ��� ��������� ���������� �������, ������������ � ������ ������ � ��������������� � ��������� ��� ������ ����������� ������. downloadSoft is a modem control program for installation on a computer running Windows, without writing to a modem in memory. FAQ Error 633 Solution [url = "//savagemessiahzine.com/forum/index.php?s=&showtopic=256400&view=findpost&p=62679986 "] Soft is ... (Software, firmware firmware). You can find its version in your native Dasha (Dashboard), which you had when buying a modem (it will be indicated as Software Version) in the menu section — for example, in Diagnostics, i.e. In the modem control program (for example, connect manager from MTS, Megafon Internet, Beeline Internet), this will be discussed in paragraph 2. EITHER you can find out your firmware version using third-party programs that are listed here on the forum and press a couple of buttons there, for example, DC Unlocker or Data Card Unlocker client software, etc. It will be written like this- Firmware: 11.126.85.01.143 or Firmware version: 11.126.85.01.143 Dashboard is ... Modem control program, modem configuration manager, external interface, what you see when you connect a modem, i.e. Internet connection program, where you know the balance, receive and read SMS, etc. THIS IS A Dashboard !!! And this Dash can be from the company MTS, Beeline, Megafon, etc. (only the connection profile is registered here from whom you bought the modem). Those. branded, the one that established the company Beeline or MTS. And there is a universal Dashboard, for example, from Huawei (native to Huawei modems), in which settings of profiles of main operators are already automatically registered (this is done so that you do not manually enter all settings, such as APN, passwords, etc. .d) And changing the Dashboard in no way refers to the modem unlock! What is modem firmware needed for? Those. replacement software (firmware) modem. Here are a few options. The first option is that certain firmware of mobile operators (MTS, Beeline ...) do not give us windowsenter modem unlock codewhen inserting someone else's SIM card! (Why this is done and so it is clear to everyone) Ie We can not unlock the modem for all SIM cards without this code entry window, because there is simply no place to enter the unlock (unlock) code! The second option - for some reason you have determined that your own Firmware (from MTS, Beeline ...) slows down, buggy, does not allow you to live and connect to the Internet. Here you decide to flash the modem with a newer or older (if possible) firmware (Firmware), but if everything works, you will find out after the firmware The third option is that your modem with this version of the firmware does not work with a specific gadget (router, tablet, etc.). Perhaps the firmware for a newer or older version will also help here. Here you need to be attentive. Because Not all firmware can be sewed and rewired by other firmware) The fourth option is (very interesting - you have nakosyachili, tried or stitched the firmware, which does not go to this version of the modem due to its technical features (processor, incompatible versions of firmware, etc.) But ... To unlock (unlock) Modem for all operators do not always need to flash it How to unlock the modem for all operators We insert another SIM card into the modem. We connect. If we see that the code entry window has appeared (Unlock code), take this code in the calculator and enter it. Your modem is unlocked for all operators! I’ll clarify what code you need, go to the Data Card Unlocker client software, look at the data of your modem if you see such a line - Hardware ver. : CD1E153M v 1code, then you need the old code (it is also called OLD ALGO CODE), which is calculatedHuawei Unlock Code Calculator. It will be listed as v1 code in the code request window when another SIM card is inserted. If we see the line Hardware ver. : CH2E303SM v 2code, we need a new code, calculated by the new algorithm, it is also called the New algo code. The new code is calculated by the program.Huawei Unlock Code Calculator. And it will be specified as- v 2code ...! I repeat, not every modem is unlocked by simply entering the code from the calculator when changing the SIM card. There are firmwares that simply do not give out the code entry box when changing SIM cards! Change dashboard Dashboard - This is firmware (Firmware), and the usual replacement of Dashboard (modem control software). They are as many as the firmware. Here I am talking about Dashboard for Huawei modems. In my opinion the most versatile Dashboard, this is version 3.0. There are topics in the header. Let me remind you that we are installing our new Dashboard for example Huawei 3.0 in order to insert any SIM card already and DO NOT manually register profile data for connecting to the network (no connection will be established without profile data). In this version, settings of profiles of all main operators are already registered and there are three languages: Russian, Ukrainian, Eng. Namely,Download Dashboard Huawei 3.0. (While we do not open anything) We turn on our modem. Be sure to close the native program (MTS, Beeline ...), we look that it would be exactly closed (ie, the modem did not work)! Run the Huawei 3.0 Dashboard, follow the instructions of the installer. We wait. Everything! Is done. The modem should decide itself, new firewood should be installed, etc. And already you will have the Huawei 3.0 modem control program (Dashboard) installed, with a completely different icon and control interface, perhaps the screens have already been viewed. Next, delete the native Dashboard from MTS, Beeline ... (or leave it (there are cases when it is needed)). Reboot comp. All is ready! If you have not installed a modem after changing (filling) the Dashboard, then after restarting the computer, this should happen anyway. If not, reconnect the modem. Your task is to install a new Dashboard on your computer instead of the old MTS. And all the firewood was established. We put someone else's SIM card, the Huawei 3.0 Dashboard sees our SIM card and the profile settings are already registered there. Click- Connect and work! Note that we did not flash the modem! And just unblocked (unlocked) with his code for working with all SIM cards! We only changed the Dashboard from MTS to Huawei 3.0. Voice activation and resetting the counter of incorrect NCK input attempts on Huawei modems with a new lock algorithm Difference CD1E153M from CH2E303SM When unlocking the modem, see the program logData Card Unlocker client software.exe (3.51 MB) Unlock viaHuawei Unlock Code Calculator.zip (3.36 MB) Hardware ver. : CD1E153M v 1code - For older modems, it is also called OLD ALGO CODE Hardware ver. : CH2E303SM v 2code - For new modems they also call NEW ALGO CODE Internet profile settings Mts APN: internet.mts.ru Login: mts Password: mts AT + CGDCONT = 1, "IP", "internet.mts.ru" Megaphone APN: internet Login: gdata or Login: megafon Password: gdata or Password: megafon AT + CGDCONT = 1, "IP", "internet" Motiv APN: inet.ycc.ru Login: motiv Password: motiv AT + CGDCONT = 1, "IP", "inet.ycc.ru" or AT + CGDCONT = 1, "IP", "town.ycc.ru" Beeline APN: internet.beeline.ru Login: beeline Password: beeline AT + CGDCONT = 1, "IP", "internet.beeline.ru" Tele2 APN: internet.TELE2.ru Login: - empty Password: - empty AT + CGDCONT = 1, "IP", "internet.TELE2.ru" Beeline APN: home.beeline.ru Login: beeline Password: beeline AT + CGDCONT = 1, "IP", "home.beeline.ru" for numbers from beeline that go together with the modem. U-tel APN: internet.usi.ru Login: - empty Password: - empty AT + CGDCONT = 1, "IP", "internet.usi.ru" Smarts APN: internet.smarts.ru Login: smarts Password: smarts AT + CGDCONT = 1, "IP", "internet.smarts.ru" UTEL Ukraine APN: 3g.utel.ua Login: gdata Password: gdata Access number * 99 # Initialization string AT + CGDCONT = 1, "IP", "3g.utel.ua" Kyivstar Ukraine APN www.kyivstar.net Login: - empty Password: - empty Access number * 99 *** 1 # Initialization string AT + CGDCONT = 1, "IP", "www.kyivstar.net" Yota APN: yota.ru (modems) APN: internet.yota (phone) Login: - empty Password: - empty Access number * 99 # Rostelecom APN: internet.ogsm.ru Login: - empty Password: - empty Access number * 99 # Beeline GPRS Ukraine APN: internet.beeline.ua Login: - empty Password: - empty Access number * 99 # Initialization string AT + CGDCONT = 1, "IP", "internet.beeline.ua" UCell Uzbekistan APN: internet Login: - empty Password: - empty Access number * 99 # Initialization string AT + CGDCONT = 1, "IP", "internet" Beeline static APN: static.beeline.ru Login: beeline Password: beeline Kcell-Activ APN: internet Login: (empty) Password: (empty) Initialization string AT + CGDCONT = 1, "IP", "internet" Tele2 (TELE2 KZ) APN: internet Login: (empty) Password: (empty) Initialization string AT + CGDCONT = 1, "IP", "internet" Beeline (Beeline KZ) APN: internet.beeline.kz Login: beeline Password: beeline Initialization string AT + CGDCONT = 1, "IP", "internet.beeline.kz" Life :) APN: internet Username: no need password: not necessary Access number: * 99 # MTS-Belarus APN: mts Username: mts Password: mts Beeline Ukraine APN: internet.beeline.ua User: not necessary Password: do not need U-Tel (Rostelecom) Access Point: internet.usi.ru Username: empty Password: empty Dial Number: * 99 *** 1 # Letai APN: internet.letai.ru Login: - empty Password: - empty Access number * 99 # Enter the initialization string: Write in the properties of the modem: Start-Control Panel-Telephone and Modem -Modems-choose your modem-properties- Add. communication options-Extras. initialization commands enter it for MTS: AT + CGDCONT = 1, "IP", "internet.mts.ru" For each operator, other settings. room dialer for all operators * 99 # or * 99 *** 1 # It is convenient to prescribe the initialization command program [attachment = "6594436: GPRS APN Writer.zip"], select the operator cellular communication (Russia), click on it and that's it. It is possible to add and delete APN of various most operators (by editing the init.ini file). Works under Win2000 / XP. Useful for those who often changes providers GPRS Internet. Software for working with modems Unlockers My huawei terminal My Huawei Terminal.zip(44.35 KB) Terminal for Huawei modems AT commands AT ^ U2DIAG = 0 (device in the modem only mode) AT ^ U2DIAG = 1 (device in the modem + CD-ROM mode) AT ^ U2DIAG = 255 (device in the modem + CD-ROM + Card Reader mode) is not supported for Huawei E1750 AT ^ U2DIAG = 256 (device in the modem + Card Reader mode) AT + CFUN = 1 (Reboot the modem without the need for juggling) ATI (display information about the modem) AT ^ GETPORTMODE (Displays a list of all devices in the modem) # If the modem does not accept the command AT ^ U2DIAG = 255, then enter AT ^ U2DIAG = 1 The most frequently used commands at work with huawei modem ATI - display information about the modem AT + CFUN = 1 - reboot the modem, a very useful command does not require "distort" the modem. After rebooting, the modem is re-registered in the operator’s network. AT + CGMI - information about the manufacturer of the modem (Recieve: huawei) AT + CGMR - firmware version information (Recieve: 11.608.12.04.21) AT + CIMI - information about IMSI SIM number (Recieve: 250015800471114) AT + CGSN - information about the IMEI modem (Recieve: 353142033840706) AT ^ HWVER - information about the version of the iron modem (Recieve: ^ HWVER: "CD6ATCPU") AT + CSQ - see the level of the radio signal AT ^ CMDL - get a list of all commands AT + CGMM or AT + GMM - request model name AT + COPS - current operator information (Recieve: + COPS: (1, "MTS-RUS", "MTS", "25001", 0), (2, "MTS-RUS", "MTS", "25001" , 2) , (0,1,2,3,4), (0,1,2)) AT ^ U2DIAG? - current mode. AT ^ GETPORTMODE - list of all devices in the modem AT + CLAC will reply with a list of supported commands. Enable voice modem functions: AT ^ CVOICE =? - checking the state of voice functions of the modem (0 - means on) AT ^ CVOICE = 0 - enable voice modem functions Enable / Disable 2G and 3G: AT ^ SYSCFG = 13,1,3fffffff, 0,0 - only 2G mode AT ^ SYSCFG = 2,1,3fffffff, 0,0 - mode preferably 2G AT ^ SYSCFG = 14,2,3fffffff, 0.1 - 3G mode only AT ^ SYSCFG = 2,2,3fffffff, 0,1 - preferably 3G mode AT ^ SYSCFG = 2,2,3fffff ff, 0,2 - enable 2G and 3G mode Enable / Disable WCDMA, HSDPA, HSPA +, HSPA: AT ^ HSDPA = 1 - HSDPA mode is on AT ^ HSDPA = 0 - HSDPA mode is off AT ^ HSUPA = 1 - HSUPA mode is on AT ^ HSUPA = 0 - HSUPA mode off AT ^ HSPA = 0 - WCDMA mode AT ^ HSPA = 1 - HSDPA mode AT ^ HSPA = 2 - HSPA mode AT ^ HSPA = 3 - HSPA + mode AT ^ SYSCFG = 13,1,3FFFFFFF, 2.4 - GPRS / EDGE mode only AT ^ SYSCFG = 14,2,3FFFFFFF, 2.4 - 3G / WCDMA mode only AT ^ SYSCFG = 2,1,3FFFFFFF, 2.4 - mode preferably GPRS / EDGE AT ^ SYSCFG = 2,2,3FFFFFFF, 2,4 - preferably 3G / WCDMA mode Data Card Unlocker client software DT Huawei Tools v6 Huawei drivers New drivers HUAWEI Mobile Connect - 3G PC Voice Interface.zip(1.64 MB) - Voice activation on the modem Useful links: e173update_11.126.85.00.209_b427.zip(8.25 MB) Temporary username and password to get codes for Huawei modems: login: LEVEL5 pass: 12122012 E173__2 v21.158.13.00.143 | E173__2 v21.158.13.00.864 | E173__2 v22.158.01.00.00 Another way to unlock the modem and convert it to HiLink The experience of restoring a killed Huawei E171 modem How to remake Huawei E171 in Huawei E173 For questions about filling caps, please contactboar-hooliganin QMS. How to do it right, what would you understand the first time, well describedhere. Post has been editedboar-hooligan - 11.02.19, 12:48 Reason for editing: New drivers |
Message#2 13.12.11, 20:51 | |
Novice [offline] Group: Active users Messages 44 Check in: 13.12.11 Reputation: 19 | Hello. I am writing for the first time. There is a huawei e171 modem from mts (white). I would like to unlock it from the operator, but it does not work. I tried to use tips from the Internet about entering codes from online calculators. The method is not like, the number of attempts at the moment 7. Perhaps the whole trouble in the new firmware on the modem. I attach two pictures about the firmware version. So: the modem with version 11.126.85.01.143 was unlocked easily with the help of a code, and the modem 21.156.00.00.143 cannot be unlocked or flashed. Maybe someone faced a problem. Thank you in advance Post has been editedctich - 06.03.15, 15:23 Reason for editing: spoiler |
Message#3 27.12.11, 22:59 | |
modemolamkin [offline] Group: Friendssavagemessiahzine.com Messages 16151 Check in: 04.10.08 Reputation: 2108 | |
Message#4 29.12.11, 12:20 | |
a guest [offline] Group: Users Messages 1 Check in: 29.12.11 Reputation: 0 | I'm in a panic! Recently purchased, this device refuses to work with all the unlockers that I was able to open on the network. The last attempt remains. And even I'm not sure that this "dog" can reset the counter, those programs that are currently on the network The log of this infection is attached. It is strange that the modem is found as "webuiver" Guys, do not leave many users acquiring this device for the new year in a difficult position, will we find a solution for the whole world ?! DC-Unlocker client Found modem: webuiver: Model: Huawei E171 IMEI: 861ХХХХХХХХХХХ Firmware Version: 21.156.00.00.143 Compilation date / time: Sep 30 2011 18:39:14 Dashboard version: isover: Chipset: Qualcomm MSM6290 Voice features: Not supported in current firmware version. SIM lock status: Blocked (CardLock) Attempts to enter the code: 9 (left unblocking attempts: 1) Sorry, this modem is not supported! Post has been editedboar-hooligan - 12.04.17, 14:41 Reason for editing: spoiler |
Message#5 02.01.12, 13:49 | |
modemolamkin [offline] Group: Friendssavagemessiahzine.com Messages 16151 Check in: 04.10.08 Reputation: 2108 | I live in Ukraine and I do not have these modems, but judging by the information on the Internet there are already some conclusions ... Well, firstly, judging by the log in the modem, there is a Chipset processor: Qualcomm MSM6290 And judging by the screenshots of the modem's entrailshttp://radikal.ru/F/s007.radikal.ru/i301/1...97d445.jpg.htmlit turns out that they are worth the processor company HISILICONhttp://www.hisilicon.com/HI6731 And this means that the code calculation algorithm for HUAWEI modems is trivial in this case (and there is evidence for this) Unlock such modems most likely by either buying codes from Huawei or sending a dozen modems from one of the unlock commands for experiments. All other tips that will be given in this thread are simply useless. Because many can be clever but only a few consciously understand that there is an unlocking of the modem and how it works. From all the above conclusion. The HUAWEI E171 MTS Russia Firmware 21.156.00.00.143 modems are currently unlocked and no calculators or unlockers can help here. -------------------- |
Message#6 04.01.12, 22:18 | |
Visitor [offline] Group: Active users Messages 17 Check in: 31.03.10 Glofiish (E-Ten) M700 Reputation: 0 | There was such nonsense I could not unlock until the seventh attempt and I could not reset the counter until I updated my native firmware from the site and then immediately all the codes came up and were unlocked as cute: D Post has been editedLPB - 04.01.12, 22:20 |
Message#7 07.01.12, 20:07 | |
Novice [offline] Group: Active users Messages 44 Check in: 13.12.11 Reputation: 19 | |
Message#8 08.01.12, 17:38 | |
Visitor [offline] Group: Active users Messages 17 Check in: 31.03.10 Glofiish (E-Ten) M700 Reputation: 0 | http://trustoff.ru/page.php?18It's all and instructions and software The firmware update should be still on the site of the modem operator |
Message#9 13.01.12, 02:06 | |
modemolamkin [offline] Group: Friendssavagemessiahzine.com Messages 16151 Check in: 04.10.08 Reputation: 2108 | There was such nonsense I could not unlock until the seventh attempt and I could not reset the counter, until I updated the native firmware from the site and then immediately all the codes came up and were unlocked as cute I also slept with Merlin Monroe and what? Bother to specify the firmware version of your modem before and after updating the firmware. Otherwise, your words can be regarded as idle talk and balabolism. By the way on your link ... Attention: Huawei E171 modems with firmware version appeared: 21.156.00.00.143 - these modems will not be unlocked yet. Post has been editedDomovoj - 13.01.12, 02:10 -------------------- |
Message#10 21.01.12, 13:56 | |
Experienced [offline] Group: Curators Messages 477 Check in: 17.12.09 Google nexus 4 Reputation: 82 | The same sadness, I got into the hands of a freshly bought MTS E171 with the same FW on board. All I need from him is to transfer him to modem mode. But the standard command AT ^ U2DIAG = 0 in the terminal does not pass (ERROR). Attempts to unlock, too, so far only lead to a decrease in the counter :) Data from DC-Unlocker: DC - Unlocker 2 Client 1.00.0764 Detecting card: selection: manufacturer - Huawei modems model - Auto detect (recommended) Found modem: E171 Model: Huawei E171 IMEI: 86149XXXXXXXXXXX Serial NR. : W2W5TA11B0XXXXXX Firmware: 21.156.00.00.143 Compile date / time: Sep 30 2011 18:39:14 Dashboard version: UTPS21.003.28.22.143_MAC21.003.28.24.143 Chipset: Qualcomm MSM6290 Voice feature: not supported in current firmware SIM Lock status: Locked (CardLock) Wrong codes entered: 1 (unlock attempts left: 9) sorry, this modem is not supported! How else can you put it in modem only mode? -------------------- ~ Google Nexus10 32Gb ~ Nexus4 ~ LG G-Pad 8.3 V500 black Vido mini s |
Message#11 21.01.12, 14:26 | |
a guest [offline] Group: Users Messages 4 Check in: 28.02.07 Asus mypal a730w Reputation: 0 | I join the question. While everyone is happy with the mts, it was not for nothing that he chose him, although he hoped for further unlocking. But I really want to fasten it to the android tablet. |
Message#12 21.01.12, 23:09 | |
modemolamkin [offline] Group: Friendssavagemessiahzine.com Messages 16151 Check in: 04.10.08 Reputation: 2108 | AT commands for Huawei E367, E352, E353 and new E171 modems AT ^ SETPORT? - Display current configuration AT ^ GETPORTMODE - Display currently active mode AT ^ SETPORT = "A1, A2, 1,2,3,7, A1, A2" - Set default configuration AT ^ SETPORT = "A1, A2, 1,2,3,7" - Disable CD + SD AT ^ SETPORT = "A1, A2, 2.7" - Disable CD + SD + modem set in Win7 only NDIS mode AT ^ SETPORT = "A1, 2.7" - CD + NDIS AT ^ SETPORT = "A1, A2, 1,2,3,7, A1, A2, 4,5,6, A, B, D, E" Also reset by default. ^ SETPORT: A1: CDROM ^ SETPORT: A2: SD ^ SETPORT: A: BLUE TOOTH ^ SETPORT: B: FINGER PRINT ^ SETPORT: D: MMS ^ SETPORT: E: PC VOICE ^ SETPORT: 1: MODEM ^ SETPORT: 2: PCUI ^ SETPORT: 3: DIAG ^ SETPORT: 4: PCSC ^ SETPORT: 5: GPS ^ SETPORT: 6: GPS CONTROL ^ SETPORT: 16: NCM Only modem: at ^ setport = "a1, a2; 1,2,3" Post has been editedboar-hooligan - 22.04.15, 22:21 -------------------- |
Message#13 22.01.12, 23:46 | |
Experienced [offline] Group: Curators Messages 477 Check in: 17.12.09 Google nexus 4 Reputation: 82 | In general, the same thing, successfully transferred to modem mode. The E171 modem with firmware 21.156.00.00.143 was successfully able to earn directly from the GI S8690 satellite receiver (fw. ..0.61 with 3G support) and also with the DLINK DIR-620 router (fw. 1.3.0). -------------------- ~ Google Nexus10 32Gb ~ Nexus4 ~ LG G-Pad 8.3 V500 black Vido mini s |
Message#14 23.01.12, 21:08 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 54 Check in: 19.12.07 Reputation: 7 | Guys and how much do you have in retail Huawei E171 from MTC with a new firmware? -------------------- Programmer optimist |
Message#15 23.01.12, 21:19 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 54 Check in: 19.12.07 Reputation: 7 | There are a lot of things, but they did not suit me. My operator does not work. Ready to buy a program to unlock or sell modems. -------------------- Programmer optimist |
Message#16 28.01.12, 23:52 | |
Visitor [offline] Group: Active users Messages 19 Check in: 24.12.11 teXet TM-7021 Reputation: 3 | And how to translate it back to see his computer? All the default reset commands cause an ERROR error. I will answer myself: the AT ^ SETPORT = "A1, A2; 1,16,3,2, A1, A2" command returned everything Post has been editedSimonna - 29.01.12, 00:29 |
Message#17 01.02.12, 01:08 | |
a guest [offline] Group: Users Messages 5 Check in: 27.04.10 Asus p320 Reputation: 0 | Help configure the E352 modem for the ZT180-102 tablet, when connected to the tablet, it defines the modem as a card reader. I tried using the terminal to prescribe the command: Only modem: at ^ setport = "a1, a2; 1,2,3", after which OK appeared, but the tablet still considers it as a flash drive. Maybe there are more commands or ways to make this modem be determined in the tablet? P.S. I tried to connect the E173 modem to the tablet without dancing with a tambourine in the terminal, he immediately identifies him as a modem and climbs to the Internet as his own. |
Message#18 01.02.12, 02:04 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 54 Check in: 19.12.07 Reputation: 7 | Drivers put new. E352 and E171 with a new processor require firewood different from those that went to the old E171 E173 E1550, etc. -------------------- Programmer optimist |
Message#19 01.02.12, 10:25 | |
a guest [offline] Group: Users Messages 5 Check in: 27.04.10 Asus p320 Reputation: 0 | Drivers put new. E352 and E171 with a new processor require firewood different from those that went to the old E171 E173 E1550, etc. Yes, it seems, and so new drivers stand on it. Date: 08/16/2011, driver version: 2.0.6.714, according to the device manager. If there is even newer, could you share a link? : rolleyes: |
Message#20 01.02.12, 10:51 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 54 Check in: 19.12.07 Reputation: 7 | |
Message#21 01.02.12, 12:50 | |
a guest [offline] Group: Users Messages 5 Check in: 27.04.10 Asus p320 Reputation: 0 | Thanks for the drivers, but they turned out to be older than mine, I forcibly installed the ones you posted, I tried to prescribe a command for the "only modem" mode in the terminal, the command went as before, but in fact the tablet is defined just like a flash drive (( |
mobile version | Now: 05/01/19 10:28 |