> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Amazon Kindle Fire - Firmware



Rep: (175)
Amazon Kindle Fire - Firmware
PictureKindle fire
Description | Discussion пїЅ | Purchase пїЅ | Firmware пїЅ

Important information!
This topic applies only to the first generation Kindle Fire. See the firmware version!6.С….С…_user_xxxxxxxxx - it means to you here)
Do not attempt to do the following manipulations on the Kindle Fire 2 gen (10.x.x_user_xxxxxxxxx), HD 7 "(7.x.x_user_xxxxxxxxx) and HD 8.9 "(8.x.x_user_xxxxxxxxx)!

The author of a topic is not responsible for YOUR actions !!! Everything that you do, do at YOUR fear and risk !!!
Before all manipulations, we do a backup!

Formulate the questions clearly, informatively and clearly - then the probability is high that the answer will be just as intelligible and useful.
Example: "Hello, I have installed<firmware version>. I'm trying to get<some result>. I did<actions>. As a result, I got<the result that is obtained>. WHERE? "


This topic discusses issues related to KindleFire firmware! Offtop and posts not related to the topic will be deleted without warning !!!

Drivers and utilities:
TWRP Otter

TWRP Otterx
• TWRP OtterX 2.7.0.1Attached filezip-otterx-twrp-2.7.1.0-recovery.zip(7.28 MB)

• TWRP OtterX 2.8.2.0Attached filezip-otterx-twrp-2.8.2.0-recovery.zip(7.38 MB)

пїЅ OtterX ROM / TWRP / Bootloader topic on xda beta
пїЅ OtterX Bootloader
пїЅ Android SDK Tools
пїЅ Kindle Fire Utility 0.9.9
Kindle_Fire_Utility features:
    • Automatic installation of temporary and permanent ROOT
    • Automatic download and install TWRP Recovery
    • Automatic download and installation of GoogleApps / Market / GoLauncherEX.
    • Definition and selection of operating modes of the device.
    • Auto-installer drivers (Kindle Fire Utility Driversinstall_drivers)
    • Automatic download and install stock firmware.
    • Mounting the system to Write / Read.
    пїЅ v. 9.9 Ability to install COTR Recovery, Dual-Boot and rollback with Dual-Boot.
    пїЅ v. 8-9 Fixed some points in the installation of root and drivers.
    пїЅ v. 9.1 Fixed and improved driver installation.
    пїЅ v. 9.2 Fixed and improved installation of TWRP Recovery.
    пїЅ v. 9.3 A new version of BurritoRoot has been included to eliminate errors during rutting.
    пїЅ v. 9.5 Getting root-rights on firmware including 6.3 and 6.3.1.
    пїЅ v. 9.6 Fixed SuperUser installation.

пїЅ Universal rootto get ROOT rights on firmware 6.3.2. fromGuns_tm
пїЅ KFU_Repack by s-tnovikov
What is changed / added:
    1. Based on version 0.9.2
    2. The item with the download and installation of TWRP is replaced by "Installing Recovery and FireFireFire"
    3. Added items with different recovery installation options (you don’t need to upload anything else, everything you need is already included in the utility and located in the recovery folder)
    4. Added item to quickly return toNORMALmode(fastboot -i 0x1949 oem idme bootmode 4000; fastboot -i 0x1949 reboot)
    5. Fixed driver installation.


Firmware
Official firmware:

Modified firmware:

Mods of official firmware
[*] Mod based on of. 6.2.1 (+ root, + busybox) by user eldarerathis . Topic on XDA ( On the people. )
Short description and changelog:
    Official firmware from Amazon v.6.2.1 with Root and Busybox installed.

[*] Mod based on of. 6.2.2 (+ root, + busybox) by usereldarerathis. Topic onXDA
Short description and changelog:
    Official firmware from Amazon v.6.2.2 with built-in Root and Busybox.

[*] MoDaCo Custom ROM based on. 6.2.2 from the userPaulOBrien. Topic onMoDaCo
Short description and changelog:
    Modified firmware from Amazon v.6.2.2.
    - improved performance
    - reduced firmware size
    - Google Services Framework and Android Market installed initially
    - the device will be defined as Galaxy Tab for the ability to download officially not supported applications and games
    - Root and Busybox

[*] MoDaCo Custom ROM based on. 6.3 fromPaulOBrien. Topic onMoDaCo
Short description and changelog:
    Amazon Modified Firmware v.6.3
    - improved performance
    - reduced firmware size
    - Google Services Framework and Android Market installed initially
    - the device will be defined as Galaxy Tab for the ability to download officially not supported applications and games
    - Root and Busybox

[*] Modaco_GR9_V & M & S_edition v2.0SELECTION OF USERSfrom usersVedroid (sergeysadoha), M1sterGrace andsam_top7. Topic onkindle-fire.in.ua
Short description and changelog:
    Amazon Modified Firmware v.6.3
    - Based on MoDaCo Custom ROM 6.3
    - Carousel removed (in replacement - ADW Launcher EX), Audible, Pulse, IMTb
    - Custom download animation
    - Changed the standard wallpaper
    - Changed unlock slider
    - Gallery from CM7 (pictures open much faster + multitouch works correctly, i.e. when scaling, the image increases smoothly, and does not leave under your fingers as in stock)
    - added Jbak Keyboard
    - built-in CPU Master to switch the profile and frequency of the processor to improve performance and smoothness (on the Quadrant (perfomance) test = ~ 2200 - 2300 b)
    - modified build.prop (disguise under Galaxy Tab + accelerator scripts)
    - MultiPicture Live Wallpaper for changing wallpaper without repacking and clipping
    - A package of firmware and widgets, i.e. the firmware in fact in the state "ready to use"

Android 2.x.x based firmware
[*] CyanogenMod 7 firmware fromwhistlestopSELECTION OF USERS(current update 01/13/2012) Topic onXDA
Short description and changelog:
    CyanogenMod 7 firmware with Android 2.3.7 version. It is characterized by a more familiar user interface and increased speed. Of the minus, you can note less battery life and the presence of the telephone part.

[*] Skimp Killah Super Kang Project 1.3 based on CM7 fromSkimp killah(current update 02/02/2012) Topic onXDA
Short description and changelog:
    CyanogenMod 7 firmware with Android 2.3.7 version with a number of additional improvements and programs:
  • ICS Keyboard
  • ICS Theme
  • Embedded Google Apps (Market, Talk, ...)
  • Removed unnecessary applications (Phone, sms / mms, DSP manager, ...)
  • Galaxy Nexus Booth Animation
  • It uses a custom core from IntersectRaven (ATTENTION!Characterized by increased power consumption!)
    Changelog:
    Version 1.2
    - Used custom kernel from IntersectRaven.
    - Fixed USB mount.
    Version 1.3
    - Fixed statusbar errors.

[*] CM7 Barebones fromTakenover83. Topic onXDA(current update is 03/29/12)
Short description and changelog:
    CyanogenMod 7 firmware with Android 2.3.7 version with a number of changes:
  • - ICS Theme

  • - Custom download animation
  • - Stock keyboard Kindle Fire
  • - overclocked kernel intersectRaven kernel OC 1.2Ghz
  • - Samsung Galaxy Tab masking to access officially unsupported applications
  • - QuickPic instead of Gallery, also included Button Savior and Volume Control
  • - Removed the "telephone" part of the application

[*] MIUI2.1.20(current update 02/01/2012) Topic onXDA.
Russian version by sergmurtazin
Short description and changelog:
    Firmware from Chinese developers with Android version 2.3.7. It is characterized by a beautiful and convenient user interface, good speed. Of the minus can be noted the lack of Russian language.

[*] HellFire Kindle CM 7.2 v1.1 fromx0xhellx0x. Topic onXDA(current update 04/18/12)
Short description and changelog:
    CyanogenMod 7 firmware with Android 2.3.7 version with a number of changes:
  • - Wallpaper in the style of Hell
  • - Theme, ICS live wallpaper
  • - New icons
  • - Amazon Apps, Gapps, TiBackUp embedded

ICS firmware

Jelly Bean firmware

Kit Kat firmware
Official Cyanogenmod 11 for otterX
Short description and changelog:

ROM: SlimKat (unoffical) for the OtterX topic on xda
Short description and changelog:
Merge in 4.4.3
TRDS for some packages due to 4.4.3
Update Nova Launcher
Updated Addons
Fix some translations
Device specific
Kona: Update some audio configs, camera bugs and graphic glitches
Toro: Fix up some RIL problems
Rhine: Merge in CM changes

OtterX ROM / TWRP / Bootloader topic on xda beta
Instructions for returning from Otterx to Otterfromkbm113
Short description and changelog:
IMPROVEMENTS:
All new mainline u-boot sources from "2014.01" release
All new multi level expandable text-based menu system. Uses 2 styles of power button presses to navigate. Regular press = move down, Long press = select.
Long press power to turn on device. This eliminates those accidental power ons while traveling, etc.
Improved fastboot handling and shows shown on LCD
Native "reboot recovery" support (OtterX ROM build needed)
Native handling of serial # and mac addr passed into kernel (no more idme binary needed)
Support for "Charger" bootmode (OtterX ROM build needed)
New splashscreen (similar to HDX models), low-battery screen and fastboot mode screen
Added device binary support in boot.img (for loading newer kernels)
ALSO REQUIRES NEW RECOVERY AND OtterX ROM build
[v2.03] Splashscreen can be loaded as BMP file from "splash" partition (can be applied by: fastboot flash splash initlogo.bmp)
[v2.03] Built-in menu option for EMMC corrupted devices
[v2.03] press button
[v2.03]] menu new load a bootloader)
[v2.03] Fixed partition mode to detect what's actually on the device vs. some random setting
[v2.03] Fixed fastboot erase command
[v2.03] Fixed fastboot flash bootpart command
[v2.04] Handle charger mode correctly
[v2.05] Tweaked the USB plug-in detection for fastboot mode
v Adj ter future future future future future future future future future future future

[CM11] [OFFICIAL] InFriction ROM v11 [SPEED] [PERFORMANCE] topic on xda
Short description and changelog:
20131222 - Initial Release

20131225 - Fixed Youtube Bug
Cleaned up useless and memory hungry apps
New Boot Animation
Google Play included

20140107-Fixed Google Play Store error
New Tweaks for much better performance

20140208-Updated with latest CM changes
KSM for more free RAM
New boot animation
Added Jeeko's Performance Engine for smooth operation
Added my own speed tweaks.

OtterKat Rom (CM based KK) topic on xda
Short description and changelog:
.

[ROM] [4.4.2] [Official] [CMB Roms cmb4.4.2] [Kindle Fire] [01/25/2014] topic on xda
Short description and changelog:
.

[KK 4.4.2] CM11.0 / SGT7 for the Kindle Fire topic on xda
Short description and changelog:
[20140502]
* Latest device / kernel and CM changes

* Additional OtterX build

[20140417]
* Latest device / kernel and CM changes

[20140323]
* Kernel: trim fix [Hashcode]

[20140314]
* Latest device and CM changes (e.g. IMDB fix [Hashcode])

[20140221]
* Latest device and CM changes

[20140129]
* Latest device and CM changes

[20131230]
* frameworks / native: Fix boot animation rotation problem when ro.sf.hwrotation is set to 90 or 270 [Clyde Tan]

[20131215]
* Settings: Fix for quick settings tiles and loading [sbrady]

[20131212]
* Android 4.4.2
* Framework / Settings: Large recent thumbnails, recents panel color and dual pane preference [sbrady]
* Framework / Settings: Notification panel and quick settings tile color [sbrady]
* Kernel: zRAM (Enable in performance settings)

[20131208]
* Android 4.4.1

[20131206]
* Device: Enable translucent lockscreen
* Framework / Settings: Add setting to enable or disable navigation bar [sbrady]
* Framework / Settings: Add forceHighEndGfx property to override isHighEndGfx [sbrady]

OFFICIAL CM11.0 + 3.0.72 Kernel for Kindle Fire [NIGHTLIES] topic on xda
Brief Description and Changelog
[11/25] Released updated build for cm11.0
[08/12] Kernel updated to 3.0.72 (on par w / Google / common kernel)
[07/30] Updated to CM10.2 build
[05/26] Backlight driver update to help w / SODs
[05/24] Sensor updates (includes light sensor now usable in Android OS
[05/24] Remark for audio w / headset function - testing needed.
[05/14] New audio driver (WIP)
[03/27] Reboot Recovery mode is now fixed
[01/17] Updated SGX / PowerVR driver to latest binaries from omapzoom (still showing 1.9@2166536)
[01/15] CM10.1 updates + reverted some USB changes
[01/07] Battery life / sleep improvements
[01/06] Update to 3.0.50 kernel
[01/06] Update wifi firmware to R5.SP3.06
[12/16] Fixed Deep Sleep
[12/15] Added multi-profile fix

[ROM] [OFFICIAL] [4.4.2] HELLKAT | LINARO 4.8 | 3.0.101 Diablo Kernel | Kindle fire topic on xda
Brief Description and Changelog
.

[CM11] [UNOFFICIAL] InFriction ROM v4.4.2 [FOR-FREE-RAM] [OTTER] topic on xda
Brief Description and Changelog
20131222 - Initial Release

20131225 - Fixed Youtube Bug
Cleaned up useless and memory hungry apps
New Boot Animation
Google Play included

20140107-Fixed Google Play Store error
New Tweaks for much better performance

[ROM] [Carbon] [UNOFFICIAL] [KITKAT] [KINDLE FIRE] [WEEKLIES] [JAN 24, 2014] topic on xda
Brief Description and Changelog
.

Flash Player on Android 4.4 Kitkat
change_to_nexus7-4.4

Lollipop firmware
[ROM] [OFFICIAL] [5.0.2] AICP for OtterX [NIGHTLIES] topic onxda
Brief Description and Changelog
пїЅ

Slimpop for the OtterX LRX21VAlpha topic on xda
Brief Description and Changelog
пїЅ

[ROM / KERNEL] UNOFFICIAL CM12.0 for OtterXAlpha topic on xda
Brief Description and Changelog
• [11/30] Alpha build made public

Ubuntu
[ROM] Ubuntu Touch Preview [02/27: Alpha Update # 1] topic on xda
CHANGES:
[02/27] Fixed the UI DPI settings. Needs to re-flash following the instructions below.

List of current versions of firmware, kernels and utilities on XDA


Instructions:
What is what?
    It is useful to get acquainted withAndroid OS FAQ where you can find answers to common questions about the Android operating system and Glossary where the basic terms are explained.

    Firefirefire
      FireFireFire - modified bootloader (bootloader), giving the opportunity to choose the device boot mode: Normal (normal) or Recovery (recovery).

    TWRP Recovery
      TWRP Recovery is a modified unofficial recovery specially made for touch control.
      Allows:
    • Install unofficial firmware
    • Install add-ons and fixes
    • Connect to PC via USB in removable storage mode
    • Connect to PC via USB in ADB mode
    • Create a backup of both the entire firmware and its individual parts (system, settings, installed programs)
    • Recover data from previously created backup
    • Reset the data to the factory settings (Wipe - factory reset), clear the cache partition (wipe - cache), clear the dalwick cache (wipe - Dalvik-cache), clear the battery statistics (wipe - battery stats)
    • Format and create partitions on a memory card.
      Benefits:
    • convenient interface fitted to the touch control
    • ability to install * .zip from any folder
    • advanced settings and functions
      Screenshots:
      Attached Image


    Clockworlmod recovery (CWM)
      Clockworlmod Recovery is a modified unofficial recovery that is released for most Android devices. It has much more features than native recovery. On some devices it is installed instead of native recovery, on other devices it is installed in parallel.
      Allows:
    • Install unofficial firmware
    • Install add-ons and fixes
    • Connect to PC via USB in removable storage mode
    • Connect to PC via USB in ADB mode
    • Create a backup of both the entire firmware and its individual parts (system, settings, installed programs)
    • Recover data from previously created backup
    • Reset the data to the factory settings (Wipe - factory reset), clear the cache partition (wipe - cache), clear the dalwick cache (wipe - Dalvik-cache), clear the battery statistics (wipe - battery stats)
    • Format and create partitions on a memory card.
      Benefits:
    • familiar and simple interface
    • ability to select device boot mode
    • fast work
      Screenshots:
      Attached Image



[*] Video instruction for OtterX ROM / TWRP / Bootloader
[*] Instructions for obtaining root-rights for firmware 6.3.3
[*] Instructions for obtaining root-rights (for firmware up to version 6.2.1)(old method)
[*] Manual driver installation manual (not via install_driver)
[*] Instructions for obtaining root-rights for firmware version 6.2.1 and higher (Attention sometimes it is impossible to get root by this method !!! Use the latest version Kindle_Fire_Utility))
[*] Instructions for obtaining root-rights for Linux
[*] Video instruction "Route + TVRP"fromShiFT_UA
[*] Video instructions for changing the firmware when the TVRP is already installedfromEvgeshaHouse
[*] Dualboot bootloader installation instructionsAttention: on the map after installation only 3.6 GB will be available.
[*] Instructions for installing Amazon Silk on custom firmware
[*] Resetting the boot mode (the device is loaded only in the recovery, flashing does not help)[color = red]
Installing custom firmware (for example, CM7 + GoogleApps) via TWRP Recovery
    1. Download the zip-archive with the firmware you need.
    2. Downloading the latest versionGoogleapps(For ICS we take gapps from the topic header, for the rest of the firmware this item is skipped).
    3. We drop the downloaded archives into the root of the memory card (sdcard /).
    4. Reboot to TWRP Recovery.
    5. We do all the wipes: wipe / dalvik-cache, cache, factory reset, system.
    6. Go back to the main menu (upper right arrow back) and enter the Install section.
    7. Select update.zip in the right panel, click install and wait for the operation to finish.
    8. Select GoogleApps ..... signed.zip in the right panel, click install and wait for the operation to finish. (for the rest of the firmware, except for ICS, we skip this point)
    9. Return to the main menu and click Reboot / System
    We use everything.

Installing FIREFIREFIRE + TWRP or CWM Recovery
    ATTENTION!!! The device must be Rutovan !! !
    1. Download the KindleFireUtility utility, unzip it to any convenient place for you.
    2. We connect the "light" to the computer (on the stock firmware, installation of third-party applications should be allowed and the connection as a flash drive is turned off !!!)
    3. Go to the folder with KFU and runinstall_drivers.bat(as administrator). Install / reinstall drivers.
    4. In the same folder, runrun.bat.
    5. Check whether the device has been determined (i.e. it should be the same as on the screen):
    Attached Image

    6. Select the 5 point (enter 5 and click inter) - "Installing Recovery and FireFireFire".
    7. In the next menu, select, depending on what kind of recovery you intend to install, point 4 or 5. I advise installing CWM, as it is more reliable. IMHO.
    We are waiting for the end of all operations (the device reboots first in fastboot, and then in normal mode).
    Do not try to remove the cable during the installation process !!!
    To enter the recovery: when a yellow triangle appears, press and hold, until the color changes to red, the power button.

Extreme Recovery Method
    Making a repair cable

    warlock_bc @ 12/22/2011, 00:19*
    Brik about fireworks, he encountered yesterday, today, I resolved the problem. Generally requires a so-called factory cable - conventional cable with micro yusb, with a link between 1m Ping (+ 5V) and 4m (default is not connected), naturally prdetsya razderbanit whole to solder a jumper, but the usefulness of this simple devaysa invaluable. In any case connecting Kindle through it we come in fastboot, and from there it is already possible to put the same TWRP c pomoischyu Kindle Fire Utility (see. Cap) that I did today and what inexpressibly glad. Here fotoinstruktsiya for the manufacture of the cable:

    Cut as pictured on both sides
    Attached Image

    The result is
    Attached Image

    Attached Image

    Attached Image


[/ list]

miscellanea
What to do if the device does not load inNormal modeand drivers are not installed in the modeFastboot
    Answer 1st
      S-tnovikov @ 12/27/2011, 08:24 *
      1. Calm down and do not panic. You haven't done anything, you are just in FastBoot mode.
      2. Turn off the device by long pressing the power key.
      3. Restart the computer, just in)
      4. Open the device manager so that while the next item is executed, you have managed to update the driver.
      5. Devays atoffable to connect to the computer and he himself turn on, though all in the same FastBoote.
      6. Start KFU and in the first paragraph select the normal mode (that the program will not be determined by the device and writes “FastBoot status: offline” is not paid attention).
      Attention!!!Perhaps the first time you do not succeed, then repeat paragraphs 4,5,6 again. Also, when defining a device as an "unknown" or "compound" device, delete it and update the device list - this can also help.


    Answer 2nd
      Diverrus @ 12/27/2011, 10:35 *
      I should add that people do not panic too much:
      statuses:
      launch logo: KindleFire on a slightly dimmed screen by backlight - fast boot device mode
      starting logo: yellow triangle 3fire - fast boot mode.

      Add to recipes-tnovikov , as I did with my flash in fast boot mode:
      Notice how we select the normal boot mode (4000) in KFU v 7.0
      We see such message:
      ***********************************************
      * Activating Normal (4000) *
      ***********************************************
      <waiting for device>
      do not panic, go todevice Manager and most likely we find some kind of USB device there, opening which you can see that it is still Kindle (I saw such an inscription somewhere, now I’ll not say for sure - I am writing from memory)
      doingupdate driver and forcibly handles indicate the path for example: C: Kindle Fire Utilitydrivers38
      Winda picks up a light, and KFU gives him a command to the normal reboot (4000)
      At some point I had an incomprehensible bug and the firewood from KFU v7 was not hooked up, I picked up firewood from TWRP (although it seems they are identical)
      Here is a supplement! Good luck to all! AT)


    3rd answer
      Monten @ 01/03/2012, 15:56 *
      Calbas @ 01/03/2012, 13:23 *
      Irpich 10th day. 6.2.1, then TWRP, through it according to the instructions "modified Amazon firmware 6.2.1 + root + busybox", when rebooting, only TWRP mode, downloaded the drain from Amazon, uploaded, installed - fastboot (or similar to it visually). I tried all the described methods of respected members of the forum, and from the cap, and from the discussion - while the situation - opa, sorry. I attach the screenshots, maybe someone like that too ...

      as far as I can see you have at least the wrong drivers installed (must be an Android ADB Interface device).
      remove the third line for the 1949 vendor from the android_winusb.inf file, i.e. leave it like this:
      ; Kindle Fire
      % SingleAdbInterface% = USB_Install, USBVID_1949 & PID_0006
      % CompositeAdbInterface% = USB_Install, USBVID_1949 & PID_0006 & MI_01

      After that, save the file and reinstall the driver


    How to simplify sound adjustment on the CM7?
      Naromdvd @ 12/21/2011, 07:36 *
      so far only: (c) http://kindle-fire.in.ua/news/110-obnovlen...l"Taking up That the Kindle Fire does not have special volume buttons, sound control can be a daunting task. You will have to go to the desktop, go to “Menu”, select “Settings”>"Sound", and only then "Volume" to be able to adjust the volume. Or you can install third-party applications that allow you to adjust the volume directly from the desktop or any other "window". One of them is called Volume control , released by the developer RubberBigPepper, inspires confidence, and allows you to adjust the volume by moving your finger up and down in the right side of the screen. "


    Access to officially unsupported AndroidMarket applications (issued for Samsung GalaxyTab)
      1. RootExplorer om go to the system folder and find the file build.prop there.
      2. Long hold on it and select "Open in Text Editor".
      3. Replace the values ​​in the corresponding lines with these:
      ro.product.model = GT-P1000
      ro.product.brand = Samsung
      ro.product.device = GT-P1000
      ro.product.manufacturer = samsung
      ro.build.description = GT-P1000-user 2.3.3 GINGERBREAD DXJPI release-keys
      ro.build.fingerprint = samsung / GT-P1000 / GT-P1000: 2.3.3 / GINGERBREAD / DXJPI: user / release-keys

      4. After editing, press Menu - select "Save Changes" and agree with the changes.
      5. Restart the device and use a large number of applications from the market.

  • A very good program for emulating hardware buttons.Button savior
  • How to make a photo frame from Kindle firefromMirrorbuoy


Post has been editedstarkonov - 11.01.18, 09:51
Reason for editing: Updated link to KFU



Rep: (58)
skripnik_n,
Same stuff. I do not know what to do(



Rep: (22)
edkozuto @ 29.08.2012, 17:31*
skripnik_n,
Same stuff. I do not know what to do(

I'm sorry for offtopic, but "the same garbage" with a tablet or a child? : D



Rep: (0)
I wonder why sgt7 revert to the old kernel?



Rep: (58)
skripnik_n,
C tablet)

In the case of - I'm desperate. Is there no way you can not bring back to life?
I think to shop for Ipad stomp

Post has been editededkozuto - 29.08.12, 21:52



Rep: (22)
edkozuto @ 29.08.2012, 21:47*
In the case of - I'm desperate. Is there no way you can not bring back to life?

And how did you get such a result?



Rep: (58)
Oh, it's,skripnik_n, little saga)
It all started with the fact that I started rutovat Kindle, put the FFF and tvrp through CFI, do not get any reason (due to firmware 6.31, certainly - explanatory manual on rutovaniyu this firmware I have not found). Fastbut I went in and began to sew by hand - lost partitions - Kindle no longer included in general.
Here prompted to close one contact on the PCB and through the linux flash FFF and tvrp through firekit. Happened. BUT! When the firmware is loaded (standard), the plate showed that off (and, in fact, turned off).
I decided to update the FFF through tvrp, downloaded ustanovochnik, threw on the Kindle, and set seems lost partitions again. Again closed contact, I went reusing the FFF and tvrp, but something went wrong, Kindle crashes did not install something, and here it is, the result.
Now, does not go in fastbut not caught either in Windows or in Linux, the closure does not help.

Post has been editededkozuto - 29.08.12, 22:14



Rep: (18)
Nikotin_v @ 29.08.2012, 22:04*
I wonder why sgt7 revert to the old kernel?

I think due to the fact that the economy has not improved much, but the problem with charging devaysa - evident. The first charging after flashing with all wipe more or less adequately held. (When set to "top" just buggy). Already second charging lasted 13 hours - the charging current according Battery monitor widget only about 300 mA. After that, 10 hours showed only 1 percent of discharge, although the current in a dream as before 52-53 mA. And the voltage drop-matches. Bugs ... It is not rolled back - see further discharge statistics. In general sgt7 well. But why are they now replace the launcher fouled ???



Rep: (58)
skripnik_n,
It seems, Comradetrickyfck was right. In your case exactly. http://forum.xda-developers.com/showthread.php?t=1623244

Post has been editededkozuto - 30.08.12, 00:42



Rep: (62)
sinko @ 29.08.2012, 23:23*
But why are they now replace the launcher fouled ???

Customization that prevents manually restore the old?


edkozuto @ 29.08.2012, 23:12*
It all started with the fact that I started rutovat Kindle, put the FFF and tvrp through CFI, do not get any reason (due to firmware 6.31, certainly - explanatory manual on rutovaniyu this firmware I have not found). Fastbut I went in and began to sew by hand - lost partitions - Kindle no longer included in general.
Here prompted to close one contact on the PCB and through the linux flash FFF and tvrp through firekit. Happened. BUT! When the firmware is loaded (standard), the plate showed that off (and, in fact, turned off).
I decided to update the FFF through tvrp, downloaded ustanovochnik, threw on the Kindle, and set seems lost partitions again. Again closed contact, I went reusing the FFF and tvrp, but something went wrong, Kindle crashes did not install something, and here it is, the result.
Now, does not go in fastbut not caught either in Windows or in Linux, the closure does not help.

Of course I can not say (it is difficult to understand on the described symptoms), but most likely is now devaysu will only JTAG. Bootloader (u-boot (aka FFF)) flew with the firmware.

Post has been editedLexS007 - 30.08.12, 00:45



Rep: (5)
edkozuto Excuse me please, but believe me, flew to partition, you uh, how partedom try .. And to restore. .
What are the thought you flew? I probably did not understand.
My advice - look for a friend to the iPhone - Kindl put on his charge and will deays am working on the idea)
He would rather this very exhausted ..



Rep: (58)
trickyfck @ 30.08.2012, 07:40*
edkozuto, you'll excuse me, please, but believe me, flew to partition, you uh, how partedom try .. And to restore. .
What are the thought you flew? I probably did not understand.

At least as I have described "disease" symptoms of absolute non-inclusion.
trickyfck @ 30.08.2012, 07:40*
My advice - look for a friend to the iPhone - Kindl put on his charge and will deays am working on the idea)
He would rather this very exhausted ..

There is a charge from the iPad, put a couple of hours. - strongly warmed percent, slightly warmed up battery, but nothing more. Due to the heat decided to continue not to charge.

Post has been editededkozuto - 30.08.12, 11:13



Rep: (0)
Guys, advise what better to put the firmware?
Should I put android is now 4? We not previously advised, saying that he nedopilin. how is the situation with this?



Rep: (58)
snap_46,
hat read carefully. And at least the beginning of the page too.

Post has been editededkozuto - 30.08.12, 12:40



Rep: (35)
snap_46,
worth. herelinks here(Or in the subject header).



Rep: (2)
help people, how to connect a USB flash drive by the fire ???
OTG cable is, the program stikmount too, firmware and SM7 and SM10, works equally bad ... very rarely manage to mount yusb drive, and more often after the restart ... and so do not see anything (
Who can advise on this issue ???



Rep: (35)
airmen77 @ 31.08.2012, 07:14*
Who can advise on this issue ???

Fully charge the batteries.



Rep: (5)
edkozuto Strange, very.
There were already such problems have someone. Read a little about it with the end. Just do not rush to do first, think three times)



Rep: (5)
edkozuto And subject to the xda carefully studied. It should help.



Rep: (4)
airmen77,
airmen77 @ 31.08.2012, 00:14*
help people, how to connect a USB flash drive by the fire ???

Knuzhen active usb hub



Rep: (7)
On the last and penultimate firmware Jelly Bean ROM using SGT7 enhancements flies Google Translate.
Someone may know what is the problem?


Full version    

Help     rules

Time is now: 04/04/20, 17:28