Xiaomi M1, M1S, C1, Youth - MIUI firmware (OS 2.3 - 4.x)



Rep: (1375)
Xiaomi M1, M1 Youth, C1, M1S, M1S Youth -Proshivki MIUI (OS 2.3 - 4.x)
Xiaomi Mi-One, Xiaomi Mi-One Plus, Xiaomi Mi-One S, Xiaomi Mi-One S Youth
Description MI-1 (MI-1 Plus) | Description MI-1S | MI-1 Youth Description | MI-1S Youth Description | Discussion » | Purchase » | Firmware» | MI-1 Plus / MI-1S (MI-1S Youth) custom firmware » | Themes for MIUI v5 » | Xiaomi club »

All manipulations with the firmware of your device you spend on your own risk,
Administration of the forum moderators, curator in the event of a breakdown are not liable.



You just got the phone and you have a lot of questions?
Do not ask stupid questions,
Read first
FAQfrom Antey
or from SetazeR

Drivers, and utilities on the PC
Attached filexiaomi_usb_driver.rar (8.27 MB)

Driver on the PC. Basically we need to flash.
More useful to connect the Internet from your phone to a computer via USB

Attached fileMiFlash20111223.zip(9.07 MB)

Attached fileMiFlash20120303.zip(17.69 MB)

Attached fileMiFlash20120723.zip(9.45 MB)

The program for the firmware via FastBoot

Software for translating the official firmware
B.A.R.T - BurgerZ Android ROM Translator

Firmware
Firmware info
Please note that for the MIUI 2.3 GB in the firmware version number (eg 2.3.5r) indicates the version of Android used to create this firmware,
whereas in MIUI v4 ICS number in firmware version (eg 2.4.6) indicates the date of issue (the first number is '12, this is the second month, and the third is the number)

Changes in the name of the firmware versions - stable and developer version (stable and developer)
Now began daily, weekly and monthly assembly.
monthly = stable, weekly = developer, well and daily for geeks.
more>>>

Just pay attention to the method of needling each firmware. Currently, there are 3 methods. Viarecovery, fastboot and updater.
The method specified in the firmware of the firmware file name. If not specified the likely rekaveri. Detailed instructions in the corresponding spoiler.

Before insertion, especially through rekaveri be sure to charge the battery is not less than 60%

>>>Firmware out on Fridays, respectively, and transfer within a day or two.
To find fresh enough to read the last 3-5 pages.

Official firmware

MIUI v5 (4.1 JB)


MIUIv5 official Chinese version
MIUIv5 translated fromRomz.bz
MIUIv5 translated fromMiui.su

---------------------


MIUI v4 (4.0 ICS)


Monthly (stable) miuiV4_Mioneplus_ICS21.0_fastboot - the firmware language Chinese + English
Monthly (stable) miuiV4_Mioneplus_ICS21.0_recovery - the firmware language Chinese + English
All the versions on Xiaomi.com

Weekly (developer) miuiV4_Mioneplus_3.1.11_fastboot - the firmware language Chinese + English
Weekly (developer) miuiV4_Mioneplus_3.1.11_recovery - the firmware language Chinese + English
All the versions on Xiaomi.com
Changes in the new version of firmware
obsolete v4
miuiV4_Mioneplus_2.12.28_fastboot- the firmware language Chinese + English
miuiV4_Mioneplus_2.12.28_recovery- the firmware language Chinese + English
miuiV4_Mioneplus_2.12.21_fastboot- the firmware language Chinese + English
miuiV4_Mioneplus_2.12.21_recovery- the firmware language Chinese + English
miuiV4_Mioneplus_2.12.14_fastboot- the firmware language Chinese + English
miuiV4_Mioneplus_2.12.14_recovery- the firmware language Chinese + English
miuiV4_Mioneplus_2.11.9_fastboot- the firmware language Chinese + English
miuiV4_Mioneplus_2.11.9_recovery- the firmware language Chinese + English
miuiV4_Mioneplus_ICS20.0_fastboot- the firmware language Chinese + English
miuiV4_Mioneplus_ICS20.0_recovery- the firmware language Chinese + English
miuiV4_Mioneplus_2.11.5_fastboot- the firmware language Chinese + English
miuiV4_Mioneplus_2.11.5_recovery- the firmware language Chinese + English

Older versions look onoffsite

---------------------



MIUI v2 (2.3 GB)

Not suitable for M1S

miui_Mioneplus_2.3.6f_fastboot- the firmware language Chinese + English
miui_Mioneplus_2.3.6f_recovery- the firmware language Chinese + English
All the versions on Xiaomi.com

2.3 obsolete

---------------------



Android 4.0

Pure Android 4.0

Mioneplus_QDR66_fastboot_Android_4.0- fastbut version
mione_plus_ota_QDR66- OTA update package
All versions of the Chinese website
Changes in the new version of firmware
Outdated
Mioneplus_QDR65_fastboot_Android_4.0- fastbut version
Mioneplus_QDQ61_fastboot_Android_4.0- fastbut version
mione_plus-ota-QDQ61- rekaveri version
Mioneplus_QDO53_fastboot_Android_4.0
mione_plus-ota-QDO53- Not sure what it is and why ota in the title, but judging by the weight and appearance of this firmware for rekaveri.

---------------------



Android 4.1
-
Pure Android 4.1 - BETAVERSIYA

Mioneplus_QDS81_fastboot_Android_4.1- betaversiya, fastbut
miui_NativeMioneplus_QDS81_4.1- betaversiya, rekaveri


Custom firmware
Custom - different versions of firmware that are not only the translation into Russian, but also other changes.

AOKP (4.2.2 JB)


AOKP - Android Open Kang Project

---------------------


Cyanogenmod 10.1 (4.2.2 JB)


Unofficial CyanogenMod 10.1

---------------------


MIUI v5 (4.1 JB)


MIUIv5 assembly ofkiriego19
MIUIv5 mod fromDriffex
MIUIv5 assembly ofAndrey_TypeR
MIUIv5 mod fromAntey
MIUIv5 mod fromForm74

---------------------


MIUI v4 (4.0 ICS)

Miui v4 byDriffex
Miui v4 byNekto1973
Miui v4-based AU (14.02.2013) fromAntey
Miui v4 bybzz11g

Outdated

---------------------



MIUI v2 (2.3 GB)

Not suitable for M1S

23.09.2012 - 2.3.6f CDMA from zeluck
21.09.2012 - 2.3.6f from Ervan_vz
08.06.2012 - miui_Mioneplus_2.3.5y_signed.zip- Russian from Form74
24.05.2012 - sumiui_Mioneplus_2.3.5v_signed_RUS_BurgerZ
17.04.2012 - MIUI 2.3.5s GBRUS by Burgerz.pro(Stitching through updater top 2.3.5s Chinese official analog)
04.04.2012 - MIUI 2.3.5r GBRUS by Burgerz.pro(Stitching through updater top 2.3.5r Chinese official analogue) ( mirror Yandex.Disk )
Stable assemblyin Russian translation MIUI.su(Currently 2.3.5k)
Beta-assemblyin Russian translation MIUI.su(Currently 01/12/23)
06.03.2012 - Russifier for 2.3.5n version v1_updater
06.03.2012 - Russifier for 2.3.5n version v2_updater
---------------------




Android 4.1

Unofficial CyanogenMod 10
Lennox OS from Lenny Kano
---------------------



Android 4.0

Pure Android 4.0

09.11.2012 - QDR68 from DremoFF(Perhaps the lack of the translation)
16.09.2012 - QDR66 from zeluck

Additional links to firmware
we can take in our common DropBox archive
without codes, expectations and at a good speed (replenished in a timely manner)

Latest firmware versionsis here (Chinese official website)
All versionsis here (china, almost full story)

The latest official firmware at high speedcan be taken here.

Gapps
Installation via rekaveri. Before installing, make sure that the firmware is not yet sewn the necessary gapps

Gappsy for MIUIv5 (JB)
Gappsy for MIUIv4 (ICS) direct link


Instructions
How to enter recovery and fastboot:
a volume up button pover + = rekaveri (Recovery)
with the volume down button + = fast power metal bottles (Fastboot), or any volume + power + MI, the only way out to remove the battery

Before insertion, especially through rekaveri be sure to charge the battery is not less than 60%

Increasing the size of the system partition

How to determine the firmware rekaveri or fastbut
Firmware rekaveri looks like this:
Attached Image
it is not necessary to decompress. Only rename update.zip

Firmware fastbut looks like this:
Attached Image
it is necessary to decompress in a folder

Firmware with Recovery
  1. Install the driver
  2. Download the firmware
  3. We upload the firmware in the update.zip format to the root of the memory card (/sdcard/update.zip)
  4. Turn off the phone
  5. Hold the volume up key + power button
  6. We are waiting for download in recovery mode
  7. Choosing English
  8. It is advisable to make a full wipe
  9. Select the item update from sdcard
  10. Choosing Fail firmware previously carried over
  11. We are waiting for the completion and select reboot to system
Firmware with the aid FastBoot + MiFlash Tool
Firmware using MiFlash Tool and through FastBoot
Through miflesh sewn only official firmware

Training:
Download the correct firmware (for example spoiler "Official firmware") Extract the archive. It should look something like the image below.
Attached Image

DownloadMiFlash(A program for flashing) (there is a spoiler Drivers and Utilities)
It is advisable to sew Mioneplus recovery 1.1.0 (if you are already sewed it no more) (if already on 1.1.0 firmware 2.3.5k after installation it is necessary to ask why they are something different, though one version ... you can download it in the spoiler " Miscellaneous")
View rekaveri, WIPE - Wipe all, then WIPE - Update system partition. At the end turn off the phone.

Firmware:
Translate phone FastBoot mode. To do this, the phone off it is necessary to hold down the button, "Volume minus" and "Enable" (available as an option with the third button clamping, MI, but should be enough for two)The machine should be charged!)
A picture will appear with a hare with a hat, which repairs the android. Phone in FastBoot mode.
We connect the phone to the computer, Run MiFlash.
Use the button Browse,indicatefolder with the unpacked firmware.
Attached Image

Attached Image

The Refresh button is needed to determine the phone if you have it hooked up after starting the program, or it is not defined for any reason.
Total program should look like in the screenshot.
Attached Image

Press the Flash button(At your own risk, no one is responsible for anything except you).
Wait for the program to complete its work. The phone will reboot and turn on automatically.
Attached Image
Firmware using UPDATER
UPDATER is a program originally installed in the phone.
Download and install it is not necessary, you just have to find)

We go to the updater, Hit menu>select installation pack - select the desired file (in advance carried over the stick)>flash>at the end of the machine reboots


The firmware is placed in the other system partition after rebooting automatically loaded into the desired section.
If you want to return to the previous then choose reboot recovery (not to be confused with the reboot to recovery, which is a load you rekaveri) - roll back to a previous firmware or just boot from the previous section.

ATP trovix
How to flash on MIUI v4 ICS 2.3.5 with - helpful for those who have just received the phone)
How to revert to the MIUI v4 ICS 2.3.5 on
Sew through MiFlash Chinese 2.3.5 (2.3.5k) then through rekaveri Russian analog (2.3.5k)
As upgrade via OTA packet (downloaded manually)
You download the desired package
You throw in a folder on the memory card downloaded_rom
trovix @ 24.02.2012, 12:57*
1) enter the updater (the program is in the phone)
2) menu ->select installation pack
3) Select the downloaded package in advance
4) install.


Installation 2 different firmware on the phone at the same time
painted in detail here.thanks dutch_2007



Recovery
TWRP 2.6.0.0

CWM 6.0.3.2 TrueDual Boot

CWM 6.0.3.0 TrueDual Boot

Description CWM-based Recovery v6.0.3.0 from SetazeR
Navigating the Recovery occurs with the volume keys. Selection of items - the power button.

ENABLE / DISABLE TrueDualBoot - Enable / Disable the independence section / data for both systems
reboot system now - restart the current system
install zip from sd-card Installing the zip-archive to the memory card
After selecting the archive will be offered a choice of system into which it is to flash
- choose zip from sd - Select any file from a memory card
- apply /sdcard/update.zip - Set it update.zip to the root of the memory card
- toggle signature verification - Switch firmware verification of signatures
install zip from sideload - installation of the archive via adb sideload (output from the battery alone pukto Unplugging)
wipe data / factory reset - delete all user programs and return to the "factory" settings. (Formatting partitions / data and / cache)
wipe cache partition - Clear the cache (formatted partition / cache)
backup and restore - Backup and restore
- backup - Backing up the firmware. After selecting which system you will be prompted to save: the first, second or both.
- restore - the restoration of previously saved copy. If retained only one system, it proposes a choice - to restore in the same partition or on top of another.
- delete - deleting backups
- advanced restore - granular recovery of individual components of the backup
- free unused backup space - "removes the files associated with the remote backup is used only if as a storage format backups of selected dup format..
- choose default backup format - to select the format of the backup: tar (default) or dup.
mounts and storage - connect, disconnect and formatting different memory partitions (Connecting a memory card to a computer via USB does not work yet)
advanced - "advanced" operations
- reboot recovery - reboot rekoveri
- wipe dalvik cache - clearing the cache Delvik machine
- report error - copying the log rekoveri memory card.
- key test - Function Check the hard buttons. Because the touch buttons do not work - the output from the battery alone Unplugging
- show log - "Log Viewer". Apparently banishes all previously derived information afresh.
- fix permissions - Edit permissions for system files. There is a choice of which system to do it.
- partition sd-card - some Partitioning sd-card. Available range of sizes from 128MB to 4GB. (As will be explained appointment - I will add)
- active system: 1 (or 2) - the choice of the current system, in which the device will be loaded after a reboot of rekoveri

LennoxRecovery


Attached filemiui_updater_v.0.2.8.1.apk(178.59 KB)
MIUI.SU Updater - A small utility for a smartphone that allows you to keep track of the firmware update online miui.su and produces its load. version 0.2.8.1
Please note that the Updater and MIUI.SU Updater are two different programs.

Rekaveri 1.2.0 and 2.0.0
Attached fileMioneplus_recovery_1.1.0.rar(5.91 MB)
Mirror Yandeks.Narod Mioneplus recovery 1.1.0
How to install recovery
View fastbut (Power + volume button, any button + MI)
connect your phone
Run the file flash_recovery.bat
The device turns off.
I waited a moment, tried to include, in any way, remove the battery, wait a bit stuck, all inclusive.

If you have already installed Recovery and you want to update it or put another zip sewn with recovery as a normal firmware


Interesting posts

Known problems and their possible solutions
  • Similar questions about mobile communication, "Why can not reach the subscriber from the first time ..?", "Why is it sometimes disappears link ..?" Will be deleted without warning!
    After much discussion it turns out the same conclusion:Firmware is not to blame!In most cases, the problem is in your operator or sim card. read morehere
  • If the problems with GPS it is possible to try different gps.confhere, hereandhereeg.
  • In MIUI V4 buggy vayfay if the router only Including 802.11g or 802.11n Put the mix.
  • Error 101 when trying to download a program from the convenience store.Read more posts after this. It helped me a way to "remove, then add Google account."
  • В® TimeZone FixerProg to change with time zone Moscow GMT +3 on GMT +4
  • If the firmware is not syncing with Google account, you must install these 3 apps and restart the device.
    The synchronization settings should appear the options you want.
    Attached fileSync.rar(2.35 MB)
    Mirror



Poll results
Attached Image

Attached Image



WSM Project ®

If you have any suggestions about the cap, write to the QMS

Post has been editeddraiv88 - 13.03.18, 02:05
Reason for editing: Editing header



Rep: (609)
M
Cap raised, moved the topic.
Pleasant and fruitful discussion;)



Rep: (17)
bzz11g @ 29.11.2011, 18:22*
Hold the volume up key + power button

and where such information is accurate?
and as far as I know there is a double loader, can you tell me more about it, if there is something, well, I mean no problems with it at the intersection firmware?



Rep: (3)
Actually a couple of questions. 1,12,9 install the firmware to your phone. I am trying to sync with the Google account in the account as he enters but does sinhranizatsiyu. On the Android Market there is no phone in the list of compatible devices. By the way in the private office of Google, he was prescribed Xiaomi MI1 Plus. How about this?



Rep: (22)
and you do what? in E van 1GHz, at E van plus 1.5 GHz.
Dual boot loader allows you to store 2 system of rekaveri can choose what to boot.

By the way about the instructions:
Hold the volume up key + power button

If you hold down the volume down + power, then turn on fast bottles menu with funny hare hat Soviet payayuschim android, and if you hold the volume up + power, we get rekaveri.
management rekaveri:
volume - Up / Down
food - DC
In addition to dual-boot loader is nothing interesting is not found in rekaveri of a custom ... and as I understand it does not have (or even backup system to make the whole hunting on your phone)



Rep: (149)
Link "Discussion" in the first post did not work ...

xopycaku3 @ 27.12.2011, 18:59*
and you do what? in E van 1GHz, at E van plus 1.5 GHz.

INFA from the lantern? Gigahertz nobody has seen yet)


>>>Xiaomi released off the beta of Android 4.0<<<

More write instructions for firmware ... That is transferred from the link above)
Firmware using MiFlash Tool and through FastBoot

1 Download the correct firmware (for example,here,of the links above, it is not necessary to decompress) (MD5: CDCA3426D643439C9596B8140CB3EA61)
2 DownloadMiFlash(A program for flashing) (MD5: 7D2D299E3138872CC524DF9DFD461333)
3 Switch the phone FastBoot mode. To do this, the phone off it is necessary to hold down the button, "Volume minus" and "Enable" (available as an option with the third button clamping, MI, but should be enough for two)The machine should be charged!)
A picture will appear with a hare with a hat, which repairs the android. Phone in FastBoot mode.
Attached Image

4 Connect your phone to a computer, run the MiFlash.
5 Use the button Browse, specify the firmware file. (On the off site why it is written, insert the path to the firmware in the address bar manually, maybe Browse more button does not work (Refresh button is needed to determine the phone if you have it hooked up after starting the program, or it is not defined for any reason. Total program should look like in the screenshot.
Attached fileQQ__20120117203004.png.thumb.jpg(27.7 KB)
Attached Image
6 Press the Flash button(At your own risk, no one is responsible for anything except you). Wait until the program finishes its work. Phone will reboot and turn on automatically.
Attached Image







Post has been editedK-User - 20.01.12, 12:43
Reason for editing: + from colombo_nik



Rep: (58)
DremoFF @ 20.01.2012, 07:49*
>>>Xiaomi released off the beta of Android 4.0<<<


Prompt sewn necessary to wipe?
And as the firmware - is worth it or not?



Rep: (149)
Yes, it is always better to wipe sewn, the more the other version of the android.

I do not know, I do not even phone the



Rep: (0)
I understand that the Chinese forum wrote that the return to the firmware back to 4.0 2.3.5abcdefgj can not, because there seems to be incompatible chargers, it is, as I understand, when the firmware is updated to version 1.1. But maybe something I do not understand, because the Chinese language.



Rep: (0)
Somehow, after flashing "beta build from 1/11/25 to Russian" fallen off synchronization with Google account - missing import contacts directly (in Chinese wasps could tie), and through binding Akka also did. At the same time the EU is nothing but the android Market is not to pull, as he says he is no reference to your body. Sadness.



Rep: (11)
This has already been written. Install GMail app, and everything will be ok.



Rep: (0)
Translated 2.3.5j firmware using a program with miuirussia, moved up like normal without errors, but does not want to put, as I ask not signed in rekaveri there is no option to disable signature verification, tried to sign test key program signapk - not a ride. Maybe someone knows how to get the key for the signature of the firmware available? Or that even in such a case can be made? Guys with miui.su because as it is transferred and posted'm signing archive.



Rep: (11)
And in the official firmware has English?



Rep: (0)
Yes, but not always, a lot of things in Chinese.



Rep: (0)
Having dealt with the signature on the sly translate firmware 2.3.5j.



Rep: (26)
reflash, with a full wipe on 2.3.5k
I found that there is no Google services, delivered as sdes advised, GMail.
the opportunity to sync mail, contacts still do not sync.
downloaded Chinese 2.3.5k thought it may have, but it is not put (swearing on the signature)
but there is likely to Google services, then it is not.
wondering just me or has anyone?
I try to find Google Services, a separate update and rolled forward from the top.



Rep: (24)
colombo_nik,
I also had, I think wrote.
the result: put gmeyl, market, contacts and were not synchronized, they took off the stick and tlefonom otkryla.2 minutes ago



Rep: (0)
Chinese version simply can not swear to sign you to the official website of it rocked?



Rep: (26)
Kcabbu @ 23.01.2012, 14:06*
you to the official website of it rocked?

on off. Online hammered 2.3.5.k and barely barely through the Chinese characters downloaded 110 megs.
if anyone has a complete Google services or Google services separately -Share :)
I also had, I think wrote.
the result: put gmeyl, market, contacts and were not synchronized, they took off the stick and tlefonom otkryla.2 minutes ago

and I did, but it's not an option for me.



Rep: (30)
I wipe did not do a reflash 2,3,5h on 2,3,5k (Attached filesumiui_Mioneplus_2.3.5k_signed.zip(92.6 MB)
) - all remained in place and everything works (mail, contacts)
I tookhttp://miui.su/proshivki/stabilnaya-versiya
Will testit more ... see how they - noise sensor repaired or not ...



Rep: (26)
ren69 @ 23.01.2012, 14:30*
Did wipe

If i knew.....


Full version    

Help     rules

Time is now: 04/03/20, 7:58