Digma iDx7 - Firmware
Poll rom.
What firmware do you consider the most successful?
Stock 2.2.1 [ 29 ] ** [3,93%]
Stock 2.3.4 V0.24 [ 129 ] ** [17,48%]
Stock 2.3.4 V0.14 [ 30 ] ** [4,07%]
Stock 2.3.4 V0.13 [ 48 ] ** [6,5%]
Stock 4.0.3 V0.04 [ 204 ] ** [27,64%]
CyanogenMod 9 from vl (@) d [ 74 ] ** [10,03%]
4.0.3 from sfstudio (0.6.h) [ 20 ] ** [2,71%]
4.0.3 from sfstudio (0.7.h) [ 120 ] ** [16,26%]
Others (from similar devices) [ 84 ] ** [11,38%]
Total Votes: 738
 



Rep: (199)
Digma iDx7 - Firmware
PictureDigma iDx7
Description | Discussion пїЅ | Digma iDx7 software and games | Firmware пїЅ

Important information!
IMPORTANT : Our device exists atTHREE FOURfive variants :
  1. With sink iOS2.2.1 (Written on the box 800 MHz, sn: DIDX7BK83 H1106 00001 ~ DIDX7BK83 H1106 99999 and DIDX7WT83 H1106 00001 ~ DIDX7WT83 H1106 99999), hereinafter Type 1
  2. With sink iOS2.3.4 (Written on the box 1000 MHz, sn: DIDX7B * 83 H1110 00001 ~ DIDX7B * 83 H1110 99999 and DIDX7W * 83 H1110 00001 ~ DIDX7W * 83 H1110 99999), hereinafter Type 2 ( There is a single mismatch )
  3. With sink iOS2.3.4 (Written on the box 1000 MHz, sn: DIDX7B * 83 H1111 00001 ~ DIDX7B * 83 H1111 99999 and DIDX7W * 83 H1111 00001 ~ DIDX7W * 83 H1111 99999), hereinafter type 3 . In general, up to 05.03.2012 for Type 3 Suitable firmware from Type 2. It can already say with certainty the identity of the type 2 and type 3, but the manufacturer of their allocated into separate types.
  4. With sink iOS Android 4. (on the box is written, Android 4, sn: DIDX7BC83H111102041 ~ DIDX7BC83H111199999 and DIDX7WC83H111100307 ~ DIDX7WC83H111199999) Latertype 4 . Android 4 is identical to Type 3. no hardware buttons on many plates of this type are "back", "home" and "Settings".
  5. With sink iOS Android 4. (on the box is written, Android 4, DIDX7BK8C43H120 ** ...)type 5 . On all plates of this type are no hardware buttons "Back", "Home" and "Settings".

In any case - for the first three types of matter only the combination of H and four digits. * - any sign.
If you put the firmware for the Type 2 or Type 3 and you can not touch works, then you have Type 1 (if not exactly the type 4), just juggle the firmware. All custom firmware to 5 March 2012 for type 3 are suitable from Type 2.

Newbie.

Official firmware
for devices Type 1


Firmware is not on our device, but suitable for Type 1 (Operability is not guaranteed. )


In each of the firmware has a link to their corresponding market, with the exception of pre-release and firmware from Qumo 2Go.


for devicesType 2



for devicestype 3


for devicestype 4




for devicestype 5



A brief, general instructions for installing firmware version 2.3.4: Digma iDx7 - Firmware (Post # 12425614)

Custom firmware
for devices Type 1


for devicesType 2


for devicestype 3


for devicestype 4


for devicestype 5





A brief, general instructions for installing firmware version 2.3.4: Digma iDx7 - Firmware (Post # 12425614)

Test firmware fromsfstudio lie here: http://sourceforge.net/projects/wive-ng/files/wive-ng-idx/ . change log: Digma iDx7 - Firmware (Post # 13928445)

Marketa
Markets for 2.2.x and 2.3.x are different! Rolling the market from one version of the firmware to another - get a cyclic reboot ... But do not worry, from the engineering menu, put the desired market and everything will be fine :)

Useful topic:GOOGLE PLAY Market - Technical issues
Only market without gaps:Google play

Ruth
If you do not know what a root is, then do not do it better, otherwise:


Mini HOWTO for installing patches, market and root
Installing updates / patches (not the entire firmware) is done as follows:
1. It is desirable for a clean and efficient memory card (it does not hurt to format it in FAT32, becauseThe tablet is updated only from cards formatted in FAT32 ) put the file update.zip.
2. Run the item "Local Upgrade" from the "Upgrade" application, in which specify this update.zip. In some firmware, the Upgrade application is called SW Update.
3. Run Local Upgrade (reboot required), wait ... enjoy the result :)
If for some reason it did not pass, you can try to perform the update from the engineering menu by selecting "apply update from sdcard".
Just know the situation in which the update does not pass without the files contained in the firmware, then take out the firmware, all files except update.zip (uImage, uImage_recovery, u-boot-512M-UartB.bin).

Access to the engineering menu is provided:
1. Turn off the tablet
2. Remove the memory card (preferably, so that the uncontrolled update process does not start)
3. Press and hold the "Volume +" button
4. Press the Power button.
5. Wait for the download :)
Some feature in the software and hardware solutions sometimes requires the inclusion of engineering menu with AC adapter ...

If you made a mistake with the firmware, made a mistake with the firmware, got a brick then:
If the wrong version:
It's simple, take the firmware toyour his devices and quietly put it under the instruction of the Engineering menu links above.

If you killed the recovery:
Digma iDx7 - Firmware (Post # 10687488). Working with a live uboot.

Solving the problem - no internal flash is visible

Disaster recovery bricks v2. Based on Android 2.3.4
If you got a brick

Firmware error "less_then_int", earlier firmware for later -Digma iDx7 - Firmware (Post # 11277272). Error example -screenshot

Any other (problems and solutions, patches, etc.)
All about 3G modems

Adrenaline engine
A brief explanation about the "rubber" touch to type 1

Increase microphone sensitivity


How to run "glutton" on a tablet USB-host

Remove hissing sound in 4.0.3:Digma iDx7 - Firmware (Post # 12873701)

The patch increases the size of the data section of up to 1.5 GB for Android 4.0

Android 4.0.3 - Problems with Skype (pink stripes)

In our Android 4 no access point, one of the solutions:Digma iDx7 - Firmware (Post # 12965032)

Calibration screen android 4

Addressing White Screen / Invert Colors

in communication with the SC instruction and / or store in the event of problems [prototype / not ready]

A patch that increases the size of the data section to 2GB. (Please note that the patch depends on the firmware version! )

Install updates from internal memory.

Resetting the tablet to the factory (Factory reset)

If the tablet hangs when loading

If there is no flash drive, or you want to use the internal flash as an sd card (like installing software there), then:Digma iDx7 - Firmware (Post # 9481412)

For those who have noticed what does not workSPB TV I advise you to look into the Digma iDx7 - Firmware (Post # 9268123) Where vl (@) d adds fixes, Ruth and other ...

Solving the problem - not visible from the internal flash (internal memory) All options.

Restoring internal flash / Solving the problem - no internal flash is visible.

Restoring internal flash / Solving the problem - no internal flash is visible. + clear user data

MiniFAQ on Digma iDx7

Increase sound volumeaccording to reviews works with us. Attention! The speakers are flimsy, do not sleep.

It turned out to make the usual Chinese gamepad work on our little animal.

One of the recovery options for serious firmware issues:Digma iDx7 - Firmware (Post # 10687488)

Briefly aboutbuild.propThe keys we tested are marked separately. It also turns on the externalGPS receiver.

SmallFAQon the engineering menu / recovery.

InstallationAC3 license (if it does not exist): Digma iDx7 - Firmware (Post # 11306138)

If you do not roll with the firmware fromvl (@) d (And possibly other), then: Digma iDx7 - Firmware (Post # 11277272) or Digma iDx7 - Firmware (Post # 11277078)

WIFIAd-hoc (one rank network, for example, computer - tablet) Digma iDx7 - Firmware (Post # 11344394) Digma iDx7 - Firmware (Post # 11333501)

Indicative algorithm for restoring internal flash.

Short about flash

CPU Modes

For developers...

Update history caps


There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.

Post has been editedsnekt @ - 08.04.16, 00:43
Reason for editing: Sources from AMLogic



Rep: (-1)
Regarding the firmware link for IDX 7:

in the address specified

http://ddixlab.ru/forum/viewtopic.php?t=1995

there is really a firmware, but instructions for its installation on my device
It did not work: the firmware is posted as a RAR archive and FW Update does not see it.

I remove from this RAR archive file Update..zip, removed from the file name an excessive point before ZIP
And recorded this zip archive to the card separately. Then FW Update saw him and quickly set A-Market
And another number of google applications.

Post has been editedNewview - 17.09.12, 21:37



Rep: (199)
http://ddixlab.ru/forum/viewtopic.php?t=2103

And there:

New firmware 0.56.
How to flash:
1. Copy the contents of the file to the memory card
2. Insert the memory card in a book
3. Select settings in FWupgrade
4. Select upgrad and wait for the boot

Download link:
http://www.ddixlab.ru/download/digma/ipad/...fw_idx7_056.zip.

Fixes:
- Fixed a 3G modem (the modem is not able to run in the list)


Market for version 0.56
How to flash:
1. Copy the contents of the file to the memory card
2. Insert the memory card in the book (already included )
3. Select settings in FWupgrade
4. Select upgrad and wait for the boot
Download link:
http://www.ddixlab.ru/download/digma/ipad/...idx7_market.zip.

3G instruction will be later (if briefly - put the firmware, market + z4root)
Klava was not corrected while (((
If what is wrong - write

Post has been editedNewview - 16.01.12, 14:33



Rep: (0)
Hello! Tell me please, is there any factory (without market) firmware on Digma IDX7?
And it seems to me, or in the new firmware 0.56 does not work automatic screen rotation? (in the settings it is marked)



Rep: (0)
Narrata @ 09/20/2011, 09:55*
Hello! Tell me please, is there any factory (without market) firmware on Digma IDX7?
And it seems to me, or in the new firmware 0.56 does not work automatic screen rotation? (in the settings it is marked)


Check in the settings, the nodole is removed by itself.
At the last firmware, I did not see problems with auto-rotations.



Rep: (0)
For firmware, MICRO SD has. Or can you put on your own memory?



Rep: (6)
I join the question Aiperon91!



Rep: (35)
Silted with an SD card, the inner flash does not see when the firmware.



Rep: (1)
everything was stitched from the first time, the market works with a bang)
did as described above.



Rep: (0)
Pasans and warranty does not flit if I put it?)
And who fuck in this matter, about 3G modem I want to ask, not in Padlu, what is better to take on it to be problematic not (some kind of cheaper), or add ver.visker in a sauke, I am very grateful



Rep: (3)
And I decided to check this miracle in neopore, and he showed me 39,5QADricks, like the result is a medium! But for some reason, Dead Space and Need for Speed ​​Shift, work hrenovo, the textures are absolutely no, why? It is not clear, because with such flattening, they must normally go! or not in the device?



Rep: (3)
Checked re-issued 43.4fps!



Rep: (10)
Khotabych05,
And what version are you set ??? Take everything .apk and cache, which on Galaxy S II go, because Video acupunists at Digma and SGS 2 are the same !!!!

Post has been editedcomed1ant - 02.10.11, 16:12



Rep: (199)
News from the manufacturer (type):

IDX7. Android OS update to version 2.3.4 (BETA)

There:

Attention!
This update is only for those IDX7 tablets, in which OS 2.2.1 is initially installed. If you have 2.3 installed in your tablet, then in no case use this update.
1. Reference is not mandatory. All actions you make at your own risk.
2. Entering the new firmware, you must understand that the new test firmware can potentially condemn errors.
3. After updating the firmware, the warranty is not lost, but if a failure occurs during the firmware - warranty liabilities are lost.

http://www.ddixlab.ru/download/digma/ipad/..._2.3_update.zip.

The procedure for updating.
1. Make backup all data.
2. Hold the MicroSD cardSofomat her (no files besides the firmware there should be no) in the FAT32 system .
3. Charge the tablet. Unpack the archive to the root of the memory card.
4. Connect the power adapter
5. Turn off the tablet.
------ = Memory Card Do not insert = ------------
6. Press and hold the "Volume +"
7. Press the Power button
8. After the inscription Upgrading wait for the boot menu.
------ = Insert the memory card = -------
9. The "Volume +" key, select Wipe Media Partition and go to it with the "Volume -" button
10. The "Volume +" key, select YES-DELETE ALL MEDIA DATA and confirm with the "Volume -" button.
11. The "Volume +" key, select WIPE CACHE PARTITION and select it with the "Volume -" button
12. The "Volume +" key, select WIPE DATA / Factory Reset, log in to it by clicking "Volume -"
13. The "Volume +" key, select Yes-Delete All Media Data and confirm it with the "Volume -" button
14. The "Volume +" key Select the Menu item Apply Update From SDCard (If necessary, specify Update.zip), confirm with the "Volume -" button
15. Wait for the update.


Installing a market for Android 2.3.4
1. Download the archive:http://www.ddixlab.ru/download/digma/ipad/..._a23_market.zip.
2. Unpack the archive to the root of the memory card
3. From the menu, select Upgrade -> Local Upgrade ---> Update.zip
4. Select Reboot & Install.

P.S.No one guarantee that you do not give! Even the manufacturer! All your fear and risk.
P.P.S.The memory card is strongly recommended to format.
P.p.p.s. The instruction is not mine, where it is taken -SpecifiedBut! The compiler itself wrote about the firmware P4: "When the power supply is connected, the tablet is not turned off. You need to turn off the power wire, turn off, connect again." I stupidly did not insert the cord at all, only well charged.
P.P.P.P.S.Attention! Practice has shown that all updates need to be put by leaving all the files from the firmware on the flash drive, except for update.zip, for updates usually fold in Update.zip :)

Post has been editedNewview - 14.10.11, 17:39
Reason for editing: Added another p.p.p.p.s.



Rep: (0)
Owners.
Say plz how many IDX7 is charged with a minimum 5-10% to 95%.
Interested in how quickly you can fully charge and use again.
Here, many wrote that they put on the night, but I wonder if the battery was discharged in the first half of the day, how quickly you can get a fully charged animal again.

Thank.

Post has been editedCritic - 03.10.11, 22:05



Rep: (2)
Newvid @ 03/10/2011, 22:13*
This update is only for those IDX7 tablets, in which OS 2.2.1 is initially installed. If you have 2.3 installed in your tablet, then in no case use this update.

And what in idx7 is set 2.3 version?



Rep: (0)
Charges about 2-3 hours with full discharge, but the charge shows 99%
from 99% to 100% I have been charging another 5 hours ...
I do not know exactly why so ... maybe not calibrated an accumulator ...



Rep: (199)
Golant @ 04/10/2011, 10:24*
Charges about 2-3 hours with full discharge, but the charge shows 99%
from 99% to 100% I have been charging another 5 hours ...
I do not know exactly why so ... maybe not calibrated an accumulator ...


With calibration - a well-known "feature" of all Chinese, it is necessary to understand that the charge level is calculated by indirect characteristics.
The time of the total charge of a similar battery from zero, with a simple algorithm of at least 7-8 hours, especially in front of.

I would recommend the first time in the battery, "i.e. discharge to percent 15-20, then chargenot less 10 - 12 hours. So you can "harden" your battery, extend its life and use its capacity to the full coil (as if paradoxically sounded).

P.S. Walking makes sense when buyingright away , it is desirable three times.

P.P.S. Some colleagues are recommended to discharge when the battery rolls up to the automatic shutdown of the device (ie, about 5-10%). But not in the star, and in ordinary life I would not recommend discharging the battery "to zero", for no battery (regardless of the production technology) does not like absolute discharge.

Post has been editedNewview - 04.10.11, 12:31
Reason for editing: Added P.P.S.



Rep: (108)
I put today 2.3.4, two problems arose - how to get a root (now in search of an answer) and the inability to turn on the device (if previously turned off) when the power supply is connected. While the bugs no longer found anymore. Work is smart, the brakes are not marked, the flash drive sees without problems, errors with reading flash drive or error checking



Rep: (199)
Surgeonman @ 04.10.2011, 13:28*
I put today 2.3.4, two problems arose - how to get a root (now in search of an answer) and the inability to turn on the device (if previously turned off) when the power supply is connected. While the bugs no longer found anymore. Work is smart, the brakes are not marked, the flash drive sees without problems, errors with reading flash drive or error checking


A colleague works above the rootvl (@) d here



Rep: (199)
Surgeonman @ 04/10/2011, 13:48*
Newvid, thank you, I read it already. I think it is advisable to discuss the way ROOT more appropriate in the firmware topic, and not in the topic discussion


I completely agree. It seems to dig it in Ruta here:Getting root in one click

The first reviews of 2.3.4 are contradictory, with AC problems.


Full version    

Help     rules

Now: 21.01.21, 14:52