Huawei U8500 - CyanogenMod



Rep: (1040)
Huawei U8500 - CyanogenMod
Attached ImageHuawei U8500, MTS Evo, Beeline E300
Description Huawei U8500 | Description MTS Evo | Description Beeline E300 | Discussion пїЅ | Embellishments пїЅ | Firmware пїЅ | MIUI пїЅ | Club HUAWEI пїЅ | Club Huawei U8500 пїЅ | Tips to improve power saving devices on Android OS | Android OS FAQ | Android - Glossary

Important information!
  • This topic was created exclusively for discussions of all versions of CyanogenMod firmware.
    For more information on the CyanogenMod project follow the link tosite of this project.
  • Currently, none of the CyanogenMod assemblies for Huawei u8500 is stable. Therefore, all the firmware discussed in this topic is not recommended for installation for beginners. You do everything at your own peril and risk.
  • On some firmwares there is overclocking! It is not recommended to set overclocking to more than 710Mhz! The processor may burn!
  • CyanogenMod need to be installed on top of android 2.2!
  • None of the assemblies does not work and the radio will not work!
  • The most stable firmware CyanogenMod:CyanogenMod 7.2.0 by $ aNek011 Update 11
  • If you want your development / mod / firmware to be in the header, write to me in the LAN about it, indicating the name of your development / mod / firmware and a link in which there is a full description!
Drivers and Utilities
Android SDK Tools
Easy tools from Graevka - A program to help beginners to install drivers, clean up sections of the phone, firmware ClockworkMod, creating an Ext section with detailed step-by-step instructions.
Firmware
The fastest firmware speeds
Test build Android 4.0 Ice Cream Sandwich
CyanogenMod7 by $ aNek011
CyanogenMod 7 by Real .....
CyanogenMod 7 by AnsonKlavs
CyanogenMod7 by Slax
CyanogenMod7 by Slax SP10
Mini instruction to CyanogenMod7 by Slax SP10
1. Before the firmware, it is desirable to make wipes.
2. Firmware is installed via fastboot by clicking on "windows 2.3.bat"
3. Google applications are put through recovery (the Gapps_CM7 archive by Slax SP10.zip must be written to the memory card in advance)
4. To solve problems with GTalk, you need to erase the Google Services Framework application data (settings - applications - application management - all - Google Services Framework - click to erase data)
5. After the firmware, it is not recommended to do wipes - some of the screen locks disappear (including a graphic key)
6. can also be putpatchwhich should fix problems with the volume of the call. But I rolled back the patch. after installing it, periodically instead of ringing, a wheeze was heard And someone helped. If there are no problems with the volume - do not put.
Josy
Original firmware + Russifierfromwebscom ( clicking on links causes autoload! )
MOKEEOS
Joy os
Remaining firmware
If the firmware does not have pre-installed Google-services (market, maps, etc.), then download and installGoogle-Apps (Install via CWM Recovery)
ClockWorkMod Recovery
Installation Instructions ClockWorkMod Recovery via Fastboot
1. With the smartphone turned off, press simultaneously the key combination “hang up” + “volume down” + “power button” and hold for a few seconds.
2.Connect the smartphone to the computer via USB-cable.
3. From a previously unpacked archive with firmware, launch the file with bat permission
4. After the firmware, we take out the battery for 5 seconds.
Installation Instructions ClockWorkMod Recovery without a computer
Instructions on how to do backup (Backup), Wipe (Wipe) and Recovery firmware (Restore) via ClockWorkMod Recovery 5.0.2.0
ClockWorkMod Recovery 5.0.2.0
ClockWorkMod Recovery 5.0.2.8 by $ aNek011-Fastboot version
ClockWorkMod Recovery 5.0.2.8 by $ aNek011-Recovery version
CWM-Recovery 5.5.0.4 by $ aNek011 for Recovery
CWM-Recovery 5.5.0.4 by $ aNek011 for FastBoot
Firmware installation instructions
Installation via CWM recovery
1. We start the archive with the firmware on the sd card.
2. Go to clockworkmod recovery (on the phone off we hold down the green. Handset + volume up + on)
3.We do wipe-partition menu>format boot>format system>format data>format cache
4.Install zip from sd card>choose zip from sdcard>Choose the archive with the firmware>phone flashing>reboot system now.
Installation via Fastboot
1. With the smartphone turned off, press simultaneously the key combination “hang up” + “volume down” + “power button” and hold for a few seconds.
2.Connect the smartphone to the computer via USB-cable.
3. From a previously unpacked archive with firmware, launch the file with bat permission
4. After the firmware, we take out the battery for 5 seconds.
miscellanea
FAQ on removing applications from the firmware
How to loop a ringtone or how to make a recurring call
How to make a wipe battery
To do this, you need to go to the custom recovery --- advanced --- Wipe Battery Stats (at the same time it is better to charge the battery up to 100, after the wipe again connect to the charge)
How to set up the End button
We go into the application Spare Parts, we see the point "Behavior of the End Button" well, and then ourselves)
Modes / CPU Profiles
SAVAGEDZEN - This cpu mode is based on SmartAss mode. It differs from the original changed settings and some modifications.

PERFORMANCE - when using this mode, the frequency of the CPU is set to the maximum. It is not recommended to use on the phone, as it greatly affects the power consumption - of course, for the worse.

SMOOTHASS - Another mode based on SmartAss. Differs slightly improved speed.

SMARTASS - mode of operation specially optimized for use on mobile phones. The main difference from other modes is that the CPU operates at different frequencies in sleep mode and in the normal mode. In sleep mode, the frequency is limited to 384mhz, and in normal mode to 998 (or the one you set). Disadvantages - low productivity. Also, when the phone goes to sleep, to turn on the screen, you need to hold down the power button for 2 seconds so that the phone wakes up. This mode is highly energy efficient.

POWERSAVE - this mode is the complete opposite of the PERFORMANCE mode. With this mode, the frequency of the CPU is set to the minimum frequency.

INTERACTIVEX - mode based on INTERACTIVE - different settings have been changed.

INTERACTIVE - This mode allows you to dynamically change the frequency depending on the load. It features minimal delays for changing frequency.

SMARTASS2 - A new improved version of SmartAss.

MINMAX - this mode tries to minimize the change in the frequency of the CPU For this, he uses only two frequencies, the minimum and maximum.

SUPERBAD - redesigned SmartAss mode. Differs more responsiveness from the original.

SCARY - this mode is based on Conservative. Attempts to maximize the low frequencies of the CPU. It differs from the original by tweaks transferred from SmartAss, namely using different maximum frequencies in sleep and active mode.

Virtuous - mode based on Smartass2

Lagfree - This mode is based on Ondemand. The main difference is that he tries to gradually change the frequency depending on the load.

OndemandX - based on the original Ondemand. But it has higher performance and responsiveness.

Ondemand - standard CPU operation mode. Gradually changes the frequency of the CPU, depending on the load. It allows you to save energy and at the same time practically does not affect the performance of the phone.

Battery: 1st place -Smartass2 | 2nd place - InteractiveX | 3rd place - SavagedZen Performance: 1st place - Minmax | 2nd place - Smartass2 | 3rd place - SavagedZen
Cyanogen mod 7 themes [HDPI-MDPI]
Online kitchen to create those
Android Tweaks
Instructions for replacing splash logo
Transparent statute bar, Clock in the middle, operator name and different types of window transition animations are displayed-For CM 7.2.0 UPDATE by $ aNek011
Setting the center joystick


Post has been editedJoysko - 21.10.18, 02:50
Reason for editing: Optimization of caps in accordance with the rules of the forum for the design of headings



Rep: (3)
Huglik,
about the firmware Zer_Man, _Update2.5_CyanogenMod + 7.2.0 + - + Repack + by + bervicki + & + Huglik



Rep: (66)
And we are about CyanogenMod 7.2.0 Official U8150 -. U8500 Edition))) And then what you say - it's style
Ios7, and it is specially made so



Rep: (11)
We_Love_Dubstep @ 23.09.2013, 16:40*
jaguar86
I hear you, but not simpler Spare Parts simply click on the button "End button behavior"? : D
And assign the action "Home" on the joystick simply bezsmyslenno) IMHO, of course.

Everyone decides for himself that it is easier and more convenient!
I think this is not bezsmyslenno and convenient. joystick central key action does not lose, change is only effective when pressing this button, which I do not use because to choose something poke on the touch screen instead of the center button.
In addition, in many smarts HOME button is just a central button.

Post has been editedjaguar86 - 24.09.13, 08:21



Rep: (0)
And there are versions for android 2.3? And how to make your style lock system?



Rep: (23)
Huglik @ 23.09.2013, 21:07*
I think not start ... everything as you describe, not only 0606060606 and ideos should be. It can archive damaged when downloading?

Xs ... Now I try again to download and deliver. It can get.
thehuru,
In the absence of Ascend G330D in the cabin, will likely take Ascend Y300D :)



Rep: (23)
Huglik,
established, in short. Flight rules. Cyan as cyanogen. I look at energy savings today and tomorrow.



Rep: (14)
[Quote name = 'jaguar86' date = '23 .9.2013, 15:33 'post =' 25266613 ']
Put [b] CyanogenMod 7.2.0 Official U8150 - U8500 Edition
It is that Huglik lecturing above?



Rep: (0)
godzilla9999 @ 24.09.2013, 20:57*
It is that Huglik lecturing above?

yes: yes2:



Rep: (0)
Greetings, and how to remove the "hold" when they call? And zadolbalo.



Rep: (23)
We_Love_Dubstep @ 24.09.2013, 21:01*
It became shorter. Flight rules. Cyan as cyanogen. I look at energy savings today and tomorrow.

Well after a few hours surfing the ... I'm just amazed! It really works much faster than anything I've seen. half a second setting opening, and not on others have to wait for 3-5. Free RAM stably held on 65-80Mb. I am amazed. Really cool cyan. While watching the energy saving.



Rep: (66)
Energy savings at the level) for 2 days I go without recharging, but earlier in the evening is always stable on charge



Rep: (11)
Noted problems with the camera firmwareCyanogenMod 7.2.0 Official U8150 - U8500 Edition .
Photo snimaetnormalno, and as soon as the turn in the video recording mode, a black screen appears and Camera.apk process is not responding.

Who is this firmware can check the operation of the camera in the video recording mode? Has anyone else encountered this problem?

I think the problem can be solved by replacing Camera.apk file from another firmware. One thread can share the data file?

Post has been editedjaguar86 - 25.09.13, 17:35



Rep: (66)
Tried to change the camera - the bug was. May the best side to try?



Rep: (23)
Huglik @ 25.09.2013, 18:19*
Energy savings at the level) for 2 days I go without recharging, but earlier in the evening is always stable on charge

Well, for how long I on the Internet all day, the discharge is very fast. And so, I think he would have stayed stable for 2-3 days in dialer mode.



Rep: (6)
We_Love_Dubstep @ 24.09.2013, 18:45*
Ascend Y300D



ahah: D well, not human, like the rules



Rep: (11)
Tried to change the camera - the bug was. May the best side to try?

probyval putLG Camera everything works fine (and photo and video).

However, the question remains how to make work applications (eg, VideoReg), which work with a standard camera (Camera.apk)?
VideoReg black screen appears and VideoReg process is not responding at startup.



Rep: (23)
Dudes. Need help. Who will someone tell me how to make a pure cyan transparent status bar? PlYz: D



Rep: (1040)
Huglik @ 25.09.2013, 19:54*
Tried to change the camera - the bug was. May the best side to try?

Camera.smali me into framework.jar



Rep: (11)
$ ANek011 @ 29.09.2013, 01:33*
Camera.smali me into framework.jar


I do not understand how it can be changed.
Zaguglit and found post $aNek011 in another forum thread for Huawei U8150 Ideos I had the exact same problem ( here ).

$ aNek011 made a fix for the camera ( here ), Which is set through rekaveri.

$ aNek011 you can do the same for our firmware (CyanogenMod 7.2.0 Official U8150 - U8500 Edition)?
or who will understand how to do it, put please fix that can be installed through rekaveri.

P.S. the need to make files.

Attached files

Attached fileframework.jar(2.97 MB)
Attached fileframework-res.apk(3.9 MB)


Post has been editedjaguar86 - 30.09.13, 08:51



Rep: (1040)
Fix Camera for firmware CyanogenMod 7.2.0 U8150 - U8500 Edition
Download


Post has been edited$ aNek011 - 30.09.13, 14:37


Full version    

Help     rules

Time is now: 30/03/20, 16:16