Huawei U8500 - CyanogenMod



Rep: (1040)
Huawei U8500 - CyanogenMod
Attached ImageHuawei U8500, MTS Evo, Beeline E300
Description Huawei U8500 | Description MTS Evo | Description Beeline E300 | Discussion » | Embellishments » | Firmware » | MIUI » | Club HUAWEI » | Club Huawei U8500 » | Tips to improve power saving devices on Android OS | Android OS FAQ | Android - Glossary

Important information!
  • This topic was created exclusively for discussions of all versions of CyanogenMod firmware.
    For more information on the CyanogenMod project follow the link tosite of this project.
  • Currently, none of the CyanogenMod assemblies for Huawei u8500 is stable. Therefore, all the firmware discussed in this topic is not recommended for installation for beginners. You do everything at your own peril and risk.
  • On some firmwares there is overclocking! It is not recommended to set overclocking to more than 710Mhz! The processor may burn!
  • CyanogenMod need to be installed on top of android 2.2!
  • None of the assemblies does not work and the radio will not work!
  • The most stable firmware CyanogenMod:CyanogenMod 7.2.0 by $ aNek011 Update 11
  • If you want your development / mod / firmware to be in the header, write to me in the LAN about it, indicating the name of your development / mod / firmware and a link in which there is a full description!
Drivers and Utilities
Android SDK Tools
Easy tools from Graevka - A program to help beginners to install drivers, clean up sections of the phone, firmware ClockworkMod, creating an Ext section with detailed step-by-step instructions.
Firmware
The fastest firmware speeds
Test build Android 4.0 Ice Cream Sandwich
CyanogenMod7 by $ aNek011
CyanogenMod 7 by Real .....
CyanogenMod 7 by AnsonKlavs
CyanogenMod7 by Slax
CyanogenMod7 by Slax SP10
Mini instruction to CyanogenMod7 by Slax SP10
1. Before the firmware, it is desirable to make wipes.
2. Firmware is installed via fastboot by clicking on "windows 2.3.bat"
3. Google applications are put through recovery (the Gapps_CM7 archive by Slax SP10.zip must be written to the memory card in advance)
4. To solve problems with GTalk, you need to erase the Google Services Framework application data (settings - applications - application management - all - Google Services Framework - click to erase data)
5. After the firmware, it is not recommended to do wipes - some of the screen locks disappear (including a graphic key)
6. can also be putpatchwhich should fix problems with the volume of the call. But I rolled back the patch. after installing it, periodically instead of ringing, a wheeze was heard And someone helped. If there are no problems with the volume - do not put.
Josy
Original firmware + Russifierfromwebscom ( clicking on links causes autoload! )
MOKEEOS
Joy os
Remaining firmware
If the firmware does not have pre-installed Google-services (market, maps, etc.), then download and installGoogle-Apps (Install via CWM Recovery)
ClockWorkMod Recovery
Installation Instructions ClockWorkMod Recovery via Fastboot
1. With the smartphone turned off, press simultaneously the key combination “hang up” + “volume down” + “power button” and hold for a few seconds.
2.Connect the smartphone to the computer via USB-cable.
3. From a previously unpacked archive with firmware, launch the file with bat permission
4. After the firmware, we take out the battery for 5 seconds.
Installation Instructions ClockWorkMod Recovery without a computer
Instructions on how to do backup (Backup), Wipe (Wipe) and Recovery firmware (Restore) via ClockWorkMod Recovery 5.0.2.0
ClockWorkMod Recovery 5.0.2.0
ClockWorkMod Recovery 5.0.2.8 by $ aNek011-Fastboot version
ClockWorkMod Recovery 5.0.2.8 by $ aNek011-Recovery version
CWM-Recovery 5.5.0.4 by $ aNek011 for Recovery
CWM-Recovery 5.5.0.4 by $ aNek011 for FastBoot
Firmware installation instructions
Installation via CWM recovery
1. We start the archive with the firmware on the sd card.
2. Go to clockworkmod recovery (on the phone off we hold down the green. Handset + volume up + on)
3.We do wipe-partition menu>format boot>format system>format data>format cache
4.Install zip from sd card>choose zip from sdcard>Choose the archive with the firmware>phone flashing>reboot system now.
Installation via Fastboot
1. With the smartphone turned off, press simultaneously the key combination “hang up” + “volume down” + “power button” and hold for a few seconds.
2.Connect the smartphone to the computer via USB-cable.
3. From a previously unpacked archive with firmware, launch the file with bat permission
4. After the firmware, we take out the battery for 5 seconds.
miscellanea
FAQ on removing applications from the firmware
How to loop a ringtone or how to make a recurring call
How to make a wipe battery
To do this, you need to go to the custom recovery --- advanced --- Wipe Battery Stats (at the same time it is better to charge the battery up to 100, after the wipe again connect to the charge)
How to set up the End button
We go into the application Spare Parts, we see the point "Behavior of the End Button" well, and then ourselves)
Modes / CPU Profiles
SAVAGEDZEN - This cpu mode is based on SmartAss mode. It differs from the original changed settings and some modifications.

PERFORMANCE - when using this mode, the frequency of the CPU is set to the maximum. It is not recommended to use on the phone, as it greatly affects the power consumption - of course, for the worse.

SMOOTHASS - Another mode based on SmartAss. Differs slightly improved speed.

SMARTASS - mode of operation specially optimized for use on mobile phones. The main difference from other modes is that the CPU operates at different frequencies in sleep mode and in the normal mode. In sleep mode, the frequency is limited to 384mhz, and in normal mode to 998 (or the one you set). Disadvantages - low productivity. Also, when the phone goes to sleep, to turn on the screen, you need to hold down the power button for 2 seconds so that the phone wakes up. This mode is highly energy efficient.

POWERSAVE - this mode is the complete opposite of the PERFORMANCE mode. With this mode, the frequency of the CPU is set to the minimum frequency.

INTERACTIVEX - mode based on INTERACTIVE - different settings have been changed.

INTERACTIVE - This mode allows you to dynamically change the frequency depending on the load. It features minimal delays for changing frequency.

SMARTASS2 - A new improved version of SmartAss.

MINMAX - this mode tries to minimize the change in the frequency of the CPU For this, he uses only two frequencies, the minimum and maximum.

SUPERBAD - redesigned SmartAss mode. Differs more responsiveness from the original.

SCARY - this mode is based on Conservative. Attempts to maximize the low frequencies of the CPU. It differs from the original by tweaks transferred from SmartAss, namely using different maximum frequencies in sleep and active mode.

Virtuous - mode based on Smartass2

Lagfree - This mode is based on Ondemand. The main difference is that he tries to gradually change the frequency depending on the load.

OndemandX - based on the original Ondemand. But it has higher performance and responsiveness.

Ondemand - standard CPU operation mode. Gradually changes the frequency of the CPU, depending on the load. It allows you to save energy and at the same time practically does not affect the performance of the phone.

Battery: 1st place -Smartass2 | 2nd place - InteractiveX | 3rd place - SavagedZen Performance: 1st place - Minmax | 2nd place - Smartass2 | 3rd place - SavagedZen
Cyanogen mod 7 themes [HDPI-MDPI]
Online kitchen to create those
Android Tweaks
Instructions for replacing splash logo
Transparent statute bar, Clock in the middle, operator name and different types of window transition animations are displayed-For CM 7.2.0 UPDATE by $ aNek011
Setting the center joystick


Post has been editedJoysko - 21.10.18, 02:50
Reason for editing: Optimization of caps in accordance with the rules of the forum for the design of headings



Rep: (15)
Sanya me to those that question! if the surrounding Android 4.0, the phone wakes strongly fail?

Post has been editedAnton9696 - 06.03.12, 14:39



Rep: (1040)
Anton9696 @ 06.03.2012, 15:33*
Sanya me to those that question! if the surrounding Android 4.0, the phone wakes strongly fail?

in the cap all written!
Firmware is very glyuchennye-not for everyday use!



Rep: (1)
What the Chinese have heard?

here

K
And most can not see?


Post has been edited$ aNek011 - 06.03.12, 15:26



Rep: (59)
Box777, firewood in this thread downloadsavagemessiahzine.com/forum/index.php?showtopic=198384, rekaveri also find there (I advise you to install a second version) to install the driver, raskokovyvaesh archive with rekaveri off 1. On your smartphone, press
while the key combination
"All clear" + "volume down" + "button
inclusion "and to take a few
seconds
2.Podsoedenit smartphone to your computer
via USB-cable.
3.Iz previously unpacked the archive with
rekaveri run file
bat resolution. Well that is not clear?



Rep: (1040)
Box777 @ 06.03.2012, 22:45*
download any firewood? Give links to everything you need for firmware. I have XP

here is a man: wacko:
Those given RECALLING
The guy on the website @ 06.03.2012, 22:39*
savagemessiahzine.com/forum/index.php?showtopic=198384


Right in front of the driver and utility!

Post has been edited$ aNek011 - 06.03.12, 21:53



Rep: (0)
guys, this question: I am now the last RC (CyanogenMod 7.2-Android 2.3.7-by $ aNek011-Release Candidate 1), and from Market applications do not put. I tried to load in the browser, but Google says it is not supported. even I tried to install * .apk of the card, but also Feil. I wanted to put wolframalfa, transpot, kinopoisk, endomondo. ran a bit earlier on a similar problem, there is advised to create in the / system through rutkommander faylets noinswap, so inform the system is mounted for write-only. one more such problems were, how to solve?

Post has been editedpedobear - 07.03.12, 01:05



Rep: (24)
pedobear,
yesterday just put transpot.heredecision.
however, in the set guglkarty old version 4. placed on top of the 6.3.



Rep: (24)
pedobear,
I have before that I've found 2 raspihal folders (on the last pages written as), but they had no effect. but when put gappsy, transpot saw in the store, and deliver. Perhaps, markets need time to Prochukhan :)



Rep: (26)
I put com.google.android.maps. from the previous page and everything works



Rep: (0)
guys who are sitting on a proshe?



Rep: (3)
Andruculla 4-1 ... better not yet invented

Download

Post has been editedvsevlad - 07.03.12, 20:29



Rep: (2)
CyanogenMod 7.2-Android 2.3.7-by $ aNek011-Release Candidate 1 are satisfied, and especially the battery per night 0% (from 22 to 8.00):! D



Rep: (0)
vubornov @ 07.03.2012, 21:13*
Andruculla 4-1 ... better not yet invented

Sanya although that is doing .....



Rep: (15)
Why can not I install the Flash Player to see through the market? He writes that the application is not supported on your device.



Rep: (154)
Anton9696 @ 8.3.2012, 2:20*
Why can not I install the Flash Player to see through the market? He writes that the application is not supported on your device.

because that "application is not supported on your device." well, flash does not work in our phone has everywhere discussed.



Rep: (2288)
a question? as Slax sp10 tie dsp manager.



Rep: (59)
kosmos2011 @ 08.03.2012, 11:27*
rikrutit dsp manager.
Now set this also increases the soundVolume + (Post # 7481514)



Rep: (1040)
ClockWorkMod Recovery 5.0.2.8 by $ aNek011 (Compiled from source)

Just my changes:
Now available to mount and format the partition Cust
In the separation of the stick on the ext partition by default divided into ext4
Established LDPI resolution, looks better and accurately than MDPI rekaveri

Also in this version is fully working rekaveri mount the SD card to a computer

Download

Post has been edited$ aNek011 - 08.03.12, 15:27



Rep: (2)
My question is, when you exit the application, they (the application) remain in memory, whether it is in the power consumption affects? Or need to unload?



Rep: (107)
palych124 @ 08.03.2012, 18:25*
when you exit the application, they (the application) remain in memory, whether it affects the energy consumption? or need to unload?

We read the cap,Android OS FAQAT)


Full version    

Help     rules

Time is now: 27/02/20, 17:21