Assistant
REPLY |
Configuring access to files on the local network | From the communicator to the PC and from the PC to the communicator. |
Message#1 04.08.11, 23:45 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2296 Check in: 27.02.08 Motorola QUENCH XT5 Reputation: 613 | Copying files from a computer or laptop (hereinafter referred to as PC) to a mobile device (hereinafter Android) and back is often required and (in the case of large files) it is easiest to do this using Wi-Fi. Basic requirement: All devices (one or more PCs, Androids) must be connected to the same network!
General recommendations
An example of setting up file transfer between two Androids . Rebranding caps courtesy ofFidelich - tyts . Post has been editedGridzilla - 22.02.16, 11:53 Reason for editing: edit |
Message#2 07.08.11, 18:53 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4896 Check in: 10.09.10 Samsung Galaxy Note 3 SM-N900 Reputation: 836 | Stopped at stage 2. I don’t understand what login and password to enter ES Explorer to access shared files and folders on a laptop with Windows 7. I think I’ve found the password for the wireless connection (but I’m not sure if it is), but I can’t find the login. Tell me where to put this username and password in Windows 7? |
Message#3 08.08.11, 07:03 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2296 Check in: 27.02.08 Motorola QUENCH XT5 Reputation: 613 | skunsofob, Windows username and password. Those. You can either enter the name and password of the user under which you enter in Windows, or create a separate one, call it, for example, Android. Perhaps the problem is also that the Windows user has no password. I don’t know about Win 7, but Win XP Pro denies access to shared folders to users without a password. Another option is to try to set the checkbox "Anonymous Login" in the server settings. -------------------- Motorola Quench XT5>Lenovo A630>Motorola Quench XT5>Lenovo A850>Xiaomi Redmi 4X>MTS SURF 2 4G |
Message#4 08.08.11, 08:17 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4896 Check in: 10.09.10 Samsung Galaxy Note 3 SM-N900 Reputation: 836 | Galka Anoniyinny entrance set - does not help. And I really do not have passwords on PCs with XP, or on a laptop with Win7. Is it really necessary to create a separate user under the password? On the wire network did - no passwords were required. Post has been editedBodtek - 11.10.11, 11:11 Reason for editing: + from frezerovschik |
Message#5 08.08.11, 08:36 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2296 Check in: 27.02.08 Motorola QUENCH XT5 Reputation: 613 | Those. Access from PC to laptop with Win 7 is without a password? Win 7 username and empty password in ES Explorer settings do not work? Check Win7 settings in the Control Panel ->Networks and the Internet ->Network and Sharing Center ->Change advanced sharing options (Control Panel ->All Control Panel Items ->Network and Sharing Center->Change advanced sharing settings), there are additional parameters at the very bottom and specify "Disable password protection". After that, an anonymous login from Android should earn. As an option - try to temporarily disable the firewall in Win 7. Perhaps it interferes. Post has been editedraven6 - 09.08.11, 20:42 -------------------- Motorola Quench XT5>Lenovo A630>Motorola Quench XT5>Lenovo A850>Xiaomi Redmi 4X>MTS SURF 2 4G |
Message#6 16.08.11, 22:34 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 76 Check in: 17.12.10 Samsung Galaxy Ace GT-S5830 Reputation: 16 | Something does not work I click "scan" my PC is at the same time that no folder is shared, when I try to connect to it, it writes the wrong login and password - I don’t understand what login, what password ... |
Message#7 17.08.11, 07:17 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2296 Check in: 27.02.08 Motorola QUENCH XT5 Reputation: 613 | writes the wrong username and password - I do not understand what kind of username, what kind of password ... The login and password of a Windows user who has access to shared folders. So share some. Without shared folders on a PC, this whole idea loses its meaning. True, there are administrative resources in Win XP - all partitions on the hard disk are automatically shared with names like C $, D $, etc. To access such resources, you must specify the name and password of the user of this PC with administrator rights. Post has been editedraven6 - 17.08.11, 09:39 -------------------- Motorola Quench XT5>Lenovo A630>Motorola Quench XT5>Lenovo A850>Xiaomi Redmi 4X>MTS SURF 2 4G |
Message#8 17.08.11, 10:20 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 76 Check in: 17.12.10 Samsung Galaxy Ace GT-S5830 Reputation: 16 | So I do not use any login and password for the account (Windows 7) Yes, I tried (I created a folder and shared access to it), it does not work anyway, the firewall turned off |
Message#9 17.08.11, 10:26 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2296 Check in: 27.02.08 Motorola QUENCH XT5 Reputation: 613 | [email protected], 14:20 So I do not use any login and password for the account (Windows 7) At least one user was created during OS installation. Look in the control panel>Accounts or type in the Start menu search box control userpasswords2 After that, a list of all existing user accounts will be displayed. Temporarily (well, or permanently, although it is not safe), disable the password protection of shared folders. Check Win7 settings in the Control Panel ->Networks and the Internet ->Network and Sharing Center ->Change advanced sharing options (Control Panel ->All Control Panel Items ->Network and Sharing Center->Change advanced sharing settings), there are additional parameters at the very bottom and specify "Disable password protection". After that, an anonymous login from Android should earn. Post has been editedraven6 - 17.08.11, 10:32 Reason for editing: Added control userpasswords2 -------------------- Motorola Quench XT5>Lenovo A630>Motorola Quench XT5>Lenovo A850>Xiaomi Redmi 4X>MTS SURF 2 4G |
Message#10 17.08.11, 10:52 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 76 Check in: 17.12.10 Samsung Galaxy Ace GT-S5830 Reputation: 16 | There is an account, but no password is used in it (if you don’t use what to enter?), Why is it being asked I don’t understand The password protection has been turned off, when connected to a computer, the folders are opened for public access, but when I try to access any of the folders I share, a message appears about the wrong login and password |
Message#11 17.08.11, 11:00 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2296 Check in: 27.02.08 Motorola QUENCH XT5 Reputation: 613 | when I try to log into any of the folders I share, I get a message about the wrong login and password. Anonymous login in the server settings in ES Explorer, try to enable. Post has been editedraven6 - 17.08.11, 11:14 -------------------- Motorola Quench XT5>Lenovo A630>Motorola Quench XT5>Lenovo A850>Xiaomi Redmi 4X>MTS SURF 2 4G |
Message#12 17.08.11, 11:04 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 76 Check in: 17.12.10 Samsung Galaxy Ace GT-S5830 Reputation: 16 | Anonymous login is enabled, it still does not allow. Writes: incorrect password, possible reasons: insufficient user rights Maybe there is an alternative solution with a much simpler setup?) Post has been editedDeaDia - 17.08.11, 11:06 |
Message#13 17.08.11, 11:16 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2296 Check in: 27.02.08 Motorola QUENCH XT5 Reputation: 613 | Try other network-enabled file managers. If it does not work, then enable password protection for shared folders and create a user (for example Android) with a password. Post has been editedraven6 - 17.08.11, 11:17 -------------------- Motorola Quench XT5>Lenovo A630>Motorola Quench XT5>Lenovo A850>Xiaomi Redmi 4X>MTS SURF 2 4G |
Message#14 18.08.11, 22:40 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2296 Check in: 27.02.08 Motorola QUENCH XT5 Reputation: 613 | Anonymous login is enabled, it still does not allow. Writes: incorrect password, possible reasons: insufficient user rights Understood. So, the disposition: Win 7, static IP, the only user created during installation, which has no password. If Win 7 has password sharing enabled (by default), then ES Explorer will not even be able to view the list of shared folders, it will be immediately sent because it has no documents. If sharing with password protection is disabled, the list of shared folders in ES Explorer is displayed, but access can only be obtained to the Users folder, since access to it is enabled by default for everyone. There are two options: either disable password protection and grant access rights to each shared folder to the guest / Guest user (folder properties>Access, select Guest in the list and click add), or not disable password protection, but create a user with a password, and again grant him the right to access the shared folder in the same dialog. After that, the name and password of this user must be entered in the server settings in ES Explorer. By default, Win 7 gives access to the shared folder only to our only user, who does not have a password, so he cannot log in via the network. If you do not want to choose a user at each boot, then configureautomatic login. Post has been editedraven6 - 18.08.11, 22:40 -------------------- Motorola Quench XT5>Lenovo A630>Motorola Quench XT5>Lenovo A850>Xiaomi Redmi 4X>MTS SURF 2 4G |
Message#15 19.08.11, 04:49 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4896 Check in: 10.09.10 Samsung Galaxy Note 3 SM-N900 Reputation: 836 | It turned out to get access to some folders on your computer from the phone. Only under the user "Guest" (other names do not want to be perceived). And to make the general access to the whole C: \ drive fail. Only if you do for each folder separately. Maybe you can somehow allow access to the entire contents of the computer in a simpler way? Also, by the link above, I made an automatic login, but when I wake up again, I need to select a user by clicking on the icon. And with normal boot - automatic login works. How can Windows 7 "explain" that I am the ONLY ONE computer user that others are not and are not expected? So that there are no other users, except "Owner (Administrator)". Delete all other accounts so as not to get in the way and everything is superfluous once and for all. Post has been editedskunsofob - 19.08.11, 18:52 |
Message#16 19.08.11, 05:23 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2296 Check in: 27.02.08 Motorola QUENCH XT5 Reputation: 613 | but when you wake up again, you need to select the user by clicking on the icon. And with normal boot - automatic login works. How can Windows 7 "explain" that I am the ONLY ONE computer user, that there are no others and not Something like this.. -------------------- Motorola Quench XT5>Lenovo A630>Motorola Quench XT5>Lenovo A850>Xiaomi Redmi 4X>MTS SURF 2 4G |
Message#17 19.08.11, 18:51 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4896 Check in: 10.09.10 Samsung Galaxy Note 3 SM-N900 Reputation: 836 | The computer sees the phone but cannot access it (step 3, method 1). В® Samba Server for Android (Post # 8687108) Post has been editedskunsofob - 19.08.11, 18:53 |
Message#18 19.08.11, 22:37 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2296 Check in: 27.02.08 Motorola QUENCH XT5 Reputation: 613 | The computer sees the phone but cannot access it (step 3, method 1). Is it also impossible to log in via IP? Those. open My Computer and write in the address bar \\192.168.0.3 Where 192.168.0.3 is the IP address of the communicator. It is written in the main window of Samba Server. Make sure that the same workgroup is configured for the PC and the communicator. On PC Start>Control Panel>System>Additional system parameters there tab "Computer Name", and in it the item "Working Group". The name of the workgroup on the PC and in the Samba Server settings must match. By default, Samba Server has WORKGROUP, PCs have either WORKGROUP or MSHOME. If the working group does not match, reconfigure on the communicator. -------------------- Motorola Quench XT5>Lenovo A630>Motorola Quench XT5>Lenovo A850>Xiaomi Redmi 4X>MTS SURF 2 4G |
Message#19 20.08.11, 06:08 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4896 Check in: 10.09.10 Samsung Galaxy Note 3 SM-N900 Reputation: 836 | Is it also impossible to log in via IP? Those. open My Computer and write in the address bar \\192.168.0.3 Where 192.168.0.3 is the IP address of the communicator. It is written in the main window of Samba Server. Make sure that the same workgroup is configured for the PC and the communicator. On PC Start>Control Panel>System>Additional system parameters there tab "Computer Name", and in it the item "Working Group". The name of the workgroup on the PC and in the Samba Server settings must match. By default, Samba Server has WORKGROUP, PCs have either WORKGROUP or MSHOME. If the working group does not match, reconfigure on the communicator. A single working group - work groups. The fact of the matter is that even on ip does not enter. I attached the picture. Through the network environment, the phone is visible, but it also does not enter. I have a router, can it matter? Although there I checked everything, everything seems to be spelled correctly. The device names are the same. Another question: why, if you write a computer user in ES Explorer, it cannot connect. Because the user is already connected, because the computer is working? Or not in this case and must be connected. Flock only user "Owner". I already tried to rename everything on my computer and in the explorer, wrote different names - it does not connect. Only as "Guest", although there is no such user in the system. Post has been editedskunsofob - 20.08.11, 06:18 |
Message#20 20.08.11, 06:42 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 2296 Check in: 27.02.08 Motorola QUENCH XT5 Reputation: 613 | The fact of the matter is that even on ip does not enter. I attached the picture. And why in the picture chrome? Write \\ 192.168.0.3 or \\ Desire is needed in the address bar of the explorer. If in ES Explorer, write a computer user, it can not connect. Or not in this case and must be connected. Not in this, should be connected. Rather, the matter is that the owner has no password. And the guest is an unauthorized user, anonymous login works with him. Well, if the automatic login is working, create an Android user with a password, turn on password-protected sharing in the settings and try to open the shared folder. Post has been editedraven6 - 20.08.11, 06:51 -------------------- Motorola Quench XT5>Lenovo A630>Motorola Quench XT5>Lenovo A850>Xiaomi Redmi 4X>MTS SURF 2 4G |
Message#21 20.08.11, 07:05 | |
Guru [offline] Group: Friendssavagemessiahzine.com Messages 4896 Check in: 10.09.10 Samsung Galaxy Note 3 SM-N900 Reputation: 836 | And why in the picture chrome? Write \\ 192.168.0.3 or \\ Desire is needed in the address bar of the explorer. And really, I tried - I requested to enter a user and password. Entered and opened the phone card. Thank you for the clarification! Well, if the automatic login is working, create an Android user with a password, turn on password-protected sharing in the settings and try to open the shared folder. I'll try as you said. Then accomplish your goal. |
mobile version | Now: 03/05/19, 07:42 |