[X]Assistant

[piramida13]

FirmwareHTC Flyer (OS 2.3)
HTC Flyer, P510e
Description | Discussion пїЅ | FAQ пїЅ | Purchase пїЅ | Accessories пїЅ | Firmware 2.3 пїЅ | Firmware 3.2 пїЅ |Firmware 4.xx пїЅ

Basic definitions

What is S-Off

On the devices of HTC installed protection called secuflag. We cannot directly change / copy system files directly from the phone, nor can we flash zip files through fastboot and recovery, since the protection only allows you to flash files signed by HTC. S-OFF turns off all checks in the bootloader. At the same time, we have the opportunity to change system files, delete unnecessary programs from the firmware directly from the phone, resize system partitions, download pictures, etc.

What is ROOT and what is it for?

If you are the owner of a device with the Android operating system, then you probably already heard about such a procedure as rooting (from the English. Root) - gaining complete control over the software and operating system of the device.
There are pros and cons of your device rooting. This article will try to help you with the answer to the question whether you should get full control over your Android device or not.

Arguments Against Routing

You cancel the warranty on the device
If your device is under warranty service and it starts to overheat, or reboot frequently, or any other malfunction is detected, you can return your device for warranty repair or replace it.
However, if you rooted your phone (or, for example, if you installed a different version of the Android operating system on your device, as most of those who ruin your device do), you will void your warranty and the device manufacturer will give you a repair failure. if your device needs it.
Yes, of course, you will be able to remove all traces of the rutting so that no one can find out whether you carried out this operation or not.
You can turn your device into a brick
If you do not exactly follow the instructions of the rutting, then you can turn your device into a brick - make it completely unusable, so that the device can become nothing more than an expensive, shiny "brick" for you.
Routing is not a complicated procedure and can be done in a couple of minutes in a couple of clicks. As long as you are careful with this procedure, you do not have to worry for anything. But the potential risk, if you do something wrong, is huge.
You will lose OTA updates for your device.
From time to time, your device receives updates for its version of Android: there may be minor bug fixes, or large updates, such as upgrading the operating system version from Eclair (Android 2.1) to Froyo (Android 2.2).
If you root your device and then try to install any OTA updates, you will lose root access to your device and will not be able to repeat the root operation again until someone finds a way to get root access for the new updated version of the device.

Arguments for rooting

You will have the possibility of a more complete and advanced device configuration
Routing allows you to install a third-party ROM - a different version of the Android operating system on your device. For example, it is possible to install the HTC Sense user interface on a Nexus One phone.
Some developers offer their own ROM versions, such as CyanogenMod. Other developers offer their own themes for ROM, which can completely change the look of your Android operating system, how the system works and change other functions. The basic functions allow you to sufficiently change the operating system for your needs, however, the routing of your device will raise your configuration options to a higher level.
You can increase the performance or life of the battery of your device.
Various modifications of the Android operating system have their advantages. For example, CyanogenMod focuses on improving performance, which optimizes your device for as fast and smooth operation as possible. Oxygen, on the other hand, helps you save the life of your battery.
Having received root access to your device, you can independently configure, for example, the frequency of the processor operation of your device with the help of applications such as, for example, SetCPU. It will adjust the frequency of the processor under certain operating conditions, for example, when the discharge of the battery becomes low, or reduce the energy consumption of your device at night when it is not in use.
You will have more opportunities.
You can transfer absolutely any applications to the SD card including their cache, while leaving more space on the phone’s internal memory. Also, you can install and work with applications that can take screenshots directly from the current screen of your phone (usually this requires connecting the phone to a computer and using debugging programs)
You can put a firewall on your Android device.
When you go online, your phone starts checking for updates, downloading information for applications, updating the weather and using a large amount of Internet traffic. To prevent this, you can put the Firewall on your phone, for example, Droidwall, which will restrict programs from accessing the Internet, which is very useful if you have, for example, high prices for Internet traffic over 3G.

The choice is yours

Drivers and Utilities

• Android SDK Tools
  

Official firmware

installation method: run exe on a computer with Windows, then follow the instructions of the bootloader (on the computer) the device should be connected to the computer in working mode
firmware 2.23.405.3 on the people
2.23.405.3 inPG41IMG.zip format on the peoplefor installation via bootloader
2.27.111.1 inPG41IMG.zip format on the peoplefor installation via bootloader
official firmware for our deviceandhere
Firmware list
Update from 17 06 11

Unofficial firmware

version 1.0.0 download version 2.2.0 download Presenting LeeDrOiD for the HTC Flyer
firmware based on 2.23.405.3
FLYHIGHROM version 1.2
2.26 for installation through recovery. there is a root
link FlyHigh ROM v1.1 | extra speed | GSM / WiFi script | % battery mod 2.3.4
firmware based on canadian 2.26.1530.3
firmware based on 1.36.405.5 games from GameLoft work
link i00 ROM - The first custom Flyer ROM! v1.1 based on 2.26.1530.3
link[/ color] [Flyer] Stock ROOTED Full Phone Support
custom roms from xda-developers developers

Instructions

firmware order

1 -define the version of HBOOT -for this go to the fastboot mode (after removing the checkmark in the "fast boot" in the settings section =>food) in the second line above we see the information we need.
a) HBOOT-1.10.0000 (not an Asian device) or 1.11.0003 as an Asian one so WWE = =skip step 2 of this manual
B) HBOOT- does not correspond to the above parameters = =carefully read the next item
2 - use the method described in the instructionsfirmware with GOLDCARDAnd if the Asian machine is updated to the versionRUU_Flyer_hTC_Asia_WWE_2.27.707.1_Radio_20.3504.30 .089BU_3809.07.04.06_M_release_204905_signed(careful with traffic)
3-so the necessary version of the bootloader (HBOOT) we have. Getting to the S-OFF instructionThis is a quick guide to get S-OFF on Flyer.
4-if, when receiving S-OFF, the recovery was not loaded, install it as a separate file (archive and usage guide below)
5 - if there is no desire to install custom firmware, we get ROOT (archive and usage guide below)
6-include phone functions (again for those who are against custom)

flashing with GOLDCARD for devices with non-compliant bootloader version

If you already have a goldcard created for another HTC device it is likely that it will work, otherwise go to the section on creating a goldcardcreating a goldcard using an android device

be careful when using the Flyer as a card reader

When searching for CID, goldcardtool can only use mnt0 and mnt1, and the SD card hangs on mnt2.

Process.
1) I took from the FAQ to create a Goldcard program, which is called "PSAS" there. Although after installation they are referred to as "RevSkills".
2) Made according to the instructions:
In the Calculators / Generators menu, select Generate HTC Goldcard.
3) Next, "Get CID using ADB". There in the dropdown box I chose “2.” Get CID. Showed CID to buffer. And close this window.
4) Paste in the field Serialnumber of SD-card (CID). Poke Reverse CID. The value in the field will change (if you poke again, the former will return).
5) Open the Goldcardtool. There's a link in the Gold Card Gen.
Further, all of the standard instructions. The main thing is to be more careful, and do not try to make a gold card on the built-in memory.

firmware using GOLDCard

for Flyer, with the HBOOT version running with the utility for getting S-OFF

Some versions of HBOOT (mainly from Asia) are not supported by the utility for getting S-OFF and must be updated toRUU_Flyer_HTC_WWE_2.00.405.3_R_Radio_20.3501.30.08 9BU_3809.05.04.10_M_release_194964_signed.exewhich you can download for thisreference. It is about 517 MB
or untilRUU_Flyer_HTC_WWE_2.23.405.3_R_Radio_20.3504.30.08 9BU_3809.07.04.06_M_release_204108_signedwhich can be downloaded for thisreferenceweighs a lot too

After downloading, run the installer, when the dialog box about the beginning of the update appears. Press the start menu in the search bar and type% TEMP% and look for the folder corresponding to the time when the installer of this format was launched =>{0E03141E-27B1-4E3A-B9B9-18DA9C1FCBEC} \ {50F2F878-636A-496F-A7CB-544C067E0C4B} in this folder, look for ROM.zip, copy it somewhere.

Rename ROM.ZIP to PG41IMG.zip

Copy the resulting file onto the gold card, insert it and reboot into bootloader mode. (Hold down the volume down button and briefly press the Power button) The firmware should go.

This is a quick guide to get S-OFF on Flyer.
These HBOOT versions are supported by HTC Flyer (flyer) 1.10.0000-official Russian 2.00.405.3 and 1.11.0003-official Russian 2.23.405.3 as well as the official Asian .2.27.707.1 where the loader version is also 1.11.0003

support for Hboot version 1.11.0003 added to revolycionery utility

Step 1 (Windows): Remove HTC Sync and any other syncing apps (Androsync for example) that you used.
Step 2 (Windows): Installationthese fastboot drivers
Step 3 Restart the device if you have a root temp.
Step 4 Turn on fasboot OFF and USB debugging software.
Note: the device must be fully operational, do not go into the bootloader or FastBoot.
Step 5 Connect the device via USB if not done.
Step 6 go to"revolutionary site"and choose to download for your platform (Windows or Linux) do not fill out forms and do not close the page.
Step 7 Run the application (from the downloaded archive) to get the serial number will be something like HTCXXXXXX
Step 8 Go back to the webpage and enter the details required for the form to get your key.
Step 9 Copy and paste the beta key back to the application (to copy, click on the button in the upper left corner and select Changes-Mark, move the cursor using Shift to mark, then Changes-Copy) and press enter-enter.
Step 10 Follow the instructions on the screen.
If you see this message:SUCCESS - Life gave us a lemonade!(translation = SUCCESS - Life gave us lemons, we did not make lemonade!) then S-OFF was successful, even if CWM did not boot. To get CWMrecovery, look for a separate file in the header.

Recovery in a separate file, if not installed when receiving S-OFF

PG41IMG.zip files are installed by standard recovery. In order for the file to be stitched, you need to copy the archive to the memory card, reboot into fastboot mode and the firmware will go into auto mode after the firmware and reboot remove PG41IMG from the cardnecessarilyPG41IMG.zip(4.52 MB)
after installing the recovery, it is possible to install custom firmware (links in the unofficial firmware section)

installation via ADB

To install custom recovery after unlocking via HTCDEV, you need
Unpack the archive from the recovery, from the header
File recovery.img placed in the folder created when you unlock the bootloader
At the command prompt, execute the commandfastboot flash recovery recovery.img

getting ROOT

To get root rights on the device, you need to install su_2.3.6.3_efgh_signed.zip with the help of recoverysu_2.3.6.3_efgh_signed.zip(289.79 KB)

enable phone features

To enable phone functions, you need to change part of the lines in the build.prop file
for this we need any explorer with root support, let's say an ES conductor with root enabled in the settings.
go to the system folder, select the build.prop file to open using the ES editor and change the lines
===================================
first two linesblocking<->includeUSSD
and the last twoblocking<->includeSupport bluetooth headset. And phone
ro.ril.reject.cs.ss.enabled =1 <->0
ro.ril.reject.mo.ussd.enabled =1<->0
ro.bt.profiles = 4270339<=>403
ro.phone.function =0<->1
service.brcm.bt.ag_supported =0<->1
===================================
after the change we save the file and reboot(it is better to make all changes on the file copied to any directory, and then copy it with replacement into the system folder)- experience has shown it easier

using CWM recovery

Instructions for installing ZIP firmware via ClockworkMod recovery

- we dump a zip-firmware on a memory card, without unarchiving it
- a zip firmware card must be inserted in the device
- we go in Recovery on the switched off device, hold down the volume minus key (until the menu appears) and briefly press the start button (Power)
- use the volume change keys to select the recovery item
- press the start key (Power), CWM recovery will boot

пїЅselect wipe data / factory reset (all data in the ext section will disappear if it exists)
(this operation should be done only when changing the firmware when installing patches and updates, this item should be skipped)

- select the install zip from sdcard option ->choose zip from sdcard ->choose * .zip (file with the firmware you need)
- after the end of the firmware, we return to the CWM main menu using the line ++++ GO Back ++++ and select the reboot system now item
- the device will reboot and within 5-10 minutes will load Android
- after the first start, it is recommended to restart the system 1 or several times.

Recowery menu navigation

• volume up button - up
• volume down button - down
• Start button (Power) - select item

value of menu items

• Reboot system - reboot of the communicator
• apply sdcard: update.zip - install the firmware from the update.zip file located in the "/ sdcard /" directory
• wipe data / factory reset - formatting the data (partition in the internal memory with user data) and ext (if it was created on the memory card)
• wipe cache partition - formatting cache partition
• install zip from sdcard - install a zip firmware with a random name from a memory card (from any folder)
в—¦ apply sdcard: update.zip - install the firmware from the update.zip file located in the "/ sdcard /" directory
в—¦ chooze zip from sdcard - select zip (firmware, fix, etc.) on the memory card for installation
в—¦ toggle signature veritification - on / off. verification of firmware signature
в—¦ toggle script assert - on / off. approval script
• backup and restore - backup and restore
в—¦ backup - full backup of the firmware on the memory card
в—¦ restore - restore backup created by the backup item
в—¦ Advanced Restore - recovery mode with advanced settings, selective recovery
• mounts and storage - mount and memory
в—¦ mount / system - mount system folder
в—¦ unmount / data - unmounting data folder
в—¦ unmount / cache unmounting the cache folder
в—¦ mount / sdcard - mount memory card
в—¦ mount / sd-ext - mount ext partition of memory card (ext partition must be created on the memory card)
в—¦ format boot - format the boot partition
в—¦ format system - formatting the system partition (where the Android OS firmware itself is located)
в—¦ format data - formatting data section - user data section
в—¦ format cache - cache partition formatting
в—¦ format sdcard - formatting the memory card (all data from the memory card will be deleted)
в—¦ format sd-ext - formatting an ext partition on a memory card
в—¦ mount USB storage - connect to PC in removable disk mode
• advanced - advanced
в—¦ Reboot Recovery - restart recovery
в—¦ Wipe Dalvik Cache - cleaning Dalvik cache
в—¦ Wipe Battery Stat - reset battery statistics
в—¦ Report Error - report an error
в—¦ Key Test - Key Verification
в—¦ Restart adbd - reboot the ADB server
в—¦ Process dump - firmware dump

gettingS-ONon flyer

dear gentlemen be careful in using this operation possible educationbricks

for version 2.23.405.3

supported CID versions
HTC__001, HTC__E11, HTC__N34, HTC__203, HTC__102, HTC__405, HTC__Y13, HTC__A07, HTC__304
, HTC__032, HTC__016, HTC__054

download the archive unpack

a) put the hboot_1.11.0003.nb0 file on the sdcard
B) reboot into recovery
b1) BAdb(availability of a working ADB main) enter commands (after each command, press enter (Enter)):
adb devices
adb shell
su(if you have a ROOT on the device, you do not need to enter)
c) create a backup copy of alpharev hbootdd if = / dev / block / platform / msm_sdcc.2 / mmcblk0p18 of = / sdcard / backup.img
d)
install the loaderdd if = / sdcard / hboot_1.11.0003.nb0 of = / dev / block / platform / msm_sdcc.2 / mmcblk0p18

After the file has been written to ADB, you can reboot. And look at the words LOCKED and S-ON

Install the firmware version2.23.405.3using update installer for BB.hboot_1.11.0003.zip(329.61 KB)

I think on the basis of this instruction, you can return to any firmware if you use HBOOT _______. nb0 from the firmware you want to switch to.

how to check CID

Download and install the CID_Getter program, after installing and running, read the top line in the application window that opens and this will be your CID
CID_Getter.apk(78.41 KB)
for which country your seed can be checked by opening the text file cid proverkacid_proverka.txt(3.29 KB)

using terminal

Downloading a terminal from the market (I downloaded the Android terminal with a white icon), launch it and enter in the window that appears
getprop ro.cid
[ro .cid] appears: [*** _ _ ***] is the cid of your device.

discussion of the utility for getting S-OFFFAQ on S-OFF Revolycionery
temporary root instructions for obtaining

miscellanea

ChainFire 3D settings

download the program versionPRO from here
we execute instructions from the heading according to the programup to point 4;
Next, download the gamelet's say this, install (a window will appear at startup, such as the need for a dual-core device and something else) click OK, the game will stop.
Run the program Chainfire 3D select itemDefault OpenGL setting=>remove all the checkboxes
then go back one item and select the menu itemPer-App OpenGL settingin sectionRecently used appslooking for our gameRiptide gpselect it by clicking on the name.
uncheck the boxUse default setting
Next, select the itemUse pluginin the pop-up window choosenvidia(since the tested game is intended for this platform)
Next, select the itemLaunchand play; or you can simply close the program and start the game through the menu.

radio from firmware

You need to rename the archive to PG41IMG.zip and drop it on the card and reboot into fastboot mode. After installation, delete
from firmware 2.23.405-Radio_20.3504.30.089BU_3809.07.04.06_M

Cap updates

10/31/11 - added an alternative link to firmware 2.23.405.3
10/23/11 - added a link to a new rum
09/20/11 - added a way to install custom recovery after unlocking via HTC DEV
08/30/11 - added instructions for setting up ChainFire 3D in the section

пїЅпїЅпїЅпїЅпїЅпїЅ download

08.26.11- slightly reworked the instructions section (added firmware order)
08/20/11 - added updated recovery archive version 4.0.1.4 (before this was version 4.0.0.5)
08/15/11 - added instructions for getting s-off on Hboot version 1.11.0003
08/13/11 - added radio from firmware 2.23.405.3
- collected part of the instructions in the header
-updated custom firmware database
07/22/11 - added links to the post with instructions for receiving TEMP ROOT
07/21/11 - added links to posts with official firmware

READ MANDATORY TO ALL

Comrades! Do you want to see the Android OS 4 for our device?I hope the answer is yes, so ..
In the next topic, the guys unanimously supported the initiative to “bombard” the technical support of the NTS with “letters of anger”. Only a dozen letters can not help. There must be hundreds of them. Then maybe we will achieve our goal.
Therefore, ALL-ALL-ALL is a big request to send the written down (or your) appeal to the NTS company, filling out the form:http://www.htc.com/en/contact/#email

Here is an example of an appeal that I sent to the NTS company (you can use it, change it, or create your own):
"Hello. Making a choice between tablets of many different companies in favor of the device from the NTS company, namely NTS Flyer, I expected to get a modern and functional device not for half a year, but for at least a couple of years. With each release of the new OS, Android becomes class is higher and friendlier to the user. Having bought Flyer, I, of course, expected to receive these benefits in the future. However, having learned now that my device does not plan to update the Android system at all, I was not only disappointed in my choice of device, but also in NTS companies in general. By comparison, Nokia releases OS updates for its 2009 release devices, and NTS is not going to release an update on the 2011 model! If the company's position on this issue does not change, then HTC Flyer will be the last device I bought from NTS companies. "

IMPORTANT:If a forum member gave you good advice that helped you solve your problem, do not post a message with the text “Thank you! You are super!!!". On our forum, it is customary to express gratitude by raising the reputation of a particular participant. If you do not have 15 helpful posts, ask the moderator to raise the reputation of the person who helped you through the "Complaint" button.

ATTENTION! ALL THIS IS MADE AT YOUR OWN RISK. IN THE EVENT OF A FAILED EXPERIMENT, RESPONSIBILITY NO ONE BEARS

K

There is no curator in the subject. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Prior to the appointment of the curator, on filling caps, please contactmoderatorssection through the "Complaint" button under the messages to which you want to add links.

Post has been editedPlutonLine - 24.09.14, 18:51

Reason for editing: added links to download official firmware

[Apostle666]

Help is needed. There is a device for Africa (cid HTC_016), no matter what firmware it is, I get the absence of the Russian language. How to change cid to Russian or superside?

[Lehaha]

Good day to all.
Maybe someone will tell you - you can make a full backup before getting the root and installing CWM?
Full - in the sense that after a hard reset, restore all programs to the "as it was" state.

[Rudzil]

There is a necropost question: is it possible to flash 2.00.405.3 (2.3.3) with a root and s-off core from a droid firmware (2.3.4)?