Assistant
REPLY |
Chinese netbooks Windows CE | discussion |
Message#1 11.10.11, 16:08 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 464 Check in: 20.09.08 Jiayu G3S Reputation: 105 | ���������� ����, ����������� ������������ � ���������� ���������� ����� �� �����. downloadA section dedicated to smartbooks on WM8505, WM8650, Jade Z228 and the like. First we study this: F.A.Q. (newcomers must read !!!) AT: What is a smartbook? ABOUT: The term "smartbook" is increasingly referred to as computers, representing a kind of laptop, only built on hardware and having operating systems more typical of smartphones and GPS navigators (Android, Windows CE). Mostly, smartbooks are made in China. AT: What is the difference between smartbooks built on WM8505 and WM8650 chipsets? ABOUT: The main differences: 1. WM8505 has a processor frequency of 300 MHz and 128 MB of RAM. Supports Windows CE 6.0 and Android 1.5 / 1.6. 2. WM8650 has a processor frequency of about 650 MHz and 256 MB of RAM. Supports Windows CE 6.0 and Android 2.2. Plus, there is hardware video decoding up to 720p. AT: I heard somewhere that the WM8505 chipset has several versions / revisions ... what is it and what is the threat? ABOUT: That's right, there are 3 revisions of WM8505. The main difference is that the Chinese, trying once again to minimize the cost of producing smartbooks, replaced the more expensive and fast Nand-memory, which is in revisions 1 and 2, with a "stupid" soldered USB-flash drive in revision 3. It threatens By flashing a smartbook with a chipset 3 revisions with firmware from revisions 1 and 2, it will stop booting from the built-in USB flash drive. Fortunately, to solve this problem, there is my version of the firmware Windows CE 6.0 for WM8505 revision 3 (there is no Android). AT: Hoo-go-shechi, so how do you choose the right smartbook? ABOUT: Very simple ... do not buy WM8505. It is better to pay about 5-10 dollars for a more productive WM8650, with which there are no problems. AT: And how are things going with the games? ABOUT: On WM8505 - no way. A few toys like "Klondiasc", it is not necessary to rely on more. On WM8650, everything is much better ... better if you install Android 2.2 :). It works well emulators consoles, with little or no brakes go Angry Birds, Treasures of Montezuma, Farm Frenzy and the like. AT: And office documents have the ability to view / edit? ABOUT: Yes. And under WinCE and under Android there isfulloffice applications. AT: Does mp3 music play? ABOUT: All smartbooks perfectly reproduce mp3, regardless of the chipset and firmware (WinCE / Android). AT: As for the hardware video decoding up to 720p on WM8650, it seems to be understandable ... can you watch DVDRips on it? ABOUT: You can, but only watch :), because there is no support for AC3 format (6-channel sound). If you overtake the sound in stereo, then everything will be fine. AT: Then what's the catch of this hardware decoding? ABOUT: The joke is to watch, for example, video from Youtube in HD and absolutely without brakes. The picture is just amazing. AT: What's up with Flash 10? ABOUT: On WM8505 - no way. On WM8650 with Android 2.2 installed - great. AT: Youtube? Flash 10? Great! Kokraz was planning to connect a smartbook to a Wi-Fi home point ... only I doubt something about the quality of signal reception ... ABOUT: No need to doubt: yes2 :, and on WM8505 and on WM8650, that with Windows CE, that with Android - the quality of receiving a Wi-Fi signal is at a height. I myself sit at home on the Internet via Wi-Fi point - smartbooks show the maximum signal in all rooms. AT: Eh ... I’ll probably order it ... but how are they for convenience? ABOUT: Working with such smartbooks is quite comfortable: no squeaks, no backlash, the halves hold tight, the keys on the keyboard are elastic, have a pleasant move. But there are also disadvantages - it is a very small touchpad and non-standard placement of X, b, E keys (on 7-inch models). Since the keyboard was “sharpened” under the English layout, and the size of the device did not allow to make it identical to the “normal” keyboard, some keys with special characters were shifted, and accordingly these letters flew away with them. On 10 "smartbooks there are no problems with the placement of keys. AT: Ordered! Brought! However, it is strange ... the smartbook is originally on Android 2.2, but there are some problems with a flash and everything works rather slowly ... ABOUT: It all depends on the firmware. Download my mod from Uberoid version 9.1.2 from the first page and everything will be fine. AT: So we will reflash ... It is a pity that I have a memory card of only 256 MB ... probably will not work: scratch_one-s_head :. ABOUT: Even as suitable, 256 MB is enough. AT: So it is also with the Micro SD adapter ->Mini SD, okay? ABOUT: Scary nothing will work. AT: It’s good that my card will work, otherwise the boys advised to install a light version of Windows XP on a smartbook, or at least Windows 98, they say that the power will be enough, and the RAM too. Where can I download them? ABOUT: Nowhere. These smartbooks have a completely different processor architecture, respectively, they are not compatible with either Windows 98 / XP or programs written for these OSs. AT: It's a pity, but now I won’t decide what to install on my smartbook with WM8650 - WinCE 6.0 or Android 2.2 ... What do you recommend? ABOUT: Given all of the above - Android. Let WinCE and boot several times faster, and the interface is more familiar, but still this platform has outlived its usefulness. The availability of a full and fast web browser, tons of applications for every taste and color and support for the hardware capabilities of the WM8650 chipset are undeniable advantages in favor of the Android OS. Have questions? Contact us! The most significant questions and answers will fall into this F.A.Q. F.A.Q. problem solving (newcomers must read !!!) AT: Put your WinCE on your tablet, but the touch screen doesn't work ... what can I do? ABOUT: At the moment, nothing, since I do not have a tablet. There is a desire to be a tester - write, we will try, or if you find the firmware where the touch screen is already working - I will help you to assemble a normal mod. AT: I put a WinCE smartbook on it and I want to install the program, but instead of installing it, a window pops up quickly and nothing happens. ABOUT: Most likely this is due to the fact that the installation * .cab file with your program is packed using compression, which is not supported by our smartbooks. To solve this problem, you need to download this one program, open your * .cab file in it, go to the "Cabinet" tab and uncheck the "Compress the CAB file" box, then save the file. It is also recommended to select the "All / CEF" item in the "Processor" column of the "Cabinet" tab and enter zeros in all windows of the "Operating System" tab. AT: I'm trying to flash my smartbook with your firmware, but nothing happens ... what's the problem? ABOUT: The problem is that you need to know exactly what and what you are reflashing. In addition to the most common WM8505 and WM8650, there are a bunch of other chipsets on which smartbooks are built. That is why, we first disassemble the smartbook and write out everything that is written on the chips, and only then ask questions. AT: Everything, with the search for the firmware figured out. But now, the process of flashing begins and suddenly everything freezes ... what could it be? ABOUT: This problem may be due to the fact that you forgot to format the memory card before copying firmware files to it. AT: I rebooted and everything seemed to be successful, but now the smartbook is stumbling on the Windows loading label. What to do? ABOUT: Alas, you now have to keep a special scriptcmd file on the SD card. Take a look here . Have questions? Contact us! The most significant questions and answers will fall into this F.A.Q. Smartbook identification instructions (in pictures) To identify your smartbook and make the right choice of firmware, you just need to disassemble it and check the “guts” with photos. So let's get started: Firmware: Firmware for7"smartbooks on the chipsetWM8505 2 and 3 revisions Firmware for 7 "smartbooks on the chipsetWM8505 2 and 3 revisions Windows CE 6.0 RUS (modified firmware v.2.1 by PC_USER ) Size: 67.19 MB List of changes, it’s version history Changes in version 2.1: System: *Restored logo display when enabled Programs: *Installed Total Commander v.2.1 *7-Zip v.9.20 updated to 7-Zip v.9.22 *Built 4 simple games Changes in version 2.0: System: *RESTORED DOWNLOAD WITH BUILT-IN USB FLASH !!! SD CARD IS NOT NEEDED anymore !!! Programs: *Installed Mail.ru Agent v.3.1.56 (101123) Registry: *Cleartype feature activated *System File Cache Activated *Font cache activated Changes in version 1.0: System: *Wince 6.0 fully in Russian *Sounds and graphics are replaced by similar from Windows XP *Built-in GAPI emulator *Embedded .NetCF v.3.7.8345.00 *Built tgetfile.dll *Built cabinstl *File Associations Configured *The setup process is fully automated. Programs: *Installed MortScript v.4.3b15 *Installed 7-Zip v.9.20 *Installed Resco Photo Viewer v.6.33 *UCWEB installed *AlReader2 installed *All programs are updated to the latest correctly working versions. *Most of the programs translated into Russian *Program icons are replaced by similar ones from Windows XP Registry: *Cleartype feature activated *System File Cache Activated *Font cache activated Miscellanea: *Added wallpaper from Windows XP Instructions for flashing 1).Unpack the “script” folder from the archive with the firmware to the root of the SD memory card formatted in the FAT32 file system. 2).Insert the card into the smartbook and turn it on - the Chinese WinCE will boot and the automatic flashing process will start. 3).When the window pops up asking you to remove the SD card, we retrieve it and restart the smartbook. 4).After the first boot, we wait for the automatic configuration to take place and the smartbook will reboot. All is ready! Windows CE 6.0 ENG (corrected factory firmware, not recommended for installation) Size: 54.50 MB Instructions for flashing 1).Unpack the “script” folder from the archive with the firmware to the root of the SD memory card formatted in the FAT32 file system. 2).Insert the card into the smartbook and turn it on - the Chinese WinCE will boot and the automatic flashing process will start. 3).When the window pops up asking you to remove the SD card, we retrieve it and restart the smartbook. All is ready! Debian Live SD ENG (everything you need to create a bootable SD card. For all versions of WM8505) Size: 137.42 MB Instructions for creating a bootable SD card 1).We take an SD memory card of 1GB or more and delete ALL partitions on it using any disk utility (Paragon partition manager, Acronis disk director, etc.). 2).Run the file “DebianInstall.exe”, select our SD card in the drop-down list and click “Install”. 3).When the slider below reaches the end - close the program and insert the SD card into the smartbook. All is ready! Android 1.6 (judging by the reviews, the most adequate firmware. Only for revision v.2 with Nand-memory !!! ) Size: 70.78 MB Firmware for7"smartbooks on the chipsetWM8650 Firmware for 7 "smartbooks on the chipset WM8650 Windows CE 6.0 RUS (modified firmware v.2.0 by PC_USER ) Size: 80.40 MB List of changes, it’s version history Changes in version 2.0: *Fixed transfer of Russian words in the interface !!!!! *Fixed translation inaccuracies *Removed English interface language *The default keyboard layout is Russian. *The registry was rebuilt to normal_nk.nb0 (now everything is set up immediately after the first start!) *Cleaned up unnecessary services (removed SIP and a couple of services like Chinese input) *Removed on-screen keyboard *Removed debris from firmware *Renamed discs *Window animation disabled *Fixed GAPI *Replaced some cursors *Replaced icons *Replaced system sounds with sounds from Windows XP *Changed device description in system properties *The following items were added to the control panel: “Bluetooth manager”, “Fonts”, “Small tweaks” *The game "Balls" replaced by a newer version *Added game "BrickShooter" *Added "Paint" *Added 15 desktop wallpapers *Removed Skype and Mail.ru Agent (it was not possible to get them to work properly) Changes in version 1.0: System: *Removed all languages except Russian and English + removed garbage from the firmware *Fixed translation inaccuracies *Replaced inscription and logo when enabled *Some of the sounds and most of the graphics are replaced by similar ones from Windows XP *Built-in GAPI emulator *Embedded .NetCF v.3.7.8345.00 *Built tgetfile.dll *Built cabinstl *File Associations Configured *The setup process is fully automated. Programs: *Installed MortScript v.4.3b15 *Installed 7-Zip v.9.22 *Installed Resco Photo Viewer v.6.33 *UCWEB installed *AlReader2 installed *Installed Total Commander v.2.1 *Installed Mail.ru Agent v.3.1.56 (101123) *Built 4 simple games *All programs are updated to the latest correctly working versions. *Most of the programs translated into Russian *Program icons are replaced by similar ones from Windows XP Registry: *Cleartype feature activated *System File Cache Activated *Font cache activated Miscellanea: *Added wallpaper from Windows XP Instructions for flashing 1).Unpack the folder "script8650" and the file "wmt_scriptcmd" from the archive with the firmware to the root of the SD memory card formatted in the FAT32 file system. 2).Insert the card into the smartbook and turn it on - the Chinese WinCE will boot and the automatic flashing process will start. 3).When the window pops up asking you to remove the SD card, we retrieve it and restart the smartbook. All is ready! Android 2.2 (Universal Uberoid 1.5.5 HoneyCombMOD v10.1 by HardcoreHacker )( link to the original theme ) Size: 104.8 MB Major changes (in English) *Live Wallpaper Support! ("butterfly" live wallpaper included!) *HoneyComb styled launcher, framework and icons *Extreme WM8650 compatibility (80 models +!) *Run CHANGER to make the ROM compatible with your device using Windows, Linux or even from your tablet! *Customizable ROM, make it even more LITE for example (see CHANGER 'x' for more info) *100% Rooted *Audio boosted *Updated BusyBox to 1.19 *Memory cleaning boosted *Memory read / write boosted *Lite version, stripped away many apps *Tries to support as many languages as possible *Real working Google Market Version History (in English) v10.1: * Fixed Opera problem * Fixed audio problem * Fixed some scripts (Thanks Leeh33 !!!) * Changed phone support to native E10 rom apps v10.0: * fixed a handful of boot errors * new boot animation * TED is now the default text handler * file expert is the default file browser * meridian player default media player * opera mini 6.5 * new launcher look * updated boost scripts * rebuilt dalvic cache * modded a new and expanded default.prop * rebuilt honeycomb mods * complete new rebuilt on 1.5.5 m009s firmware * a lot of stock apps back * pre installed google voice search * added all addition android libs * more options available in settings * working google voice search * fix icons: clock, calculator calendar, my browser, my video, camera, settings * phone support back * fixed missing icon * fixed camera and settings problem due to new android fs * enable phone support in changer * modular phone support package * disabled auto update of time * disabled OTA * messaging support back * fixed several battery problems * fixed m003s support * added HcH's TechKnow RSS app v0.2 * added live wallpaper support * fixed memory loaders for better performance * modded boot behavior v9.1.2 * disabled updates (prevent unnecessary downloading OTA packages which fail to install) * disabled auto time (caused by hick ups while using the tablet every minute) * disabled cell support in build.prop * downgraded market to 2.3.6, better perfomance and less problems / crashes. * restored getenv (wmt by wmtenv) * changed / updated kernel for m008s * updated m003s support to 1.5.5 * v1.5.5 firmware based * added HcH's TechKnow RSS app v0.1 * fixed sound option 13 setenv wmt.audio.i2s vt1603: f1: f2: ff: ff: ff * fixed camera and entire m008s option * changed back kernel for option 42, in order to solve the TS problem * extended default.prop * removed phone_support * entirely rebuilt arabic support libs * fixed option 1 battery problem * fixed option 8 battery problem * fixed option 9 battery problem * fixed option 18 battery problem * removed 26 ite7260CAP151 (dupelicate of SV27C) replaced with puzhi_7inch_vt1609_ts * removed 28 m009d131 replaced with TP_puzhi_7inch_vt1609_ts_152 * redone kernels (removed m003s / m008s / 153 / e10 kernels) v9.1.1 * added 2 nice livewallpapers: org.jraf.android.logcatlivewallpaperlite.apk and com.Gnathonic.SystemStatsLive.apk, both with optimal presets. * redone CHANGELOC to a better code * created PHONE_SUPPORT, a tool to enable / disable phone support in the ROM * added google contacts sync * added google calendar sync * fixed option 42's battery (please report if it's working!) * fixed M80003W support * option 22 m008s with a older envset in order to get TS working * option 18 TomTec 10 "has now 3070v2 default v9.1 * new build.prop * updated google market to 3.1.6 * default wifi powertx = 30 (remove FirmwareInstall \ packages \ fs_patch \ root_patch \ system \ etc \ Wireless \ RT2870STA to get 100 back) * updated superuser bin to 3.0 (not the app, the su3 request box is too small to read properly) * added angry birds 1.6.3 * better floating point for ARMEABI (write / proc / cpu / alignment 4 = 3) * added modded eStrongs File Explorer with Root default enabled! * removed root explorer * scaling governor for better battery life * Linux CHANGER! Also works with android (use an app like Script Manager to execute the .sh file) * updated m012s to 1.5.1 * call function is back * fixed audio for 5 "tablet * fixed camera on m009d * fixed wifi on m70007t * fixed battery on 8, 13 and 20 * fixed the m80003w support * added JSA-8inch_std_vt1609 support * added 8inch_vt1603 support * added 8inch_vt1609_ts support * added aPad 2 aka J355 10 "support * added E10 7 "support * added CEM8650972 support * added CEM8650971 support * added CEM8650801 support * added CEM8650702 support * added CEM8650701 support * changed wmt.vt160x.bat 0: 1: 10: 0 to wmt.vt160x.bat 1: 0: 10: 0 for option BLY-706v1 * changed wmt.vt160x.bat 0: 1: 10: 0 to wmt.vt160x.bat 1: 0: 10: 0 for option BLY-706v3 * changed wlan support for option BLY-706v1 v9: * created HoneyComb icons for the launchers * redone M008s support * added ZX07D 1.5.1 env set * updated option 15 to 1.5.1 env_uboot * fixes battery problems (some env_uboot files line the line 'setenv wmt.vt160x.bat 0: 1: 10: 0') * fixed 5 "audio support * google market 2.3.6 * updated BusyBox to 1.19 * updated build.prop thanks to leeh33 * updated check routines to prevent bad flashes * added Turkish support * added Thai keyboard * added Turkish keyboard2 (http://www.taypo.com/blog/turkce-klavye.html) * created CHANGELOC, call it by typing 'LOC' in the CHANGER. * started work on bengla support, it's a work in progress, do not use it yet. * redone with base ROM v1.5.3 from Easydy v8: * added VTL Launcher 1.6.5, removed ADW * modded VTL Launcher * preloaded some widgets * optimized volumes * updated Busybox to 1.8.4 * redone scripts * modded boot behavior * added Xiron support * fixes previous slow 1.5.1 installations * fixed cam support for all devices * added live wallpaper support * added rt3070 wlan support * 100% rooted * modded built.prop>fixed model * modded built.prop>extra setting * modded default.prop>no lockscreen * included HcH's BOOOM (boosted optimized out of memory) * boosted RAM cleaning * boosted SD / NAND read / write speeds * boosted audio speakers volume * added superuser.apk * added google services framework * added google calendar sync adapter * added google contacts sync adapter * added google market 2.3.6 * added youtube * added su bins * removed wonder appstore * removed facebook app * removed skype app * removed tudou * removed wmt youtube * removed about all extra apps * removed documents to go * removed WMTWeather * removed WMTPhoto * cleaned dalvic cache * cleaned data * created dirs: FirmwareInstall \ packages \ fs_patch \ localdisk \ music / photo / video * cleaned data_app * removed Res_WmtWeather.tgz * removed Res_WmtPhoto.tgz * included HcH's anti spy patch * added arabic support * added thai support * added changer.bat * updated changer.bat to work with slightly different env of 1.5.1 * added uboot environments from Uberoid v6 * updated uboot env set for m009s to 1.5.1 * redone wmt loaders * MVPS host file July-23-2011 for blocking unwanted parasites v6.3 FiNAL * re-rooted * fixed notification background in framework * fixed arrow problem (arrow is in WMT Launcher) * re-added WMTLauncher because ADW Launcher Free isn’t that good as EX * patched Wifi for better connection * Changer now also makes a LiTE edition * updated CHANGER.BAT to support even more devices * removed WiZARD.BAT, too lame to update, use CHANGER and the SDTOOL but it doesn’t have a copy of the sd to CHANGER. * added command 'sdformat' to CHANGER for those who want to format as well * changed format / copy or a sd format / copy * added 10 "support * fixed 8 "divided installation screen problem * updated w-load * upgraded green led kernel to 1.3.1 * Fixed arrow in FS (slipstreamed wmtlaucher) * Fixed problem of 0byte packages using lite version in software overview * Create easily a LiTE edition, use CHANGER, type "LITE"<enter>, to undo, type "UNLITE"<enter>. This removes \\\\ firmware \ install \ packages \ fs_patch \ data_patch * Included Arabic support for our Arabic friends, run CHANGER, type "AR"<enter>and the rom will have a patch. Use "UNAR" to remove patch. * Included Thai support for our Thai friends, run CHANGER, type "TH"<enter>and the rom will have a patch. Use "UNTH" to remove patch. 6.2 * Changed ADW Launcher EX to ADW Launcher since EX version is paid. * Modded ADW Launcher HoneyComb Theme incl. Juliojs's HoneyComb Clock (get the pro, it has nice features!) * Modded ADW Launcher with AndroidGFX's HoneyComb Theme. * Modded ADW Launcher with AndroidGFX's HoneyComb Wallpaper pack (LiTE). * Modded Android Framework with HcH's HCFrameworkMOD, using the gfx's customized honeycomb sdk and about 40. * Updated CHANGER and WiZARD, supports 30 models now. * Included LauncherPro v0.8.6 (FirmwareInstall \ packages \ fs_patch \ data_patch \ app) * Included ymst.android.homeswitcherfroyo.11.apk (FirmwareInstall \ packages \ fs_patch \ data_patch \ app), for easy switching between launchers. * Changed to a better readable modern font (FirmwareInstall \ packages \ android2.2-froyoNEWFONT.tgz, remove default and flash) * Redone patching structure, if you do not want to use it, mod mod FirmwareInstall \ Packages \ android2.2-froyoHcHHCFW.tgz and flash. * Changed WiZARD / SDTOOL auto format * Redone framework to create it, remove it from the firmware \ install \ packages \ android2.2-froyoHcHHCFW.tgz and android2.2-froyoNEWFONT.tgz if you want stock looks) * Fixed timezone problem * Rebuilt package lists * Updated video libraries * Updated video support (\ FirmwareInstall \ packages \ fs_patch \ root_patch \ system \ lib \ libmediaplayerservice / libavformat) * Rebuilt Dalvic Cache * Reconfigured Launcher Pro * Set ADW Launcher as default launchers * Added skypelibs * Updated library files with newer builts * Fixed TS calibration problem * Updated Settings * Updated Settings Provider * Added BETA Shenzhen Easydy DEVICE SUPPORT in FirmwareInstall \ env: -E16_5cun1603 = Easydy E16 (5cun1603) 1.2.3 5 " -ED99_8cun1603 = Easydy ED99 (8cun1603) 1.3.0 8 " -E18_7cun1603 = Easydy E18 (7cun1603) 1.3.0 7 " -ED99_8cun8900 = Easydy ED99 (8cun8900) 1.2.2 8 " * In order to use these, rename the env_uboot (delete existing env_uboot). It looks like I’m not sure about these devices myself. I could add these to the CHANGER? Thanks in advance! 6.1 * De-WorMT'ed edition * Green LED kernel changed, cam / hib problems should be resolved. Tested on 2 devices. * Fixed set for m003s, the updated 1.3.0 uboot env shows new settings for TS codecs. * Lite version, removed google maps / docs / streetview / gmail / launcherpro / iReader / wmtlauncher / angrybirds / homeswitcher / wmtlauncher * Fixed menu background invisible text by e.g. settings ADW Launcher / titanium backup * ADW Launcher is default now v6 * Increased string sorting capabilities * Changed WifiTX from 100 to 30 (FirmwareInstall \ packages \ fs_patch \ root_patch \ system \ etc \ Wireless \ RT2870STA) * now supports more devices! like BLY 806 * updated kernel blue led to from 1.3.0 to 1.3.1 * updated kernel green led to from 1.2.3 to 1.3.0 * created WiZARD, a tool that combines the CHANGER and SDTOOL, recommended for first time users. * updated CHANGER.BAT * included 8 new 800x600 backgrounds to the launcher * Fixed 2D Low FPS problem * optimized dalvic cache * new power saver, wifi scan interval is delayed * optimized launcher * added 8 new wallpapers * Included honeycomb fonts * quickboot, just a little faster! * build.prop updated * flash modded * boosted RAM cleaning (makes task killer unneeded) * removed Advanced Task Killer * boosted audio a bit * Fixed m003 / m012s Touchscreen calibration problem * Fixed M80003W Touschreen problem * Removed permanent M008s support as I can't test this without a device. * Increased 2D FPS, a lot * * Fixed cpu speed info * created SDTOOL for formatting the SD and copying Uberoid to the SD * updated honeycombtheme framework: -airplanemode -scrollbars -SDCARD -Gallery -Textfield -TimePicker -Buttons -Download arrow -Star -Search buttons -Media Player Button -Notify -Spinner -Color -Battery -Wifi -Bar - + 2 fixes * app: com.antutu.ABenchMark FPS Uberoid v5 = 81FPS FPS Uberoid v6 = 206FPS v5 * Now supports 20 devices! * Fixed Google Earth installation problem * Re-Modded HoneyComb framework to lite edition * Fixed battery charge mod * Removed cell standby icon * Fixed too big letter in keyboard pop up box issue * Added M008s support * Updated CHANGER.BAT * Added Alkido Reader v4 * Fixed Camera and hibernation problem on 8 "M80003W * Boosted battery life a bit more * Maybe update GTalk ... this version is kind of old * Fix the problem of the M80003W Touchscreen support and calibration * Mod the framework to be HoneyComb * Removed m008s support * Update flash to 10.2 / 10.3 (if possible) (update, not possible, only for ARMv7 and up) (flash lite) * Added wifi PowerTX 0.6b * Added support for ATF3416-7 (only changed setenv wmt.io.ts.2dcal 3 -17438 67608023 11859 10 -5362731 80387) * Added support for BLY-706F v1 * Added support for BLY-706F v3 * Fixed battery / TS of PC-802 env v3 * Boosted battery, removed cell standby (monitor shows it using 80% of battery usage), boost seems to be a wake up. * Disabled mock locations default * Fixed M80003W cam and hibernation support * Fixed TomTec number * Modified framework to be HoneyComb style * Modified Batterymeter to be HoneyComb style * Fixed Google Earth install problem * Updated GTalk * Removed M008S support * Change M80003W TS codec from vt1603 to uor615 * Enabled non market installations * Disabled a unneeded service * Included HomeSwitcher * Fixed time set problem * Better touchscreen responsiveness * Updated Youtube to 2.1.6 * Rebuilt Dalvic Cache * Removed Skype * Removed Tudou * Added Google Streetview 1.6.0.6 * Added Google Maps with Navigation 5.4.0 * Added Google Docs 1.0.6r * Added Google Talk * Added Appmonster 2.0.5 free * Fixed Angry Birds * Fixed About Device problem * Added another kernel to install the switch. * Updated CHANGER.BAT to change kernel with model * Patched Wifi Power to TX 20 * Changed Wifi Power Patch as root_patch FirmwareInstall \ packages \ fs_patch \ root_patch \ system \ etc \ Wireless \ RT2870STA (TX = 100 back) * Fixed Google Setup, setup your account on first boot * Added M008S Support (TEST!) * Removed M009s 1.2.3 ubootenv * Fixed PC 802 sound / cam problem * Fixed M009s Green LED hibernation cam problem * Fixed M003s sound problem * Fixed M012s sound problem v2 * Fixed Flash 10.1 * Lite HoneyCombMOD version * Included anti malware / spyware host blocking file * Patched Installer * Cleared packagelist * Fixed sync problems * Re-enabled tx = 100 due to all reported problems with WLAN v1 * Hybrid LED / M003S / M012S / VIA WM8650 / M80003W and more using CHANGER.bat * Included HoneyComb Music player * Fixed Gmail and Updated Gmail * Fixed root * Real Google Market * Imitating a Galaxy Tab, all secured apps are on the market now. * Boottext * Removed dupe apps -20mb * Removed sample movies / pics / mp3s -25mb * Enhanced Scrolling * Enhanced Wifi Battery performance * Increased Dalvic cache size * Increased audio volume * Pre-Modded ADW Icons HoneyComb theme * Included 2 special HoneyComb wallpaper packs * Pre-Modded Go Launcher with HoneyComb theme icons * Optimized sys RAM auto clearing * Added GMAIL * Included Res_WMTPhoto LITE, -30MB * included 8 new wallpapers * Rooted (after first reboot) * Modded installation logo * Added SuperUser * Boosted SD memory access * Added extra launchers * All menus now in English Instructions for flashing 1).Unpack the archive with the firmware on a memory card formatted in FAT32. 2).Since this is a universal firmware for more than 80 devices on the WM8650 chipset, run the changer.bat file and select the “M009S Blue LED” model (number 2) and click “Enter”. 3).We insert the SD memory card into a smartbook that is charged or connected to the network and turn it on. 4).When the bar at the bottom of the screen reaches the end - remove the card, after which the device will automatically reboot. Good luck :). Android 2.2 (modified firmware v.2.0 based on Uberoid v10.1 , the authors: HardcoreHacker, PC_USER ) Size: 79.20 MB Changes from Uberoid v10.1 System: * Russian immediately after the firmware * Replaced animation when enabled * Minor settings are made. * Cleaned unnecessary files Installed: * ruKeyboard v1.6.0 r73 beta1 Disabled: * Camera.apk * Provision.apk Removed: * live.wallpaper.butterfly.fantasia.11.apk * com.opera.mini.android65.apk * com.google.voicesearch.211.apk * Development.apk * SystemStatsLive * PicoTts.apk * TtsService.apk * TelephonyProvider.apk * LatinIME.apk * HcH's TechKnow RSS app v0.2 * CustomLocale.apk * CarHome.apk * CarHomeLauncher.apk * Contacts.apk * ContactsProvider.apk * DeskClock.apk * Gmail.apk * GoogleContactsSyncAdapter.apk * HTMLViewer.apk * UserDictionaryProvider.apk * Protips.apk * QuickSearchBox.apk * Ted_beta0.9.apk * SpareParts.apk * SpeechRecorder.apk * DrmProvider.apk Instructions for flashing 1).Unpack the archive with the firmware on a memory card formatted in FAT32. 2).We insert the SD card into the smartbook and turn it on - the automatic flashing process will begin. 3).When the bar at the bottom of the screen fills up to the end, and a green text appears below it - remove the SD card and wait until the smartbook is loaded (the first launch will be long). 4).Go to "Settings" ->"Language and keyboard" ->put a tick in front of the "Russian Keyboard". Now the switch layout will work by pressing ALT + SHIFT. Good luck :). Firmware for7"Smartbooks Selar EPC 730, Q.Media and others, based on the processorJade Z228 Firmware for 7 "Selar EPC 730, Q.Media and other smartbooks, based on the processorJade Z228 Windows CE 5.0 Dut (factory firmware, interface language - Danish!!! ) Size: 14.36 MB Instructions for flashing 1).Insert the formatted SD card into the card reader. 2).Run "SDUpgradeTools.exe" from the archive. 3).After starting the program, click on the "image" button. 4).Select the file "SD_DUT_US.nb0" from the archive and click "Open." 5).Click on the SD card icon in the lower left corner of the program in order to upload the firmware image to our SD card. 6).When the window flies, click on OK. 7).Click on the red button "X" in the lower right corner of the program to exit the program. 8).We take out the SD card from the card reader and insert it into the SD port of the smartbook. 9).We turn on the smartbook and wait until the flashing process starts automatically, after which the smartbook will load the new Windows CE. 10).We take out the SD card from the smartbook. All is ready! Russifier Size: 306.58 KB Instructions for installing the crack 1).Unpack the archive on the SD-card. 2).Insert the SD card in the smartbook and run the file "Shell.exe" from the unpacked folder. 3).We wait. Firmware for10"smartbooks on the chipsetWM8650 Firmware for 10 "smartbook on chipset WM8650 Android 2.2 (Factory firmware) Size: 197.24 MB WinCE 6.0 Search for firmware Archos arnova 10 - if you can help with something, contact the user kajan or to me. Modifying scriptcmd parameters: Instructions for editing the files "scriptcmd", "rescriptcmd" and the like To edit the firmware scripts, you need: 1).Open them in a notebook and completely remove the edges, which occupy 1-2 lines. 2).Change the required parameters. 3).Save as a text file with the name "script.txt" in the folder with the program "ScriptCMD Maker" (you can download it just below). 4).Run the file "Run me.bat" and get the output file "scriptcmd" :). ScriptCMD_Maker.7z(440.84 KB) Description of the parameters of the files "scriptcmd", "rescriptcmd" and the like (WM8505) setenv - setting variable parameters (setenv "name" "parameter") printenv - output variable parameters mmcinit - initialization of SD / MMC card reader usbinit - initialization of the USB subsystem usb tree - output tree of USB devices usb info [dev] - display available USB devices lcdinit - screen initialization Before using the 'lcdinit' command, you must specify 'lcdparam' and 'pwmparam'. If this is not done, U-Boot uses the default LCD and PWM parameters. LCD default parameters: 1.25000,8,800,480,48,40,40,3,29,13 PWM default parameters: 0,319,1000,750 lcdparam: version, pixclock, bpp, xres, yres, hpw, hbp, hfp, vpw, vbp, vfp, pwm_pcp, register (& | =) value Decryption: version: should be 1 pixclock: LCD Clock (KHz) bpp: 5: RGB565, 6: RGB666, 8: RGB888. It is the current version of the RGB888. xres: pels on X axis yres: pels on Y axis hpw: hsync pulse width hbp: hsync back porch hfp: hsync front porch vpw: vsync pulse width vbp: vsync back porch vfp: vsync front porch register (& | =) value: register & value or register | value or register = value (2) pwmparam: no, scalar, period, duty Decryption: no: PWM no. Range: 0 ~ 3. PWM to control LCD backlight scalar: PWM scalar. Range: 1 ~ 1024 period: PWM period. Range: 1 ~ 4096 duty: PWM duty. Range: 1 ~ 4096 cleanlcd - screen cleaning sdwaitins - waiting for removal / insertion of an SD card sdwaitins 0 - pending withdrawal sdwaitins 1 - waiting for insertion nand device [dev] - output or set the current device nand info [dev] - output available Nand devices nand bad - show broken sectors nand writeblob mem_addr nand_off size - Insert an 8-byte header to the memory contents and write it to nand nand readblob mem_addr nand_off - reading the contents of nand, deleting the 8-byte header and writing the contents to memory. sleep N - execution delay for N seconds (N is an integer !!!) msleep N - execution delay for N milliseconds (N is an integer !!!) Work with 3G modems: List of 3G modems supported by Android 2.2 WCDMA: *HUAWEI E220 *HUAWEI E230 *HUAWEI E169G *HUAWEI E169X *HUAWEI E1750 *HUAWEI E173 *HUAWEI W8 *HUAWEI E153 *HUAWEI E153u6 *VW718 / 719 *Alcatel AL720 *ZTE MF190 *ZTE MF110 CDMA2000: *Bora9380 *AWIT-U8 *Rate-EC186 *ZTE AC2736 TD-CDMA: *TD368 Attention! Before connecting the 3G modem to the smartbook, it must be switched to the "only modem" mode! Find out how to do this will help any search engine. List of 3G modems supported by Windows CE 6.0 WCDMA: *HUAWEI E171 *HUAWEI E173 *HUAWEI E1550 The list will be updated due to your feedback on the work of a 3G modem. Attention! Before connecting the 3G modem to the smartbook, it must be switched to the "only modem" mode! Find out how to do this with your particular modem model will help any search engine. Useful links: For Windows CE WinCE Software Catalog Programs for navigation devices Games for navigation devices Site[color = "# 000000"] of our forumchaninDeeman843 dedicated to smartbooks on WM8650. For Android The section dedicated to smartbooks on Allwinner / Boxchip A10. F.A.Q. (newcomers must read !!!) AT: Why did you separate smartbooks on WM8505, etc. from smartbooks on Allwinner / Boxchip A10? ABOUT: Because they are radically different from each other. The devices described under the previous spoiler, as a rule, are built on a long time ago outdated processors with the ARMv5 architecture and are much more likely to give only a headache than any joy of use. The new models based on the Allwinner / Boxchip A10 chipset incorporate hardware acceleration of video up to 2160p and three-dimensional graphics, and most importantly, a single-core processor running steadily at a frequency of about 1100 MHz (you can overclock even higher, but there will be glitches) with ARMv7 architecture . Plus, closer to the full-fledged OS version of Android - 4.0.3 / 4.0.4. AT: Now it is clear. And these new smartbooks are only 10-inch? ABOUT: No, there is also a 7-inch version. From smartbooks on the WM8505 / WM8650, it is distinguished by a more powerful stuffing and a built-in Webcam on some models. Appearance and stuff are identical. AT: Cool, and Skype with video calls, these devices support? ABOUT: Yes, there are absolutely no problems with video calls. AT: Do toys all go? ABOUT: Almost everything goes, and the “hard” games, too. There are two downsides - the lack of support for keyboard buttons in many games and inconvenience with games that work in portrait orientation. Perhaps a problem with the keyboard will solve the connection of an external joystick. I have not tried it yet and can’t say for sure. AT: How about movies? Hope nothing needs to be converted? ABOUT: As I said above - without brakes, video up to 2160P (FullHD stereo) is played. There has not yet been a single video file that this smartbook could not play. AT: I wonder if I want to run a 3G modem on it? Any troubles? ABOUT: Personally, my ZTE-MF112 wound up on its own, even without switching to the "only modem" mode. It was enough to insert the modem into one of the three USB ports and restart the smartbook. The only cant seen is when you go to sleep, the device apparently turns off the power to the USB circuit and the connection is lost. Perhaps over time there will be a solution to this problem. AT: Clear. Well, with the built-in Wi-Fi, everything is in order? ABOUT: With Wi-Fi everything is normal - there are no cliffs, the signal reception level is sure. Soon there will also appear a description of the devices, firmware, supplemented by F.A.Q. and other joys;) Additional Information - Everything you do with your devices, you do onYour fear and risk. - Copying any information from this topic is allowedonly!!! with reference to the original topic. That's right, because creating more or less adequate firmware and gathering / structuring all the information together took more than one day and even more than one month ... respect the work of others. - Forum FAQsavagemessiahzine.com - Forum Rulessavagemessiahzine.com A warning! - No need to clutter up the topic by duplicating the same questions 100 times. If you can not find the firmware for your smartbook - write to me in PM and I will add it to the "Search for firmware" section. - No need to ask "Why did I put your WinCE on mytabletdoes not work touch? ". This topic is dedicated tosmartbooks! They do not have a touch screen and even with all the desire I physically can not help you. Look for a topic where tablets are discussed. Messages containing the above, as well as containing questions that already have an answer in the topic header, will be deleted without warning! Post has been editedPC_USER - 30.08.12, 14:31 Reason for editing: Rebuilt the topic header, added a FAQ on new devices |
Message#42 06.04.11, 20:56 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1386 Check in: 07.02.08 Blackberry passport Reputation: 160 | serg ///, I tried all sorts of ways to start the system without the participation of the SD card (fingers and hands are not enough: D), and I got the feeling that something was broken in the BIOS, since all the necessary files on the flash drive are present. In addition, the normal_nk, safe_nk and logo.bmp files are completely identical to those that were at the time of the netbook purchase (yes, they have been preserved). This allows me to argue that the netbook is fully restored to the state at the time of purchase. Then the question arises, what kind of a fig he does not start as expected? There is no exact answer. It is possible that due to frequent unsuccessful flashing in the BIOS, something got off and could be started in this case using a prepared SD card, which seems to me a pretty good solution to the problem, since the card is needed only to start the system, then it can be pulled out and quietly use the computer without it, because all the necessary system and program files are on the flash drive. All settings are saved, the netbook works as expected, there is a Russian layout. Post has been editedMagicien - 06.04.11, 21:23 -------------------- Blackberry Passport (10.3), Sony Xperia PLAY (2.3.7), HP IPAQ hx4700 (WM5), PSPGo, MSI Windpad 110w (Win 8) |
Message#43 06.04.11, 21:23 | |
a guest [offline] Group: Users Messages 5 Check in: 06.04.11 Reputation: 0 | Good evening. I have a similar netbook (From the vendor description: VIA VT8500 processor specifications using the Windows ® CE ARM processor ..... ... ... WinCE 6.0 Management Instant Office Word / Excel / PowerPoint / PDF / Image Viewer Word / Exel Change Interne browser Instant MessagingQQ, MSN, Skype audio Internet Explorer Vedio MP3 / WAV / WMA / AAC / AAC + / WAV / WMA / language voice recorder MP4 / SP / AVI (XviD, H.263, DivX) / Flash / 3GP / H.263WMA / JPEG / GIF; Operating System: Windows CE6.0 languageMulti Language support RUSSIAN IS) In fact it turned out to be: Operating system: Windows CE5.0 RUSSIAN LANGUAGE - not found. After correspondence with the seller, he sent me a script OS CE6.0 I copy the script to SD, insert it, turn it on and it loads the installed WinCE 5.0. If at the time of loading press F1, it requires a password. The question is where to get it? If there are knowledgeable people, please tell me. |
Message#44 06.04.11, 21:56 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1386 Check in: 07.02.08 Blackberry passport Reputation: 160 | Why push F1? In principle, these computers are all alike, from which side is the password required there? Are you doing it right? There is no Russian language anywhere, there is a Russian keyboard layout. serg ///, By the way, how are things going with your battery? My maximum shows 58%. Post has been editedMagicien - 06.04.11, 22:17 -------------------- Blackberry Passport (10.3), Sony Xperia PLAY (2.3.7), HP IPAQ hx4700 (WM5), PSPGo, MSI Windpad 110w (Win 8) |
Message#45 06.04.11, 22:26 | |
a guest [offline] Group: Users Messages 5 Check in: 06.04.11 Reputation: 0 | Magicien Date Today, 22:56 Why push F1? In principle, these computers are all alike, from which side is the password required there? Are you doing it right? When turned on, before the Windows CE screen saver, the inscription: Press F1 key to update system. If you do not press anything, then WinCE 5.0 is loaded, whether the SD is inserted with the script independently or not. And when you press F1, the inscription appears: Please input password: Magicien Date Today, 22:56 There is no Russian language anywhere, there is a Russian keyboard layout. Yes, at least get the Russian layout - otherwise it is an absolutely absolutely useless device. Post has been editedAlexz07 - 06.04.11, 22:54 |
Message#46 06.04.11, 22:36 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1386 Check in: 07.02.08 Blackberry passport Reputation: 160 | Well then you ask your seller, I have never seen anything like this anywhere. Or take another firmware, there are many of them in the internet. At least here:http://tails92.sepwich.com/files/easypc/or here:http://digitalgadgets.com/netbooks/sylvani...k_OS_update.zip If you have NAND and not flash, then feel free to try. Yes, at least get the Russian layout - otherwise it’s an almost completely useless device. I tried to install RussKey NET. You can install this program here:AE Keyboard Mapper -------------------- Blackberry Passport (10.3), Sony Xperia PLAY (2.3.7), HP IPAQ hx4700 (WM5), PSPGo, MSI Windpad 110w (Win 8) |
Message#47 06.04.11, 22:47 | |
a guest [offline] Group: Users Messages 5 Check in: 06.04.11 Reputation: 0 | In fact, the whole trouble, I bought it almost a year ago and the connection with the seller was lost. This link (http://digitalgadgets.com/netbooks/sylvani...k_OS_update.zip)I tried the firmware. Same. On the SD does not respond. AE Keyboard Mapper will try. Thank. |
Message#48 07.04.11, 01:04 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 72 Check in: 22.03.11 Reputation: 0 | Magicien Well, in general, I am pleased with the fact that now I know the netbook company) it is the wandermedia of the second bios on these machines there is no MGU to assure 100 percent that there is nothing we did not kill there just the firmware of this company but not this netbook Posted on 04/07/2011, 01:04: Alexz07 Well, about you, I will say your no, the beech is not loaded from cd, but it is sewn on a cord through a computer somewhere this topic I met the board on no beech should be green, if everything is so that the lace will help you |
Message#49 07.04.11, 10:45 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1386 Check in: 07.02.08 Blackberry passport Reputation: 160 | your beech is not loaded from cd but it is sewn on a cord through a computer somewhere this topic I met the board on no beech should be green in color if that is so the lace to help you This will not help him either, since only WinCE 5.0 rests on that site.http://194.150.201.35/cnmlifestyle/cnmbook...B7SErestore.htmIt turns out the 6.0 version is not for its netbook. Well, then what is wrong in this prosh? I wrote that the files normal_nk, safe_nk, logo are identical to those that were at the time of purchase of the device. So c Kernel already figured out. And the Windows CE system files I'm sure almost the same everywhere. The only thing that comes to mind is that the installer did not mark flash memory as bootable, i.e. didn't make it bootable. Post has been editedMagicien - 07.04.11, 10:46 -------------------- Blackberry Passport (10.3), Sony Xperia PLAY (2.3.7), HP IPAQ hx4700 (WM5), PSPGo, MSI Windpad 110w (Win 8) |
Message#50 07.04.11, 12:13 | |
a guest [offline] Group: Users Messages 5 Check in: 06.04.11 Reputation: 0 | AE Keyboard Mapper installed. But if you set it as default in Program Files, then after turning it off - it turns on from everywhere and, accordingly, it does not start. Therefore, put on the train, the cat. called flash2. After installation, a shortcut is added to the Main menu - Programs - AEKeyMap, but after a reboot, the shortcut disappears from there and you have to start a program from your lips. folders. Labeled a slave. the table is the same picture. Reboot and no shortcut. In general, I stopped at the option - a shortcut to launch to the root of Flash2 and launching the program manually at each session. The rest works great. The icon is present in the tray, the switch buttons are assigned. Magicien /// 07/07/2011,11: 45 This will not help him either, since only WinCE 5.0 rests on that site.http://194.150.201.35/cnmlifestyle/cnmbook...B7SErestore.htmIt turns out the 6.0 version is not for its netbook. Well, if WinCE 6.0 does not exist for me, let WinCE 5.0 remain, the main thing is that the Russian layout has appeared. Thanks for the help. : yes2: But still, I wonder what is the default password and where does it come from? : unsure: Post has been editedAlexz07 - 07.04.11, 12:18 |
Message#51 07.04.11, 12:34 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1386 Check in: 07.02.08 Blackberry passport Reputation: 160 | People, sign off how long you hold the battery. I have about 1.20, while the maximum battery charge shows only 58%. Above does not rise. I wrote it to the seller, and he asked me to transfer 5 dollars and then they will send a new battery. Are they not obliged to replace me for free under warranty? By the way, a full charge takes about 70 minutes. This is normal? Post has been editedMagicien - 07.04.11, 12:35 -------------------- Blackberry Passport (10.3), Sony Xperia PLAY (2.3.7), HP IPAQ hx4700 (WM5), PSPGo, MSI Windpad 110w (Win 8) |
Message#52 07.04.11, 18:13 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 72 Check in: 22.03.11 Reputation: 0 | Magicien Battery works like that for many, many say that this is exactly the case in the firmware since the calibrations do not correspond |
Message#53 07.04.11, 18:35 | |
Visitor [offline] Group: Active users Messages 24 Check in: 02.04.11 Reputation: 0 | How to enable the bridge as advised onhttp://194.150.201.35/cnmlifestyle/cnmbook...B7SErestore.htm. As I understand it, if the bridge is not turned on, then the Active flash drive will not see the flash drive? |
Message#54 07.04.11, 18:40 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1386 Check in: 07.02.08 Blackberry passport Reputation: 160 | It was on the factory firmware, I also decided to reflash because of this. So I do not know if there is any solution to this problem. It's easier to disable the battery driver altogether, but I don’t know how to do it yet. Posted on 04/07/2011, 18:40: After all, everything is shown, what problems? You close two contacts (marked in the picture) and keep them closed until the end of the process. -------------------- Blackberry Passport (10.3), Sony Xperia PLAY (2.3.7), HP IPAQ hx4700 (WM5), PSPGo, MSI Windpad 110w (Win 8) |
Message#55 07.04.11, 18:43 | |
a guest [offline] Group: Users Messages 5 Check in: 06.04.11 Reputation: 0 | I charge up to 100% in 30 minutes, but after turning off the charger it immediately drops to 87%. How many batt. He didn’t specifically measure, but he watched the movie (1h 40m), it was just enough. |
Message#56 07.04.11, 18:51 | |
Visitor [offline] Group: Active users Messages 24 Check in: 02.04.11 Reputation: 0 | The fact of the matter is that everything has been dug up, but there are no such contacts, can someone tell me what thread they have? Chinasses were stingy - the flare was soldered directly to the board and for some reason 5 contacts and not 4. After all, everything is shown, what problems? You close two contacts (marked in the picture) and keep them closed until the end of the process. Post has been editedPC_USER - 23.09.11, 12:19 Reason for editing: Combined two posts into one |
Message#57 07.04.11, 19:05 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1386 Check in: 07.02.08 Blackberry passport Reputation: 160 | If you have a flash memory, but not NAND, then it is better not to neck, then you will not get a hop. And here is what the flash looks like:http: //savagemessiahzine.com/forum/dl/post/902499/STA70212.JPG -------------------- Blackberry Passport (10.3), Sony Xperia PLAY (2.3.7), HP IPAQ hx4700 (WM5), PSPGo, MSI Windpad 110w (Win 8) |
Message#58 07.04.11, 19:22 | |
Visitor [offline] Group: Active users Messages 24 Check in: 02.04.11 Reputation: 0 | |
Message#59 08.04.11, 14:46 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1386 Check in: 07.02.08 Blackberry passport Reputation: 160 | It looks like NAND, you can flash from an SD card. serg ///, After reading various forums, I finally found out why our device does not start without SD. It's all about the ill-fated Android that we tried to install. It was he who replaced the original u-boot with his own, which simply does not support booting from the built-in flash drive. It is enough to at least compare the size: the original u-boot is 511kb, the current one is 237kb. The difference is obvious. Unfortunately, just changing the u-boot will not work. They write on a foreign forum that this can be done only with the help of a programmer, although perhaps there are other ways. But there is also good news. I dug on a foreign forum (http://devio.us/~nextvolume/via_arm/viewtopic.php?id=6&t_id=3&page=4)A script that allows you to run a laptop from an SD card without flashing boot files, thus the boot process has accelerated and now takes no more than 10 seconds. AT) Download the script here:http://www.fileserve.com/file/w8ngWG4 1. Unpack it on an SD card. 2. If you previously changed the names of the files "normal_nk.nb0" and "safe_nk.nb0" among themselves, then rename them back, as it was in the original distribution. 3. Then rename "scriptcmd-normal boot" to "scriptcmd" and copy it to the script folder on the memory card, agreeing to a replacement. Turn on the device and enjoy fast loading. ;) P.S. If you want to run the laptop in safe mode, then we perform the same operation, but only with the "scriptcmd-safe boot", while autorun.exe is better to delete in order to avoid formatting the internal memory of the device. Post has been editedPC_USER - 23.09.11, 12:20 Reason for editing: Combined two posts into one -------------------- Blackberry Passport (10.3), Sony Xperia PLAY (2.3.7), HP IPAQ hx4700 (WM5), PSPGo, MSI Windpad 110w (Win 8) |
Message#60 08.04.11, 21:42 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 72 Check in: 22.03.11 Reputation: 0 | Magicien just today I read on the cover of the fact that the android spoils the file now I drip how to restore but there is nothing useful |
Message#61 10.04.11, 08:06 | |
Visitor [offline] Group: Active users Messages 24 Check in: 02.04.11 Reputation: 0 | Magicien, explain how to make the firmware? There is a script, there are 4 versions of the upgrade 1.27, 1.62, 1.82, 1.86, as I understood, all this should be loaded on SD - then start from it. Question: how to make the laptop boot from SD? Magicien, everything turned out, he himself realized, it turns out the laptop itself is loaded by default from SD, I flashed sylvania_smartbook_OS_update (English), everything worked. Now there is a question about Russification. I will look for. for the tips great respect! Magicien, There is WinCE6-ModRUS-Reliz-1_0 but at startup it gives an error and hangs. Maybe for Sylvania there is where the thread crack? I dig in the Internet - display on WinCE6-ModRUS-Reliz-1_0. Post has been editedPC_USER - 23.09.11, 12:21 Reason for editing: Combined three posts into one |
mobile version | Now: 04/29/19 1:02 AM |