ZTE X850 Racer - Firmware (OS 2.3)
ZTE X850 Racer - Firmware (OS 2.3)
MTS 916
Description | Firmware 2.1 | Firmware 2.2 | Development of kernel 2.6.32 / 35 | FAQ on the MTS 916 | MTS 916 Owners Club | Online firmware designer, android-builder.ru
Now our firmware will be inOnline constructor
All that is not connected with the core, I have our own problems here and so on ...
ATTENTION: When installing this firmware (which you put on your own risk), you will stop the guarantee of the store and MTC as a whole.
Stall: Firmware collected from source code CM7.2.0
Beta2 12/15/2011 + patch for installing firmware gene1 on phones gene2 + recovery "CWM"
Beta1 11/23/2011
Post has been editedAUDIMEN - 01.07.20, 00:15
MTS 916Description | Firmware 2.1 | Firmware 2.2 | Development of kernel 2.6.32 / 35 | FAQ on the MTS 916 | MTS 916 Owners Club | Online firmware designer, android-builder.ru
Now our firmware will be inOnline constructor
All that is not connected with the core, I have our own problems here and so on ...
ATTENTION: When installing this firmware (which you put on your own risk), you will stop the guarantee of the store and MTC as a whole.
Stall: Firmware collected from source code CM7.2.0
Beta2 12/15/2011 + patch for installing firmware gene1 on phones gene2 + recovery "CWM"
Beta1 11/23/2011
What is and what will happen
New CyanogenMod 7.2.0 Beta Firmware (Android 2.3.7)
Fixed:
1) Alarm clock
2) Phone.apk does not hang in the background
3) missing LDPI resources
A distinctive feature of this firmware is that it is collected from the source code, and is not a binary port from the firmware of other models!
This test version is allowed for defamations and errors missing when testing.
List of improvements:
1) Corrective calling! (Changes are made to Phone.apk, correcting the problem with the completion of the call in the absence of the approximation sensor)
2) Illumination of the reset and call buttons
3) vibrootkalklik softcaps (changes to Libui.so code)
4) Device setup item where you can control charging via USB and multitouch emulation
5) improved accelerometer operation (updated AKMD2 and SENSORS.MoonCake.So)
6) Fixed Standard Keyboard
7) Distribution on WiFi
TODO:
1) Add TSLIB
2) fix the work of the radio
3) Softcopes through VirtalKeys (almost already solved)
4) Add some LDPI resources in framework
Fixed:
1) Alarm clock
2) Phone.apk does not hang in the background
3) missing LDPI resources
A distinctive feature of this firmware is that it is collected from the source code, and is not a binary port from the firmware of other models!
This test version is allowed for defamations and errors missing when testing.
List of improvements:
1) Corrective calling! (Changes are made to Phone.apk, correcting the problem with the completion of the call in the absence of the approximation sensor)
2) Illumination of the reset and call buttons
3) vibrootkalklik softcaps (changes to Libui.so code)
4) Device setup item where you can control charging via USB and multitouch emulation
5) improved accelerometer operation (updated AKMD2 and SENSORS.MoonCake.So)
6) Fixed Standard Keyboard
7) Distribution on WiFi
TODO:
1) Add TSLIB
2) fix the work of the radio
3) Softcopes through VirtalKeys (almost already solved)
4) Add some LDPI resources in framework
Installation method
Firmware Installation Requirements:
- Custom Recovery CLOCKWORKMOD
- Memory card with two sections
Installation Recovery
Video instruction:
- Custom Recovery CLOCKWORKMOD
- Memory card with two sections
Installation Recovery
1. Download the archive:Recovery 3.0.1.4
2. Unpack the archive with recovery
3. Turn off the phone.
4. Connect the cable to the phone.
4.1 If the B02 Firmware: Clear the volume up and turn on the phone
4.2 If the B04 firmware: Clear the call + reset + volume down and turn the phone
4.3 The computer should start searching for a new device. Drivers lie in the recovery catalog.
5. From the Recovery directory, you launch the Install-Recovery-Windows file. Bat waiting for execution.
6. If no errors have no new recovery set.
7. Turn off the cable and reboot the phone.
Sometimes you need to connect the cable to the computer from the back side of the system unit.
2. Unpack the archive with recovery
3. Turn off the phone.
4. Connect the cable to the phone.
4.1 If the B02 Firmware: Clear the volume up and turn on the phone
4.2 If the B04 firmware: Clear the call + reset + volume down and turn the phone
4.3 The computer should start searching for a new device. Drivers lie in the recovery catalog.
5. From the Recovery directory, you launch the Install-Recovery-Windows file. Bat waiting for execution.
6. If no errors have no new recovery set.
7. Turn off the cable and reboot the phone.
Sometimes you need to connect the cable to the computer from the back side of the system unit.
Installing firmware:
Stage 1
We prepare a memory card.
Create partition EXT3 on the map:
1. Loading in Recovery
2. Go Advanced =>Partition SD Card =>Select the desired size.
Stage 2
1. Download the firmware from the header
2. Copy the downloaded firmware in the root of the flash card (unpacking the zip archive is not necessary !!!)
3. Turn off the phone
4. Turn on the phone with a squeezed sound key down. - Run Recovery
5. We make formatting and reset to factory settings (Wipe Data / Factory Reset)
6. Select on the menu: Install Zip from SDC =>choose zip from sdcard =>Select the copied firmware
The update will begin. Then if you want to reset the phone - leave it without personal information. Making Wipe:
In the root of the RECOVERY menu =>Wipe Data / Factory and Wipe Cache Partition.
7. After completing the update in the Recovery menu, select Reboot.
We prepare a memory card.
Create partition EXT3 on the map:
1. Loading in Recovery
2. Go Advanced =>Partition SD Card =>Select the desired size.
Stage 2
1. Download the firmware from the header
2. Copy the downloaded firmware in the root of the flash card (unpacking the zip archive is not necessary !!!)
3. Turn off the phone
4. Turn on the phone with a squeezed sound key down. - Run Recovery
5. We make formatting and reset to factory settings (Wipe Data / Factory Reset)
6. Select on the menu: Install Zip from SDC =>choose zip from sdcard =>Select the copied firmware
The update will begin. Then if you want to reset the phone - leave it without personal information. Making Wipe:
In the root of the RECOVERY menu =>Wipe Data / Factory and Wipe Cache Partition.
7. After completing the update in the Recovery menu, select Reboot.
Video instruction:
Additional files
The topic for ADW Lancher, changes in the settings of Lancher himself
Sergiopoverony.adw.theme.apk.
Sergiopoverony.adw.theme.apk.(578.09 KB)
Sp_theme.black.apk.(1.78 MB)
Sp_theme.white.apk.(1.6 MB)
Sergiopoverony.adw.theme.apk.
Sergiopoverony.adw.theme.apk.(578.09 KB)Sp_theme.black.apk.(1.78 MB)Sp_theme.white.apk.(1.6 MB)Post has been editedAUDIMEN - 01.07.20, 00:15
Reason for editing: beta2 12/15/2011
What would earn a googloactant to be sewed to googlovsk applications. On Modako theme is with them through the recovery
So I put it .. In general, the rules ... the video is still not working, probably at the camera because of the same problem
Posted on 03/13/2011, 14:44:
works for me
Posted on 03/13/2011, 14:44:
NYCDEVILLE @ 03/12/2011, 14:39
people unsubscribe from someone started, I tried, on the screensaver CyanogenMod did not go
works for me
NYCDEVILLE @ 03/13/2011, 16:39
people unsubscribe from someone started, I tried, on the screensaver CyanogenMod did not go
No, there is a chiogen screensaver
LordCrash @ 03/13/2011, 14:44
works for me
What is the version of the recovery and the EXT2 card?
Desire_soul @ 03/13/2011, 14:46
No, there is a chiogen screensaver
But I have during the start of the phone
Post has been editednycdeville - 13.03.11, 14:51
Desire_soul @ 03/13/2011, 14:46
No, there is a chiogen screensaver
In this version there is
NYCDEVILLE @ 03/13/2011, 14:47
What is the version of the recovery and the EXT2 card?
Large-font recovery, yes card ext2 /
Posted on 03/13/2011, 14:56:
Lam1q @ 03/13/2011, 12:52
Does not work: 1) Gallery
and I earned
LordCrash @ 03/13/2011, 14:56
Large font recovery
throw off pliz, I have the latest version so, but for the sake of interest
So no one answered.
And yet there is or not JIT in this version?
And how does version 2.3 differ from version 2.2?
And yet there is or not JIT in this version?
And how does version 2.3 differ from version 2.2?
boriskinch,
It was a different one ... That's it, I don't remember Toli itself after rebooting the phone ... Toli wipe did ... so forgotten ...
It was a different one ... That's it, I don't remember Toli itself after rebooting the phone ... Toli wipe did ... so forgotten ...
Boriskinch @ 03/13/2011, 15:00
I have something every second errors come out setup wizard and com.google.gapps and does not go out
Wipe did?
By the way, the gallery works.
Hmm .. I am ... I apologize
Post has been editedLordcrash - 13.03.11, 15:13
NYCDEVILLE @ 03/13/2011, 16:39
people unsubscribe from someone started, I tried, on the screensaver CyanogenMod did not go
I also did not go :(
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement