Instructions в„–3: We sew custom firmware using the new rekoveri for that would establish "MoDaCo Custom ROM for the LG Optimus 2X" follow these steps:
I remind you that the data from the internal memory card after the firmware will not be lost.
Attention! Do not attempt to flash the firmware from another phone just because you like it! Cyanogen firmware, HTC, Nexus, and others are not suitable for 2X! 1) Download the latest firmware from Paul:
Fr12: MoDaCo Custom ROM for the LG Optimus 2X(
Fr12-update-modacocustomrom-2x-kitchen-unsigned.zip - 237 Meg) (or
kitchens (Need registration fee ~ $ 9 a year))
2) Throws a zip file to the root of the external SDCard: / sdcard / _ExternalSD (internal flash drive rekoveri not see)!
3) Disable a data cable and reboot the device into Recovery mode - turn off and hold the Volume Down button, press book. feeding
and holding both buttons until the text inscriptions Android
4) Make a backup of the previous system with all settings - "
backup and restore " - "
Backup ".
Backup copies made using rekoveri are stored in the folder / sdcard / _ExternalSD / clockworkmod / backup / - each backup weighs about 400meg.
5) if all previous settings to be deleted is doing Wipe ( "
wipe data / factory reset " - "
Yes - delete all user data ")
6) if it is necessary to save the settings do not choose Wipe
7) sews custom firmware - "
install zip from sdcard " - "
choose zip from sdcard "And select the root folder or in your zip firmware and wait for the process to complete. During the installation of all the internal partitions will be automatically converted to the ext4 file system.
8) back to the main menu (+++ Go Back +++) and select "
reboot system now "
Finish (maximum performance will be after the 2nd load when all systems are configured)
P.S.
To install the new firmware is recommended instead of the replacement of the radio module to the new version (Baseband 1035.21_20110315) about this in the next post.
Attention! To do a factory reset (wipe) is required when upgrading from version to version FR3 longer Fr3 (Fr4-Fr8 ...)
When upgrading from Fr4 above do not necessarily reset. Post has been editedibog - 02.05.11, 14:06