HTC Leo - Flashing (Archive) | HTC HD2 / HTC T8585



Rep: (2834)
The material presented on the page is unofficial (with the exception of official firmware), in the event of unsuccessful firmware or destruction of the device, the author of the software and the Administration do not bear responsibility for the resource! All actions are performed at your own risk!

Flashing HTC HD2
HTC Leo, HTC T8585
General : Description | Discussion пїЅ | FAQ пїЅ | Purchase пїЅ l Accessories пїЅ | Owner communication пїЅ | Marriage пїЅ | GPS пїЅ | Modification and refinement of the OEM software HTC пїЅ | Adaptation of OEM software for HTC пїЅ | Improved sound quality and volume пїЅ | Discussion on energy consumption пїЅ
Firmware : General flashing questions пїЅ | Discussion of the original firmware пїЅ | Base firmware HTC HD2 пїЅ | HTC Leo - Firmware radio module пїЅ |
HTC Leo (HD2) - Android OS пїЅ | WP7 for HD2 пїЅ | Learning to build firmware пїЅ

Re-flashing of the American HTC HD2 from T-Mobile

The results of our surveys can be found here.

Additional tools for flashing:
Attached fileHSPL2_RUN.rar (916.27 KB)
Early version of HSPL frombepe and Cotulla , only for European devices.
Attached fileHSPL3_PKG.rar(693.21 KB)
frombepe and Cotulla , it is intended both for European phones, and for American from T-Mobile.
HARD SPL2 by Cotulla
Read carefully before installation!

1) To install this HSPL on your device must be SPL 1.42.0000 (only concerns HSPL2 ).
Otherwise the installation will fail!
To check the SPL version, hold the volume down button and reset.
If you have an older SPL version, flash the official ROM from your device.

2) Features
- Security level = 0, you can see all the commands available in the device (for developers).
- This HSPL will not be overwritten when flashing the whole NBH with SPL through RUU.
- There is no verification of the NBH file signatures, so you can flash the device with non-signed firmware, that is, custom.

3) Warranty issues
Installing HSPL may void the warranty.
If you send the device to a service center, make sure you remove HSPL!

4) Delete
The only way to remove HSPL is to flash the original SPL from the memory card.
- Take any "RUU_signed.nbh" from the original firmware.
- Rename it to "leoimg.nbh"
- Flash through the bootloader.

5) All
This product can be used freely, but at your own risk. We do not take
liable for any conflicts, failures, or damages caused by this procedure.
We do not give any guarantees!

Crack for HD2 WWE firmware the authorsZeratyl and XAOC747
Rom Update Utility Flasher, interface language ENG
Task29 Tool for full formatting of the device
Program to change the paging (PP) in the firmware
How to flash Hard SPL
How to flash ROM
FAQ on firmware
List of errors during flashing
How to calibrate the battery

Mini faq on flashing:
What does the flashing process look like?


How to return the nativeSPL if previously been flashed Hspl? (before going to the SC for example)


To find out what it costsSPL or HSPL need to enter bootloader (mattress). How to enter and logout mattress?


How to flash your (custom) firmware without installing HSPL, and "using SSPL"?


How to flash (reflash) your kmk HTC HD2?


How to flash from a memory card?


Do not forget that:
Nobody bears responsibility for your actions !!!
Thank you for this FAQ.PITONGAD


When installing HSPL, choose 2.08 HSPL, not 2.08.0000.


Instructions for installing the latest official firmware here.


New utility for firmware 3 in 1, read more here.


Post has been editedSmartecs - 24.01.11, 00:06



Rep: (124)
gredmy @ 11.12.2010, 12:06*
I do not like to argue, but what do you have to do it and how to explain. And here is a video that makes it look Task29

Ok, let facts.
1. The author himself states that HSPL needs.
2. after performing task29, there will be no firmware on the device, i.e. beyond the white screen we are loading. You yourself write:
gredmy @ 10.12.2010, 19:22*
Then connect the animal or through Active sinc Center VM devices and run LBAS.

Is this not enough?



Rep: (24)
Somewhere in half a year ago, I already asked this question. Again.
Need Russian firmware, the latest (non-beta) version of firewood and programs, unadorned, without any additional software and support for 576 frames.
Roughly speaking, as the off, just with everything renewed.



Rep: (34)
Constantly faced with a glitch that inbound or outbound callers can not hear me, but I hear them, and is that the internet connection is established and the transfer of Mr. goes, how to deal with this? This happens on all firmware versions, I put the radio 2.14 and 2.15 there is no difference, there is a glitch, but it is a variable, that is not. Help


Full version    

Help     rules

Time is now: 22/02/20, 16:54