Creating the image of your new car:

Take the filewisky.sys We connect the "reader" to the computer and put the wisky.sys file into its internal memory. We disconnect the "reader" from the computer and reconnect it. The computer will detect two more instead of the usual two disks. We need containing 5 folders and files.
Run the WinImage program:
1. In the 'Disk' menu, select 'Use disk' (the drive letter of our device)
2. Now 'Disk' - 'Read disk', choose the name of the image file — specify not only the name but also change the destination (by default it tries to save in the same disk it reads).
3. The extension of the created image rename toimg , then it will be easier to find it in the flasher.
Image is ready.
4. Delete the wisky.sys file
4. Archive the resulting image, put it on the Internet and share the link with the forum users;).
Can seevideo this process (48.36 MB)

How to flash the machine:

Take the flash driverRK28DM_Setup.exe (678.44 KB) or from the company "prestigio" version 1.27 (Also used by the company "Delstar" version 1.22).
Under Windows 7, we use the flash driver from prestige version 1.27, thanks for talkingOrisava .
1. In the line "New firmware informaton" click the button"..." and choose the image we need.
2. If we are stitching for the first time, a new device will be detected. Specify the rk28usb driver (in the Driver folder of the installed flash driver, we find it under your OS) ... maybe it will give an error in recognizing the device without scaring! disconnect the reader from the USB lanyard and connect again. The machine extinguishes the screen and goes into firmware mode.
3. Button"Update" Run the firmware process. In the window of the flasher, squares will start running. We are waiting for the end. The machine itself will reboot.
4. And press the buttonExit Firmware complete.

How to dump your firmware:

thankbig3214 lies here and read a few posts of it below ...
For those who do not have time to follow the link, but there is a desire to share with the forum users a new firmware;) briefly bring here. Take the filewisky.sys or create an empty text file and rename it. We connect the "reader" to the computer and put the wisky.sys file into the internal memory. We disconnect the "reader" from the computer and reconnect it. The computer will detect two more instead of the usual two disks. We need containing 5 folders and files. Fully copy the contents of this disc to your computer. This will be the necessary dump. Now you can delete the wisky.sys file from the disk where we put it and disable the "reader" from the computer. Archive the resulting dump, put it on the Internet and share the link with us;). How to flash a new firmware in the book read in the section "How to flash a device".

How to flash a device:

1. If we have an image of the desired firmware, then go to step 2. If we have a dump of the firmware we need, then we continue to read. Now we need to make an image of it. For this we need the image of another firmware and programUltraISOWinImageor another for working with images, as well as a kit from the siteTeclastcontaining such an image, flash driver and driver. Open the downloaded Teklastovsky image and replace ALL of its contents with the fact that we need the dump. Save under a different name. Tip, use short (up to 8 characters) file names that do not contain Russian letters. Perhaps this is paranoia, but saved, as you know, God saves.
2. The image with the firmware we need will be flashed into the "reader". It will be required (if the textbook bundle was downloaded, the flash driver is in the utilites folder, but first we change the language string to English in the setting.ini file to LANGUAGE = English, otherwise the squares will be)flash driver , for him we say a special thank you al_exus y

Run the flash driver.
Find the line in the window that appearsImage path and the button on it ... We select the img-file we need.
Push buttonSwitch , if we are flashing for the first time, then a new device will be detected, we will show him the rk28usb driver for our OS ... in the driver folder they have if you download the entire kit from the Chinese site ( al_exus and they are in the xp folder) ... maybe it will give an error in appointing the device, not scaring! disconnect the reader from the USB lanyard and connect again. The machine extinguishes the screen and goes into firmware mode.
ButtonUpgrade Run the firmware process. Information about the flashing process will appear in the flasher’s large window. We are waiting for the end. The machine itself will reboot. And press the button Exit

Please read the firmware tipsal_exus And, they helped me a lot, and based on his post and it is written how to flash

Oaxis W950 Ebook Reader
SOVOS 5 "E-Reader Plus SVEBK5
INTREEO EBR-05L
Delstar OpenBook E-READER
SCOUT EbookReader
RY650 5 "e-book reader
KIWIE FIVE-BOOK
STASH TFT E-Book Reader
TECLAST TL-K5

With your permission, I will give you a small review of the firmware that I drove over the past days for our HD.BOOK
I use the book for 90% to read books in fb2 format, sometimes I listen to audio books and watch TV shows.
The first firmware wasHD.BOOK version ID: 1.0.0 date 2010/09/14 It differs from 1.0.2 screen brightness. At first, when reading, the brightness of the backlight itself is the lowest of all the firmwares viewed ... hmm, and TECLAST will be darker than zero, even though you take a flash at night. When reading in the dark it is very convenient, but during the day: (. It was not right - during the day it is very comfortable to read in the inverse mode, at night - in the usual one, for lack of a special mode.

FirmwareHD.BOOK version ID: 1.0.2 date 2010/10/18
thankbig3214 Not sure that I used this option = (maybe by this thank drueed
Font type selection is not.
It is possible to select the font size - 5 values, the page of lines includes: 34, 27, 23, 20, 17. With 20 lines - 30 characters per line.
Transfers - there is.
Inversion (light letters on a dark background) - is.
Adjusting the brightness of the screen when reading - no. When working in the menu, there are 5 gradations (it seems that this adjustment affects the reading mode).
When turned on - opens the last open book at the place where it was turned off.
Audio books - you can select the desired folder and listen to files in a row, pauses it.
Video - pause remembers, rewind works.

FirmwareHD.BOOK version ID: 1.0.3 date 2010/11/29
thankvladbravo for this dump (you need to make another image of it, read the information on how to make a dump above, I did it or use it firmware laid out bext1 )
The choice of font type is.
The font is standard, the font size is 5 sizes, the page of lines includes: 34, 27, 23, 20, 17. With 20 lines - 30 characters per line.
TrueType font, font size - 5 sizes, the page of lines includes: 38, 29, 25, 21, 17. With 21 lines - 30 characters per line.
Transfers - there is.
Inversion (light letters on a dark background) - no. But there is a choice of background color (yellow, white, light pink, gray) and font color (black, red, green, blue, brown). Colors - bright "tear out eyes".
Adjusting the screen brightness when reading - 5 gradations.
When turned on - opens the last open book at the place where it was turned off.
Audio books - you can select the desired folder and listen to files in a row, pauses it.
Video - pause remembers, rewind works.
DOC - opens without pictures.
In the menu - the selected item is highlighted not only in color but also in a tick, conveniently.

FirmwareHD.BOOK version ID: 1.0.4 date 2010/12/21
thankgabz for a firmware dump (you need to make another image of it, read the information on how to make a dump above, I did it or use it firmware for TECLAST flasher or firmware for Prestigio flasher thanks 11111000 )
Differences from 1.0.3:
- can "look into" zip archives (except how to look at the archived files more than anything else is not suitable);
- able to open java books with Unicode text (I did not find libraries with such books, and I didn’t look for it). You can make an archive yourself with books and it will work, we read page 5;
- not correctly in the reader shows the status of the battery.

FirmwareExplay HD.BOOK ID: 1.0.5 date 2011/02/25
Kindly providedBultamino option "no carry" . Returned the inversion :)
The most important difference from firmware 1.0.4 is that the set of colors has been changed in the choice of background color (yellow, white, light pink, gray,the black ), font color (black, red, green, blue, brown, white ). To the optimal night mode, it remains only to make a green font darker.


FirmwareTeclast TL-K5 version ID: 2.0.0 date 2010/12/06
used russifiedal_exus th
The choice of font type is.
The font is standard, font size - 3 sizes, the page of lines includes: 34, 23, 17. With 23 lines - 30-32 characters per line.
TrueType font, font size - 3 sizes, the page of lines includes: 38, 25, 19.
Carries - no (stretches in width).
Inversion (light letters on a dark background) - no. But there is a choice of background color (yellow, white, light pink, gray) and font color (black, red, green, dark blue, brown). Colors - bright "tear out eyes".
Adjusting the screen brightness when reading - 5 gradations.
When enabled, opens the menu. (There is a choice in the menu that "menu" or "book" - but does not work if a memory card is inserted ... thanks for the informationKasitro )
Audio books - you can select the desired folder and listen to files in a row, pauses it.
Video - pause remembers, rewind works. By keym A menu is displayed in which you can select an audio track, subtitles and go to the right place in the video file.
DOC - opens without pictures.
PDF - in zoom mode, you can "crawl" on the sheet in jumps.
Radio is missing.
Key lock - there is.
Screen blanking - there is.
If there was an inversion, I would stop at this firmware for the last two points. It is also very fast (subjectively loaded quickly and goes faster in the menu).
If there are a large number of files in a folder, you cannot quickly go to another page with the joystick left-right = (But you can go by using the side keys. =)

FirmwareDelstar OpenBook version ID: 1.0.2
Font type selection is not.
There is a possibility to select the font size - 3 values; the page of lines includes: 39, 27, 21. With 27 lines - 33 characters per line.
Transfers - there is.
Inversion (light letters on a dark background) - is.
Adjusting the brightness of the screen when reading - no. When working in the menu, there are 5 gradations (it seems that this adjustment affects the reading mode).
When enabled, opens the menu.
Audio books - not tested.
Video - there is no such menu item.
fb2 - opens without images, without footnotes. Font style - one (no bold, italics and bold italics).
PDF - in zoom mode, you can "crawl" on the sheet in jumps.
Radio - there is no such menu item.
The fastest (subjectively loaded faster and goes quickly in the menu). And the screen saver when turned on is in harmony with the menu (black text on a yellow background).

Symptom Description: black screen, "typewriter" does not respond to key presses for power and reset; when connected to a computer, there is no reaction, flash drivers do not detect the device.
Diagnosis: brick
Treatment:
Perhaps you are still lucky and do not have to disassemble the machine. Run the flasher, hold down the buttonm and connect the USB cable ... see the long-awaited inscription in the flasher RK28Device or RockUSBDevice (i.e., the flasher saw the machine). Stitching as usual. Thanks for these suggestions. zukkin and Bultamino .

You are not lucky - and manipulation of the buttons did not help. We'll have to pick iron.

1. we disassemble the machine (two screws from the bottom end, with a thin and hard object (with a fingernail) we divide the body along the seam into two halves);
   
   
2. We launch the flash driver, I use Teklastovsky;
   
3. find the SAMSUNG K9GAG08U0D microcircuit and the key on it, counting the 29-30-31-32 leg (I / O0, I / O1, I / O2, I / O3 - this is 5-8 feet from the bottom and on the opposite side of the key) and locking them (fine screwdriver went well);
   
   
4. connect the USB connector;
   
5. an inscription about the device found appears in the flasher;
   
6. release the installed jumper;
   
7. stitching as usual.