[X]Assistant

[komok1965]

Hello.
2motorola13, google, here.

Hello.Changed on the laptop HDD, began to install W7. Next began the following -
1. Windows loading files. With a loading bar at the bottom.
2. Sterting Windows
3. Asks what language. Well, Russian, of course.
3. Next ->Install.
4. Start the installation.
5. I accept the conditions ... Further
6. Update or complete installation. Complete
7. Select a partition to install W - Disk 0 Section 1 I make a "create" - Writes that it is primary.
And at this time below it is written with an exclamation mark that it is impossible to install Windows 7 on Disk 0, section 1 - and writes in details that installation on this disk is impossible. Perhaps the hardware of this computer does not support booting from this disc. Make sure that the disk controller is turned on in the computer BIOS menu.
So that is all. Trying to format - it seems to warn that the data they say may be erased. But then the same picture with an exclamation point ...
The disk is visible in the BIOS. Winda also sees it, but does not want to format it.
How to be, tell me.

Like did -disabled AHCI in BIOS.It began to be put. Already installed - everything works.

Successes.

[razum86]

Can I put 4 gigabytes of RAM on it?

[pasha_550]

razum86 @ 11/06/2012, 12:53

Can I put 4 gigabytes of RAM on it?

IntelВ® Atom в„ў Processor N450 (512K Cache, 1.66 GHz)- only 2GB.
Still:
http://www.sammynetbook.com/forum/threads/...210-RAM-upgrade
http://www.sammynetbook.com/forum/threads/12560-Ram-for-N210

[kreators]

Hello. Is it possible to use our netbook as a Wi-Fi access point?
To connect a modem to a netbook, make an access point and take an Internet on your phone?
Thank you

[Relax_32]

Hello! Helping with the problem I decided to put Androy on our miracle, this despite the fact that everything in it is working and Windows and Phoenix, in general when installing the androyd I unintentionally deleted a apparently important section. Generally writes now the following Entering into rescue mode ... grub rescue_ I have been restoring windows procedure but the message is the same

[SoulSl]

Is it possible to change the percentage for it?

[art555777]

I welcome the owners of this device.
Dear, I got this netbook without a hitch (for free), but unfortunately without a matrix and without a native screw ...

Windu installed on an external USB screw, Windows loads (after booting, when pressing buttons on the keyboard, there is a characteristic Windows sound "blu-m-m"), but for lack of a suitable video driver in this "Windows" (Win_10x86), the external monitor does not show a picture .
Strangely enough, but the video adapters from Intel_HD do not see the external monitor until you install the video card driver, found it out by connecting a similar netbook (Samsung NC10) without a video driver.
Those. until you installed the video card driver - the external monitor was not connected.

Actually a request - if someone can - fillyou are welcomeOn a Yandex disk (or torrent), the image of Windows from this netbook with installed drivers.
Available in TIB or ISO format.
I would like to connect an external monitor to a netbook, I just don’t see any other way out.

Thanks for the help!

Post has been editedart555777 - 16.01.17, 21:31

[art555777]

art555777 @ 16.01.17, 21:25

Windu installed on an external USB screw, Windows loads (after booting, when pressing buttons on the keyboard, there is a characteristic Windows sound "blu-m-m"), but for lack of a suitable video driver in this "Windows" (Win_10x86), the external monitor does not show a picture .
Strangely enough, but the video adapters from Intel_HD do not see the external monitor until you install the video card driver, found it out by connecting a similar netbook (Samsung NC10) without a video driver.
Those. until you installed the video card driver - the external monitor was not connected.

Maybe someone will come in handy, because I have nowhere and in the net have not found a solution to a similar problem, I dope myself and did ...

So, installing a system without a monitor:
1. Download Win-10 image (home for one language) from Microsoft
1.Integrated the Intel HD-3150 graphics card driver to the windows distribution with the help of the "NTLite" program
2.Unfolded (installed) the image of the distribution kit with the integrated firewood of the video card on the external screw on another computer using the "WinToUSB" program (it turned out a universal Windows untethered from hardware, i.e. for any computer)
3. The first launch of deployed Windows did on another computer, because there you need to enter the "user name" in the settings, and without a monitor it is natural not to do it.
4. Installed a screw on our patient, loaded it, waited a little for fidelity - overloaded (the driver is installed automatically, after which it is necessary to overload the system)
Everything is working!

References:
Windows -

LINK

https: //www.microsoft ... 9497-a04303f34986=True

WinToUSB -

LINK

https://nnmclub.to/forum/viewtopic.php?t=1085241

NTLite -

LINK

http://softikbox.com/v…v-windows-7-20751.html

[kiberator]

How does a netbook behave on Windows 10, autonomy, speed, screen resolution?

[kiberator]

Tell me, what version of Linux can I put on it so that it is buggy?

[usf80]

The keyboard on the netbook died (Samsung NP-N210), was sent in for repair, the keyboard was replaced with a new one there - it died the next day. Money back. We decided to replace ourselves. Bought on Ali, set - died after 1 hour. Moreover, one scenario always dies: first several buttons do not work, then more and more (the order of the buttons die is always different). The problem manifests itself everywhere: in BIOS, DOS, Windows XP.
What could be the problem?

[bepulsoft]

Hello, somehow the keyboard has stopped working. The only thing that I did was enable the guest account.
After reboot works. Logged out and again The keyboard does not work to type a password. After hibernation, too, continues its work.
What could be the problem. (ativ book 2 Samsung e270 laptop)

Post has been editedbepulsoft - 13.08.18, 08:47

Reason for editing: Model