Connectify (PC)
Version: 2.1.0.16429Homepage: http://www.connectify.me Only for Windows 7 and higher After a long ordeal picked up on your computer Wi-Fi, ie, now my Android does not eat off of money on GSM-ISP traffic and quietly eats himself Wi-Fi to my computer. How to do it? I decided to describe, because the fragmented infa on the internet is horrible, if you undertake to do. The first thing to determine the module Wi-Fi, which you have installed (about individual access points here it would not be carried out!) On your computer. Through the properties of the equipment get in the "Network adapters" or references Wireless Wlan and remember the name. Then go to the example here Supporting Virtual Wi-Fi card.
Attention!If you can not find in this list of your network card, then you can no longer read. Your computer can not be a point of access for other devices! P.S. Exceptions are possible, so first of all try to update the drivers, if your computer was purchased before 2008. In any case, make sure to update the drivers, even if your card is in the list of supported.
List of card additions:
dell wireless 1395 wlan mini-card
802.11bg Mini Card Wireless Adapter
If a card was found (the list is periodically updated, because the producers still some maps are updated to support the Virtual Wi-Fi), then read on.
To begin to understand what this damn thing the Virtual Wi-Fi, I will add a little bit of information, gleaned on the Internet. If you simply, the technology allows you to connect to the physical device (supporting the technology itself), virtual ports, with which there is a distribution of the Internet, or other information streams. Such ports in the Microsoft's technology can be up to 100, in Intel (supported only likely Intel) - 8.
Who are interested in the details - you can check out the original source of the article about the Virtual Wi-Fi on the site
Intel. (in Russian).
Move on. Of course, you can use the command line for Virtual Access Point connection, but better to call for help utility
Connectify . About her sobstenno and we'll talk more.
In principle, the utility is placed very easily, but there are several problems to be faced. If you do not want to sit on the setting for several days, then just I suggest to read these instructions carefully:
1. First download the latest version of the program via the link.
2. After installing the latest software will ask to give some answers that need while simply answering in the affirmative, not bothered in the settings. Even requested a password can be supplied from the lantern, because then it is possible to change the elementary. Password at least 8 characters, but the program will give you and do not put the wrong. On offer to run the program after installation are responsible utverditelno.Na just in case, for paragraph 3 remember the name of the connection that is created, then to set it up
3. Let us further network. The first and most disgusting problem lies in the adapter Virtual Wi-Fi, which you get after installing the program (On the Control Panel \ Network and Internet \ Network Management and Sharing Center \ Changing the adapter greyish bottom is written, Microsoft Virtual Wi-Fi Adapter or the name of the connection that created the Connectify software). We find this device - the system typically creates it as a wireless connection 2, but may be possible - and open the driver, where in the "Power Management", always remove the checkbox to enable the system to turn off the device to save power. Otherwise you get constantly "falling" connection. Do not miss it!
P.S. Do not disable the IPv6 protocol - it is actively used in the work!
4. Next, to configure the network as long as nothing else is not touched except for internet connection - ADSL, Local Network, or any other, through which you connect to the Internet. On the "Properties" open tab "Access" and there put the check authorizing general access to this connection to other network users. In the drop-down box we find our virtual connection (usually the system creates it as a wireless connection 2), and then open the "Settings" button, and put the check there for services for which you want to access. Typically the core is HTTP, HTTPS, FTP, SMTP, UDP, POP3, but you can at least all be resolved.
Attention! Here you are waiting for the problem number three! Carefully read this site and do not say I did not warn you. When you try to write new settings general internet connection may suddenly pop out error, and Windows (Hey bastard Bill!) Writes that the error unknown !!! What do you think: how can you diagnose an unknown error? Here I am about the same. However, there were good people and suggested where to dig. It turned out that it intrigues brandmauzery Windows itself that is doubly surprising given about an unknown error! So, fix the following - it is necessary or just click on the "Control Panel \ All Control Panel Items \ Windows Firewall" click "Use Default Settings", or disable it to edrene hair dryer. Sense of it all the same way - only eat off the resources. After this error message is no longer climbs.
P.S. After the network configuration is better to restart the computer.
5. Now, finally, we can pay attention to the installed program Connectify. It hangs in the tray under the arrow. Click on its image with the Wi-Fi icon and open the operating window. If you have configured the usual configuration, in this window you will see only a password field and a drop-down list to choose to connect to the Internet. Here you need to choose the connection where you have distributed online (see point 4). Password 8 characters, but the program and will not put the other. After that press the button "Start Hotspot" and start to enjoy our wonderful Access Point on our machine.
Here it was possible to stop, if not ... Agnitum Outpost. This respected by all firewall installed to protect the network at a given moment of time and protects us from the Access Point. More precisely, he does not understand this connection! Therefore, if you have something does not matter, first of all look for it in a firewall - Outpost, Kasperskiy, Norton, etc. Another Trouble is that for example I was not able to pick up another computer - only the phone, but I will try to work on it again.
P.S. As an intermediate solution Outpost - first disable the firewall, and then run the AP, and then turn back to the Outpost. Works.
P.P.S. Before you throw spears of idle connection - try restarting your computer and the body. Sometimes it helps.
And this manual is suitable not only for Android, but also for all the devices that have Wi-Fi on board In view of the numerous repetitive queries specify - Internet appears in the body gradually, so do not panic if you do not work Market or something similar - will appear. Most likely this is due to the cookie or caching.
special version Work fine with USB adapter Netgear WNA1100.
The author will be glad to any manifestations of gratitude, the more so, This guide was born in the throes of an extremely fragmented by gathering information from all over the Internet.
K
Any additions, tips and solutions firewall issues are welcome.
Unsubscribe in the subject and use the button Post has been editedJohnny P - 05.06.11, 10:31