Astral_ps,
I know.
Shing Exceptionally Low

Yesterday almost killed the phone.
So, here is a sequence of events:
There was a firmware 1.0.2 Xejl2. I guess this, Baltic. Began to flash strictly by faki (hands are not curves, like). I finally flash.
The third file jumped error and everything.
With the following samples of the phone firmware, "Error: Warring Fail" is something like that. And on the computer, and on a laptop I gave this error for 6 !!! Watch! I could not do anything with the phone, but it is impossible to turn off, but I decided. I rebuilt it and began to show that there is no FOTA. I tried to download it separately, but also unsuccessfully. He began to make full firmware again. The sickle is somewhere half an hour button "Download" and Oh, Miracle! The firmware began. But it was somehow strange. It would all be, but until the 2nd stage I did not come (updating the firmware) and I myself was scary to do something else, and so I barely reanimated. And it turns out that I selected the phone by 40% of the charge. So, now costs 1.0.2 xxjh3. And the phone works fine, the truth it seemed to me that the battery was faster to spend. During the hour of waiting - 1% charge. But is it normal? Previously, it seems, it was 2 hours 1%. I know.
In general, I do not know what to do, whether to fake on 1.2 or not experiment, because it is somehow not really want to get a brick.

From Dunlotud Fashion You can go 10 seconds with a shroud of shutdown or stupidly removing the battery.
In principle, to kill the phone at the end you need well, sooo try hard.

Kucerembo,
I came out, by pressing the button off 10 seconds.
If during the firmware failure will happen and I will turn it again, is there a chance that it will no longer turn on?
And then I want to stick to 1.2, and is afraid :(

Well, I had everything normal (I have!)
when the error is flying without turning off the phone
Remove the Boot Change and Full Download checkboxes, checkboxes from files that boot and have a file on which an error (what is the way?). Sil so normal completely.
You can also try different versions of firmware.

Kucerembo,
I had a mistake on apps. And then Loader issued an error "Warring: Security Fail !!" And everything, I could not flash. This mistake closed even before flashing.
And, by the way, I rebooted the phone and pah-pah-pah, nothing happened. And so I was afraid that there would be a brick :(

Post has been editedfilin2k9 - 05.04.11, 23:47

People, and XXJH3 or XEJL2 official?
That is, having one of these firmware, can I boldly carry the body in the SC, if you guess what?
thank

filin2k9,
Xejl2 official Russian

I looked through the posts for similar problems, but I did not find solutions, because My difficulties have their own specifics.
The following happened:
Updated kies.
The program suggested updating the firmware
The firmware through Kies updated to this several times without any problems or additional actions.
I will click "update the firmware" and immediately flies the Firmware Updater - the phone is immediately determined in Kies
reinstalled kies, updated the driver, rebooted the computer - does not help


No one has considerations about the causes of such behavior of the phone / company / kies?

Here is an error code that gives the system:

Description:
Stopped working

Signature problems:
Problem Event Name: CLR20r3
Signature Problems 01: GT-S8500.exe
Signature of the problem 02: 11.3.24.1
Signature problems 03: 4D8A906F
Signature Problems 04: FirmwareUpdateAgent.common
Signature problems 05: 1.0.0.0
Signature problems 06: 4D8A906F
Problem Signature 07: CD
The signature of the problems 08: 0
The signature of the problem 09: System.IndexOutOfRangeException
OS version: 6.0.6002.2.2.0.768.3
Language code: 1049

Guys, and if I buy Wave II from a German online store, will the Russian language? If not, what should I do?

LifePSD,
Is not a fact. It will be necessary to go to the Russian firmware, change the product ...

LifePSD,
Everything will be OK! You can get on the Russian firmware with the pre-configuration and will work normally

Firmware Official penultimate see I can not (because:

The S8500 phone has changed one SIM card to another, launched the mode on the plane, then turned off the mode and changed to another SIM card, began to brake, then even worse hang.
turned off turned on, and it constantly reboots, took out the battery, took out a memory card, but everything is still, first the inscription Samsung, then the screensaver of Bada and again everything is in a circle, what to do? Or not to wisely carry in the SC?
Maybe there is some kind of hard reset?

Tell me pliz, is it worth reflashing from s8500xejh5 to the latest firmware? And what does she give? Or this leave? What is the most normal firmware now?

Gentlemen, and those who have stitched to the last firmware through the vouches, noticed the bug with the settings of the accounts? (Application Standard Accounts).
When I try to run it (and generally set up something in the mail accounts) the phone simply goes into the reboot.
Fortunately, configured before the update, and it's bad it works yet, but I would like to know, maybe who also has such a problem :)

ponedelneg There was the same situation with accounts. I had to do hard cuts and restore everything.

Is it possible to put Adobe Flash Player 10 on this phone?

Recording can be activated manually (only for Russian firmware), everything works without preconfiguration:
1) Download sTune program (such as version 1.07).

2) We connect the phone via the USB cable to the computer in the "KIES" mode and run Stune (KIES must not be running).

3) In Stune on the "Devices" tab, do a double click on the "Samsung Mobile Modem V2" device or select the device and press the "Auto Connect" button.

4) Next, go to the "Browser" tab. In the list of the phone file system (left), select the "Registry" folder, then in the list of files (right), select the shpcscampleature.ini file, press the right mouse button on it and select the "Copy ..." command in the context menu and place on the computer disk where to copy this file.

5) Open the SHPCScFeature.ini copied file from the computer disk by any text editor (for example, notepad).

If the contents of the file as follows:
#DEF
SHP_CSC_FEATURE_NAME_ENABLE = 1
SHP_CSC_FEATURE_NAME_DISABLE = 0
SHP_CSC_FEATURE_FOTA_DISABLE = 1
- you need to add to the end of the line:
SHP_CSC_FEATURE_RECORD_VOICE = 1

If you already have a line:
SHP_CSC_FEATURE_RECORD_VOICE = 0
- change the 0 to 1.

Next, save the file.

6) Copy the edited file shpcscfeature.ini back to the phone via Stune - simple dragging (DRAG-AND-DROP) file to the right list of files.

7) Reboot your phone.

If you did everything correctly, then during a telephone conversation in the menu on the button "..." the "Record Voice" command should appear.

Explain why after the firmware to the Baltic 1.2, I have a firmware version that in the phone that in Kisa S8500xEKA1, the same firmware from Bad 1.0, although the phone is clearly 1.2

Dosmod
The same firmware from 1.2.