Gigabyte GSmart MW700 / MS800 firmware FAQ



Rep: (1090)
Gigabyte GSmart MW700 / MS800 - FAQ on the firmware
Description MW700 | Description MS800 | Windows Mobile FAQ | Single out the FAQ by GSmart пїЅ | Discussion пїЅ | FAQ | Firmware пїЅ | FAQ on firmware | The single theme for firmware Gigabyte GSmart пїЅ


Content:


Post has been editedCatg - 18.01.11, 01:07
Reason for editing: 1 from Mikhail_K7 through the "Complaint".



Rep: (1090)
What is XP (hard reset / hard reset)?

Hard reset - hard reset. When it deletes all programs and data stored in the PDA memory, and the unit returns to the original settings.
The device becomes a "clean" as in the time of purchase.



Rep: (1090)
How to XP (hard reset / hard reset)?

Method 1:
- Open the Start - Programs - Utilities - Format Systems (factory settings).
On the English version: Start / Programs / Tools / Restore to Default
Method 2:
- turn off the device;
- hold the camera key on and off
- 5-10 seconds, the black box, which will be written something like: system formating --- please pull the battery, you need to remove the battery and insert again
- Press the power button and wait for 1-2 minutes

Post has been editedalex - 24.08.10, 20:00



Rep: (1090)
The order of the firmware:

Attention!!!
After flashing all user data in the device memory will be destroyed! It recommended that you move the files you need a memory card. To transfer data PIM (eg, contacts) use Outlook on your computer or a special program, for example, PIM Backup, which saves the PIM-data in an easily editable files. Also, be sure to read before flashingthis information.

1. Download the appropriate version of the firmware (file). Select and download firmware canhere.
2. Extract;
3. Move the contents of the archive to the root of the memory card;
4. Turn off the device;
5. Scroll down the volume control, and simultaneously press the power button (do not hold the volume knob until a service window);
6. A Flash Utility (buttons can be released) the .Srazu connect the device to an outlet (at that moment), to update held stably. Installing the firmware will start itself: will appear blue squares, flashing blue light (read from the card into the memory) and then yellow (record from memory to flash), when the forward stop appearing squares (blue light goes out), the procedure takes about 20 minutes;
7. After follow the indication "Please take out the battery" to remove the battery for 1 ~ 2 seconds, then plug it in and turn on the phone.
8. Once the download will happen, click on the screen with the stylus and calibrate the screen you will be offered;
9.1 and then select the time zone and click Next (Next);
9.2 You will be asked to work with a stylus, you can skip this step by clicking Skip (Skip), or execute the item, clicking Next (Next);
9.3 then you will see a window where you are prompted to enter a password, this step can be skipped by pressing the Skip (Skip), or to enter a password, clicking Next (Next).
This completes the firmware update is completed.

Post has been editedalex - 31.08.10, 21:52



Rep: (1090)
How to bypass / skip screen calibration after the firmware (if a sensor is broken / cracked screen)?

Method number 1:
1. When the proposed calibration device connected to the PC (compound with ActiveSync Dolny be successfully established).
2. Go through the PC Explorer on your device at the Windows / StartUp, and remove the "Welcome" file.
3. Reboot the device.

Method в„–2 (thanks SmartServiceMan):
1. Create a file in the root welcome.not memory card.
2. Insert the memory card into the device and load the operating system.
Note
The following download is possible to do without the memory card. The contents of the file is not important, you can simply empty.


Post has been editedalex - 31.08.10, 21:52


Full version    

Help     rules

Now: 31.10.20, 22:09