The procedure for firmwareAttention!!!
After flashing all user data in the device memory will be destroyed! It recommended that you move the files you need a memory card. To transfer data PIM (eg, contacts) use Outlook on your computer or a special program, for example, PIM Backup, which saves the PIM-data in an easily editable files. Also, be sure to read before flashing
this information.
Method 1:1. Download the appropriate version of the firmware (file). Select and download firmware can
here2. Unzip
3. After unpacking the archive, go to the unpacked folder, there should be 8 files (Readme.txt file)
4. Connect the PDA via ActiveSync and run the file "DLoader.exe"
5. In the flasher agree with the terms (put "daw" where it is necessary and click "Next")
6. After that, the flasher push the button "Download"
7. After clicking "Download", the unit will restart in firmware download mode, and it will be necessary to wait until the operation is completed.
8. After the firmware on your computer screen will be notified and the device will restart. In the flasher, click "OK" and it will close.
Method 2:1. Download the appropriate version of the firmware (file). Select and download firmware can
here2. Unzip
3. After unpacking the archive, go to the unpacked folder, there should be 8 files (Readme.txt file)
4. Open ActiveSync. Select "File" ->"Connection Settings ...". In the opened window remove the checkbox beside "Allow USB-connection" and click "OK" button.
5. Turn off the device while holding the call button and reject press button comprises (hold keys before the indicator will blink green).
6. Connect PDA via USB and run the file "DLoader.exe"
7. In the flasher agree with the terms (put "daw" where it is necessary and click "Next")
8. After that, the flasher push the button "Download"
9. After clicking the "Download" button, the unit will restart in firmware download mode, and it will be necessary to wait until the operation is completed.
10. After the firmware on your computer screen will be notified and the device will restart. In the flasher, click "OK" and it will close.
Post has been editedalex - 31.08.10, 21:54