[X]Assistant

[Ironia]

Phantom DVM HD, HDithe old unit is discussed herePhantom DVM (A series of regular tape recorders not HD)

пїЅпїЅпїЅпїЅпїЅпїЅпїЅпїЅ: download

High-speed Internet in the car has become a reality and now you can learn about traffic jams, view news, communicate with partners, colleagues, friends, using Internet-based instant messaging applications without leaving your car.
The novelty is equipped with a high-speed USB 2.0 host for connecting GSM / GPRS / CDMA modems and various USB devices. For the convenience of users, MP3 files are displayed by directories. The function of storing the last played MP3 file in different modes will be convenient when listening to audio books.
The multimedia center is able to read information from SD cards of the standard HC (High Capacity) up to 16 GB and is equipped with a new Bluetooth module (version 3.0).
Phantom DVM-XXXX HDi has a high-resolution digital touch screen (800x480 pixels), built-in 1GB memory for ripping CDs, a TV tuner, a highly sensitive AM / FM tuner, a DVD / CD player with support for MP3, DivX and other popular formats, built-in 3D navigation (SiRF starIII) with maps of all of Russia in the kit.
Installing a multimedia navigation center is the easiest and most convenient way to improve the car audio system, having received a full range of modern information and entertainment functions.

Improvements in DVM-xxxxG HDi headunits.

1. Reading directories in DVD, CD, USB and SD modes. MP3 files are displayed by directory
2. Memory of the last played MP3 file in DVD, CD, USB and SD modes.
3. Reading SD card standard HC (High Capacity). Verified SD HC cards up to 16Gb
4. Uses new Bluetooth module (version 3.0)
5. High-speed USB 2.0 host for connecting GSM / GPRS / CDMA modem and various USB devices
6. Improved steering wheel control:
- the NEXT button on the steering wheel works to switch to the next radio station or track, with an active Bluetooth call, this button works like LIFTING A TUBE
- the PREVIOUS button on the steering wheel works to switch to the previous radio station or track, with an active Bluetooth call, this button works as a PUT.
- the button LIFT THE PIPE on the steering wheel works to answer an incoming call or if there is no active Bluetooth call to switch to the navigation mode

7. Technical data of the new GPS card:
- CPU: ARM11,533MHz
- OS: Windows CE 5.0
- RAM: 128Mb DDR
- Built-in memory for storing files: 128Mb
- high resolution display: 800 * 480
- GPS chipset: Sirf Star III (50 channels)
- GPS accuracy: 5-10 meters
- GPS refresh rate: 1 sec
- GPS hot start: about 2 seconds
- GPS warm start: about 30 seconds
- GPS cold start: about 30 seconds
- max. GPS usage altitude: 18000 meters (average flight altitude is 10,000 m)
- max. GPS speed: 515 m / s (1854 km / h, avg. flight speed 1000 km / h)
- max. acceleration: 4g (Formula 1 pilot experiencing 6g overload)
- GPS port: COM1
- GPS speed: 9600

general information

Official site
Official Representative in Russia, the company Stopol. Tech Support PHANTOM DVM-XXXX HDi.
Phantom Clones
Additions and refinements to the Phantom DVM-xxxxG HDi
The Internals of the Phantom, Part 1
Insides of the Phantom, part 2
Multimedia guide with diagrams and photos for the repair of phantoms on the platform D106

Datasheet MT1389 (processor in our GU) - thankseGreyWolf

General Feature List
Super Integration DVD player single chip
High performance analog RF amplifier
Servo controller and data channel processing
MPEG-1 / MPEG-2 / JPEG video
Dolby AC-3 / DTS / DVD-Audio
Unified memory architecture
Versatile video scaling & quality enhancement
OSD & Sub-picture
2-D graphic engine
Built-in clock generator
Built-in high quality TV encoder
Built-in progressive video processor
Audio effect post-processor
Audio input port
High Performance Analog RF Amplifier
Programmable fc
Dual automatic laser power control
Defect and blank detection
RF level signal generator
Speed ​​Performance on Servo / Channel Decoding
DVD-ROM up to 4XS
CD-ROM up to 24XS
Channel Data Processor
Digital data slicer for small jitter capability
Built-in high performance data PLL for РЎannel data demodulation
EFM / EFM + data demodulation
Enhanced channel data frame sync protection & DVD-ROM sector sync protection
Servo Control and Spindle Motor Control
PLL to CW and CAV mode
Built-in ADCs and DACs for digital servo control
Provide 2 general PWM
Tray control can be PWM output or digital output
Embedded Micro controller
Built-in 8032 micro controller
Built-in internal 373 and 8-bit programmablelower address port
1024-bytes on-chip RAM
Up to 4M bytes FLASH-programming interface
Supports 5 / 3.3-Volt. FLASH interface
Supports power-down mode
Supports additional serial port
DVD-ROM / CD-ROM Decoding Logic
P-codeword or Q-codeword for high-speed ECC logic
Automatic sector mode and form detection
Automatic sector Header verification
Decoder Error Notification
Provide error correction acceleration
Buffer Memory Controller
Supports 16Mb / 32Mb / 64Mb / 128Mb SDRAM
Supports 16-bit SDRAM data bus
Provide the self-refresh mode SDRAM
Block-based sector addressing
Support 3.3 Volt. DRAM Interface
Video decode
Decodes MPEG1 video and MPEG2 main level, main profile video (720/480 and 720x576)
Smooth digest view function with I, P and B picture decoding
Baseline, extended-sequential and progressive jpeg image decoding
Support CD-G titles
Video / OSD / SPU / HLI Processor
Arbitrary ratio vertical / horizontal scaling of video, from 0.25X to 256X
65535/256/16/4/2-color bitmap format OSD,
256/16 color RLC format OSD
Automatic scrolling of OSD image
Slide show transition as DVD-Audio Specification
2-D Graphic Engine
Support decode Text and Bitmap
Support line, rectangle and gradient fill
Support bitblt
Chroma key copy operation
Clip mask MT1389 PRELIMINARY, SUBJECT TO CHANGE WITHOUT NOTICE MTK CONFIDENTIAL, NO DISCLOSURE
Audio Effect Processing
Dolby Digital (AC-3) / EX decoding
DTS / DTS-ES decoding
MLP decoding for DVD-Audio
MPEG-1 layer 1 / layer 2 audio decoding
MPEG-2 layer1 / layer2 2-channel audio
High Definition Compatible Digital (HDCD)
Windows Media Audio (WMA)
Advanced Audio Coding (AAC)
Dolby ProLogic II
Concurrent multi-channel and downmix out
IEC 60958/61937 output
- PCM / bit stream / mute mode
- Custom IEC latency up to 2 frames
Pink noise and white noise generator
Karaoke functions
- Microphone echo
- Microphone tone control
- Vocal mute / vocal assistant
- Key shift up to +/- 8 keys
- Chorus / Flanger / Harmony / Reverb
Channel equalizer
3D surround processing
Tv encoder
Six 108MHz / 12bit DACs
Support NTSC, PAL-BDGHINM, PAL-60
Support 525p, 625p progressive TV format
Automatically turn off unconnected channels
Support PC monitor (VGA)
Support Macrovision 7.1 L1, Macrovision 525P and 625P
CGMS-A / WSS
Closed Caption
Progressive output
Automatic detect film or video source
3: 2 pull down source detection
Advanced motion adaptive de-interlace
Edge preserving
Minimum external memory requirement
Audio input
Line-in / SPDIF-in for versatile audio processing
Outline
256-pin LQFP package
3.3 / 1.8-Volt. Dual operating voltages

Reviews from third-party resources:

001- From the site drive2.ru
002- From the site cinik.ru
003- From avtozvuk.com

Useful tips, helpful answers

Official FAQ PHANTOM DVM-XXXX HDi. Read before asking a question.
Debug menu. Hard Reset. Installing i-Net.
Restoring firmware version iNet version 1.5
In the section "Software". Item "Firmware version I-Net 2.0."
Firmware experimental version of I-Net version 2.7
I-Net version 3.0
Changing the mode from cdrom to modem or vice versa
Accidentally deleted the maplaunch.ini file, what to do
How to configure the registry in the car so that the USB modem can be seen
I can not disable the RDS function in the "7253" menu
Video Converter for viewing on the GU
Secret VHF Range
How to enable random file playback?
How to find Id devices in our head
Correct formatting of an SD card
question with clock and date: the menu starts, but the date and time are not correct
How to reduce iNet download time
GAPI, request to select the resolution or type of device and bla bla bla
Description of the service menu
Squeak when connecting and disconnecting from the Internet and other system sounds?
Connection of non-standard parking sensors and cameras
Connecting the ELM327 scanner to the Phantom DVM-4007G HDi PG via USB Bluetooth adapter
Install and configure Phantom DVM-3046G iS

Change the interface of the DVD player GU

The procedure described below has not been practically tested yet. Repeat solely at your own risk. Claims if something went wrong exclusively to the manufacturers of hardware and software and to themselves.
With a successful and unsuccessful update, please report for accumulation of positive and negative experience.
Part one. Hard
Part two. SOFT

Modems tested on the state

Work
Megaphone Huawey E1550 (black) works after flashing (firmware on ofsayte stopol)
Megaphone Huawey E1550
Megaphone Huawey E173
MTS ZTE MF112
MTS ZTE MF627
MTS E171 (black, old)
Does not work
MTS E171 (black, new) did not “wound up”. Even after flashing it in E173

FAQ on connecting the modem to the head from sergeevalex

1. I have a radio tape recorder with an HD label (not HDI). Will navigation, internet, alternative menus work?
Reflash Phantom DVM - **** HD in Hdi, unfortunately, software is not possible. It is necessary to change the fee that is responsible for navigation.
a. A modem stuck in USB to HD is not recognized. For HD USB is provided only for connecting flash drives to a DVD / USB button.
b. Navitel registered for HD comes with *** _ _ VGA marking. Connects GPS to COM6 port. Navitel.Japs in the menu no. If you put Navitel with *** *** HDI, then the version is unregistered with the old keys. Navigation card for HDI catches GPS on COM1. Accordingly, Navitel satellites under HDI do not see on the HD device, there are jams in the Navitel menu. But there are, of course, no updates.
2. My modem is connecting (the blue / green diode is constantly on), but the browser gives an error, naviprog does not update the traffic jams. What DNS do I need to specify when manually configuring TCP / IP?
a. Most likely, the DNS table has flown. DNS numbers -Phantom DVM HD / HDi (Series of regular receivers)
You must specify them in the connection settings manually.
3. What port is needed for correct modem operation?
a. Stopol hangs up the modem on port 7, when using additional functionality, you need to look at the settings. Most likely com-0 is a modem, com-9 is the control port of the modem. Read more here.Phantom DVM HD / HDi (Series of full-time recorders) (Post # 8802240)
4. How to set up a new modem?
a. Preparing the modem before installation. Connecting the built-in modem flash drive. Modem commands, network settings, modem mode switching (abbreviated list). Theme:
Phantom DVM HD / HDi (Series of full-time recorders) (Post # 7170194)
b. Connecting to the GU after modem preparation. Theme:Phantom DVM HD / HDi (Series of full-time recorders) (Post # 7670036)

Navigation programs

iGo Primo 2.0 9.6.5.245577 Phantom HDi Edition No. 2 (Ukraine)thankgleb2411
Primo2 - = Phantom HDi Edition = - v. 9.6.2.209584 = TMC over HTTP, raster map, TTS, extended junctionview.thankeGreyWolf
iGO Primo 2.4 9.6.13.267029 Phantom DVM HDi
iGO8.3.4.117940thankeGreyWolf
Assembly stvipo1008_PhantomGHDithankstvipo
NaviTel-5.5.1.711 (off. Version)
NaviTel-7.5.0.282 (off. Version)
NaviTel-9.1.0.550 (off. Version)
NaviTel-9.6.2598 (off. Version)
Navigator
Yandex maps version 2217, for those who have glitches with the new version

Navigation menus, no programs

A selection of different navigation interfaces / menus
Custom menusthankeGreyWolf
Minimum build fromkondratenko
Menu fromshiko123version 1.5
Menu fromshiko123version 1.5 special version
Reworked menu fromshiko123on 3 navprogramm
Menu frombor-kaPeugeot logo + launch 4 navprogramm

VERY IMPORTANT! What should be avoided so as not to "kill" your device.
.

Post has been editedIronia - 13.07.17, 09:12

Reason for editing: Fixed link to Inet 3

[bambei]

holod,
there was a feeling that something familiar .......... not doper himself

[stvipo]

holod,
It seems that you have already disassembled the new HD firmware into atoms.
Will follow up? ...

[bambei]

stvipo
It's not about the firmware, but about the contents of the internal memory (which you yourself laid out)

[G.B.]

understand how to develop our device

the menu is made on the basis of SystemInformation, configs are simple there. You can still read about MortScript.
I was pleasantly surprised by the contents of the "shell"

Post has been editedbambei - 14.10.10, 19:51

[sponkin]

Or maybe someone will recommend a working assembly of iGO for our device. I also wanted to launch Yandex.Maps, did anyone adapt it?

[stvipo]

bambei

On the internal flash driveNand Flash2there is only a menuNAVIGATION(interfaceiNET), which is activated either from the MAIN MENU or a hardware buttonNavon the device.

Those. diskNand Flash2contains:
1. Shell with 2-page menu:

built as rightly observedG.B., onSIpoleMortscript(as a binding application).
2.The applications launched from the shell themselves (see the iNet interface manual):
- Opera browser 9.5b286
- Music Player Microfi Nitrogen 1.1alpha4
- Total Commander
- Screen calibration (touchkit.exe, touchcal.exe)
There is no navigation program on NandFlash2, it (Navitel) is on a separate flash drive.
3. Service programs: MVButton, EuroKeyboard, portspliter, 232USB, etc. ...
4. Tumbler (just a program just in case): TRE 0.82 and 0.9, PHP devmgmt, RAR, WR ResInfo, etc ... ..
5. Richly and skillfully written shell scripts

Conclusion:
1. Nothing particularly pleasantly surprising. Nand Flash2 Does not contain, unless:
- vcom.dll, wp.dll, UsbTouch.dll (notecold weather )
- Modem support scripts.
2. Most delicious: Main menu system - stayed behind the scenes, like herself OS .
The OS is the object of the firmware, while the “Main Menu System” may have been stuck on the unmounted part of the internal flash disk.

These tastes were the context of my question.to cold .

[holod]

stvipo
I do not have this firmware, so there is nothing to undo, unfortunately. I just looked at the archive and suggested that this menu was made in Stopol. If you have the firmware lay out, pick it up :)

[tarikm]

: beee: spent an hour, and could not find a working assembly for an HD phantom ...
please tell me where to look!

[alans]

If at the start of the shell, poke the stylus into the center of the screen and hold for 5-7 seconds. We will see a very interesting service menu.

[Theboxer]

Anyone who can not find the assembly and run.
After 3 days of torment, calculations, iterations, it was still possible to launch iGO on the whole screen, and the assembly was working.
We take this assemblyClick

Everything is standard in the maplauch.ini file
[NAVI]
path = iGO8 \ iGO8.exe;
bmpiconpath = ui \ navione.bmp;
nocardmsg =;

In the sys file.ini txtin the interface section, specify the resolution 400x240
In the rawdisplay section
screen_x = 800
screen_y = 480

After all this, the program runs and runs full screen in my Phantom HD.


Post has been editedbambei - 14.10.10, 19:52

Reason for editing: adapted image and corrected errors

[sponkin]

Is it possible to connect the device with a computer?
Or how can I access Nand Flash2 bypassing the standard shell and launching Explorer &

Post has been editedbambei - 14.10.10, 19:53

[tarikm]

path = iGO8 \ iGO8.exe;

In the sys.ini file, in the interface section, specify the resolution 400x240
In the rawdisplay section
screen_x = 800
screen_y = 480

Igo8.exe files on this assembly NO!
sys.ini ALSO

Post has been editedbambei - 14.10.10, 19:53

[bambei]

tarikm
aplication.datrename toigo8.exe

[sponkin]

How can I flash Nand Flash2?
I communicated with Stopol service centers, the information is contradictory: from the fact that you need to remove your head and reflash with a special device, to the fact that you can insert an SD-card with special content and everything will be fine.
Is it really impossible to connect a head with a computer?

Post has been editedbambei - 14.10.10, 19:53

[bambei]

sponkin
why reflash? that head

Post has been editedbambei - 04.08.10, 22:15

[sponkin]

Yes, I am in terms of the development of the navigation menu, or I am not on the right path.

[bambei]

sponkin
if there is no experience .......... WinCE is very capricious, you can easily screw up the unit, and recovery only in service (firmware for this unit in the vastness of neta have not yet seen)

Post has been editedbambei - 04.08.10, 22:12

[sponkin]

Experience with such devices is not enough, previously flashed communicators. But nevertheless, that's what I found out, if wrong, correct.
WinCE is used only for iNet (navigation, browsers, other programs). All the contents of this happiness are stored on Nand Flash2.
Where the main firmware of the device (radio, TV, DVD, etc.) is stored I did not understand.
With Nand Flash2, in principle, you can experiment. I have a firmware that updates iNet in case of problems. To do this, click Restart Navi, agree and when the download starts to keep and do not let go a long stylus in the center of the screen. As a result, the inscription first flashes in red letters, and then a menu of 4 points will appear. The first 2 are of the type to run and update the firmware from the SD card (perhaps these items are related to updating the main firmware), we need a third one - format the flash, the 4th item is the output. The menu items in the cycle change, you need to release the stylus on time at the 3rd point. After formatting, standard WinCE will load. Next, insert the SD card with iNet firmware into the GPS slot and follow the instructions.
The firmware itself:
_____________ DVM_NB ________________. Rar(6.07 MB)

iGO I took myself from here:
Tynts.
Be sure to follow the recommendation (If the resolution of the device is not: 480x272, 480x234 or 320x240 - this is the message for you)
In general, I have a desire to put another Yandex.Maps for our device (as I understand it, adaptation is needed) and to have a more developed iNet menu in order to launch programs from the shell, and not to climb into the explorer.

Post has been editedbambei - 14.04.12, 21:31

[alans]

Firmware for NandFlash2

I_net_Autoran ________. Rar(6.09 MB)



Before flashing you need to farmat NandFlash2 through the service menu

Post has been editedbambei - 24.01.11, 17:35

[sponkin]

I understand that I have firmware version 1.14, maybe a newer one.