Help flash device | Search for firmware in this thread is prohibited!
search the forum 
(under reputation) and let us know who helped you, whom to put the "+". Hello to all! I use M001 firmware 1.6 for several days! First impressions - satisfied! Of course it slows down, but the battery holds well: without Wi-Fi in the user and read mode - 3.5 hours minimum, charging time - approx. 2.5 hours (until it’s definitely detected). Delivered various programs for applications (uninstaller, power supply ....). The problems are only with reading the PDF, or rather I tried all the available programs for pdf - none works in the full desired form, then you cannot make bookmarks in one, then (Ireader) - does not open books - asks for opening options (text, PDB .... ) and displays glitches, in short - I understand. Yes, another misunderstanding arose with the desktop: by mistake I took out again an extra icon there, but I can not find how to delete it! Who knows - tell me! Add to slave. There is a menu table, but where can I delete it?
Tell me a way out of the situation: at work they gave the NONEYM device (according to the pictures and characteristics on the box + there is an inscription M-001 and a sticker on the mac on the back) in order to set up office applications and skype there.
decided to flash this device with firmware Slatedroid1.3_1.7.4_base_.rar
Formatted the USB flash drive, wrote down the firmware, inserted the card and turned it on.
The inscriptions went: cleaning the old firmware, recording a new one. But it hung on the inscription: Writing a file system!
I waited 30 minutes, without waiting for the next inscription, I turned it off and tried to turn it on by removing the card, but there was no reaction other than the power on indicator on the device.
What do you advise?
decided to flash this device with firmware Slatedroid1.3_1.7.4_base_.rar
Formatted the USB flash drive, wrote down the firmware, inserted the card and turned it on.
The inscriptions went: cleaning the old firmware, recording a new one. But it hung on the inscription: Writing a file system!
I waited 30 minutes, without waiting for the next inscription, I turned it off and tried to turn it on by removing the card, but there was no reaction other than the power on indicator on the device.
What do you advise?
xmkos,
glenhold
try thishttp://rapidshare.com/files/410580703/v4.rarfirmware.
True, it started up on one device, but not on the other (
One thing is good, if it starts up, everything will work (at least on one of the devices it was), and the version is fresh 1.8 (this is not an android version, but rather a build of type 1.7.4).
Good luck!
P.S. If it starts, we say thanks to the SlateDroid team;)
glenhold
try thishttp://rapidshare.com/files/410580703/v4.rarfirmware.
True, it started up on one device, but not on the other (
One thing is good, if it starts up, everything will work (at least on one of the devices it was), and the version is fresh 1.8 (this is not an android version, but rather a build of type 1.7.4).
Good luck!
P.S. If it starts, we say thanks to the SlateDroid team;)
Android 2.2 is released. Someone, as they say, even works :)
http://forum.viarts.ru/showthread.php?t=1075&page=2
http://forum.viarts.ru/showthread.php?t=1075&page=2
A Chinese partner shared firmware that they themselves call Firmware Reboot Doctor. It was possible to cure several tablets that were not treated by anything else. No guarantees of success! Only in the most extreme cases at your own peril and risk!
http://hotfile.com/dl/59975198/f67fdbc/script.rar.html
http://hotfile.com/dl/59975198/f67fdbc/script.rar.html
M
The discussion of devices is here:Android tablets and multimedia devices from China - Discussion
Please do not offtopic
Please do not offtopic
Post has been edited5 [Strogino] - 11.08.10, 15:58
Well, in general, having sorted through a bunch of everything that is possible (firmware), I installed it as "Flytouch / Epad"
http://www.slatedroid.com/downloads.php?do...d=45&page=2(like so - but registration is needed to download)
installed ... it works ...... I just can’t put a static address on wifi ....... can someone tell me how to do this?
Post has been editeddx69 - 14.08.10, 16:24
http://www.slatedroid.com/downloads.php?do...d=45&page=2(like so - but registration is needed to download)
installed ... it works ...... I just can’t put a static address on wifi ....... can someone tell me how to do this?
Post has been editeddx69 - 14.08.10, 16:24
Sweex @ 15.8.10, 15:58
but here and the trouble - without a memory card - loads normally, but with a card on which there is a script folder with a request - it stops at the android logo ... and is silent ... how to flash? is there any thread of thought?
There was the same problem. Some firmware do not accept a script card.
Solution: flash one of the old firmware (1.7.1 helped me), and then you can flash any new one ...
Took advantage of Howto attached tohttp://www.slatedroid.com/flytouch-epad/
I did it myself:
Unpacked the script from M001 1.7.1 to the card
I requested (the device finds it correctly)
unpacked on a script card from my model FlyTouch 1.8.2
I requested (now this firmware was recognized on the card)
this is still amazing.
I don’t know if the reason is that the device is Chinese
but I switched to slatedroid 1.3
exclusively in this way
described onhttp://www.dealextreme.com/forums/Forums.d...threadid.673103in English
here is the translation
The procedure for installing new firmware on FlyTouch / ePad
externally recognized by the image under the spoiler and specifications
1) Download the firmware Slatedroid1.3-flytouch-editionscript-v2.rar file from Slatedroid.com.
2) Download 7-ZIP archiverhttp://www.7-zip.org/
3) Download panasonic SDFormatter program for formatting memory cardshttp://panasonic.jp/support/global/cs/sd/download/index.html
4) SD card format (I decided not to use the fast version of the format, the full format was done) (as it is written in the original, I also did not fast but full format_)
5) We extract *. RAR file to the memory card. that is, not on the desktop unzipped and then copied. But it is unzipped to a memory card
6) turn off the device, install the SD card.
7) Installation starts, and then prompts you to remove the SD card
8) Note that for me this was not possible with the wrong formatting halfway through saying no "script" I read on newsgroups and then when I read about reformatting the SD card.
9) When you reboot, you have a new operating system.
The first boot of the OS is long, about 5 minutes
It may well be my problem in that I had a poppy and did all the procedures through the Windows bootkamp. or all the same, it's about formatting the card, but I formatted it using regular Windows forces - it didn’t help
and I haven’t tested it yet in full measure (I’ve just changed it, my bosses are not around) - what works is not, but it seems that there were no problems with this firmware
poke - unsubscribe
Post has been editedAnythingdust - 18.08.10, 14:03
I don’t know if the reason is that the device is Chinese
but I switched to slatedroid 1.3
exclusively in this way
described onhttp://www.dealextreme.com/forums/Forums.d...threadid.673103in English
here is the translation
The procedure for installing new firmware on FlyTouch / ePad
externally recognized by the image under the spoiler and specifications
CPU пјљ VIA WM8505
RAM пјљ 256MB DDR2
Flash ROM пјљ 2GB
.
RAM пјљ 256MB DDR2
Flash ROM пјљ 2GB
.1) Download the firmware Slatedroid1.3-flytouch-editionscript-v2.rar file from Slatedroid.com.
2) Download 7-ZIP archiverhttp://www.7-zip.org/
3) Download panasonic SDFormatter program for formatting memory cardshttp://panasonic.jp/support/global/cs/sd/download/index.html
4) SD card format (I decided not to use the fast version of the format, the full format was done) (as it is written in the original, I also did not fast but full format_)
5) We extract *. RAR file to the memory card. that is, not on the desktop unzipped and then copied. But it is unzipped to a memory card
6) turn off the device, install the SD card.
7) Installation starts, and then prompts you to remove the SD card
8) Note that for me this was not possible with the wrong formatting halfway through saying no "script" I read on newsgroups and then when I read about reformatting the SD card.
9) When you reboot, you have a new operating system.
The first boot of the OS is long, about 5 minutes
It may well be my problem in that I had a poppy and did all the procedures through the Windows bootkamp. or all the same, it's about formatting the card, but I formatted it using regular Windows forces - it didn’t help
and I haven’t tested it yet in full measure (I’ve just changed it, my bosses are not around) - what works is not, but it seems that there were no problems with this firmware
poke - unsubscribe
Post has been editedAnythingdust - 18.08.10, 14:03
Hello to all.
That's what I got herehttp://www.slatedroid.com/zt-180/5120-new-...8-released.html. Is this new firmware on the ePad Flytouch mid? Or did I misunderstand something?
That's what I got herehttp://www.slatedroid.com/zt-180/5120-new-...8-released.html. Is this new firmware on the ePad Flytouch mid? Or did I misunderstand something?
but firmware 1.9_88 rutted with a pre-installed market:
http://www.4shared.com/file/be8XWhW2/flyto...ted_market.html
http://www.4shared.com/file/be8XWhW2/flyto...ted_market.html
[email protected], 18:07
Your link doesn’t load. Throw pliz somewhere on another file hosting. And yet, did you set it yourself? How is performance? Does the market work?
this linktry it (for ePad Flytouch)
Yes, I installed it, everything works, a video appeared, the market is standing, but accounts.db must be created in the emulator and copied to the tablet, it works smartly
while I stay on it
Post has been editedPooh - 21.08.10, 19:20
HidePerso @ 27.8.10, 5:47
CPU: VIA 8505+ ARM926EJ-S
Hard Disk: 1GB NAND Flash
RAM: 128M
Build: 1.7.4
Uses microSD
Webcam
Buttons: Power, volume (rocking) and round "Return"
There is not a single inscription on the bottom, but a silver apple is pasted} -)
And, of course, no firmware after that normally went on it: yes2:
After a day of beating, flashing with firmware and lamentations all in a row, a similar model was found (typical ventilation holes and the presence of a dongle) SKU3980 - - - - APAD MID-710
The problem was that the firmware on the panda forum for units with 256M memory, and this is a device with 128M. A characteristic sign - at the start of some firmware they hung on the item "Update Filesystem"
As a result, I fixed the scriptcmd insolently for the required RAM size and, lo and behold, the firmware went to the end and the device completely worked! As I understand it, this is the version of FlyTouch / Epad c 128M. Therefore, having a working firmware on hand, I also tried to edit -flytouch-1-9_88-rooted-market-installed-v0-2-a.html] FlyTouch 1.9_88 rooted with market installed v0.2
The result is positive! The firmware got up, then the market earned after shamanism.
The only glitch is that at the first boot at some point, the green droid on the boot screen goes in stripes, then @ Android @ appears and everything loads correctly. I hope my story will help someone or caution: rofl:
Hard Disk: 1GB NAND Flash
RAM: 128M
Build: 1.7.4
Uses microSD
Webcam
Buttons: Power, volume (rocking) and round "Return"
There is not a single inscription on the bottom, but a silver apple is pasted} -)
And, of course, no firmware after that normally went on it: yes2:
After a day of beating, flashing with firmware and lamentations all in a row, a similar model was found (typical ventilation holes and the presence of a dongle) SKU3980 - - - - APAD MID-710
The problem was that the firmware on the panda forum for units with 256M memory, and this is a device with 128M. A characteristic sign - at the start of some firmware they hung on the item "Update Filesystem"
As a result, I fixed the scriptcmd insolently for the required RAM size and, lo and behold, the firmware went to the end and the device completely worked! As I understand it, this is the version of FlyTouch / Epad c 128M. Therefore, having a working firmware on hand, I also tried to edit -flytouch-1-9_88-rooted-market-installed-v0-2-a.html] FlyTouch 1.9_88 rooted with market installed v0.2
The result is positive! The firmware got up, then the market earned after shamanism.
The only glitch is that at the first boot at some point, the green droid on the boot screen goes in stripes, then @ Android @ appears and everything loads correctly. I hope my story will help someone or caution: rofl:
I have:
http://www.buyincoins.com/epad-7-touch-mid...oduct-1851.html
ePad 7 "Touch MID Notebook
# CPU Type: VIA VT8505 ARM926 450MHz
# Operating System: Google Android 1.7
# LCD Size: 7 "TFT LCD
# Resolution: 800 x 480
# Touch Screen: Full Size, High Sensitive Touch Operation
# System Memory: Spec 256MB Memory
and the same trouble !!!
tell me what to do !! It’s very difficult since this is a complete kettle ... maybe you can advise the link and what you need to finish with it .... I tried some versions but the system freezes and that’s it
Post has been editedVanechek - 27.08.10, 12:19
Vanechek @ 27.8.10, 13:07
ePad 7 "Touch MID Notebook
# System Memory: Spec 256MB Memory
and the same trouble !!!
tell me what to do !! It’s very difficult since this is a complete kettle ... maybe you can advise the link and what you need to finish with it .... I tried some versions but the system freezes and that’s it
# System Memory: Spec 256MB Memory
and the same trouble !!!
tell me what to do !! It’s very difficult since this is a complete kettle ... maybe you can advise the link and what you need to finish with it .... I tried some versions but the system freezes and that’s it
C Eken 256M should not be a problem, as it seems to me B) -linkNot a bad firmware, I forced the market to work on it, routine. True, in the end I changed the mapping of buttons on the device in it, otherwise I could not call the menu in fbReader} -)
Maloma @ 27.8.10, 23:51
HidePerso; And what exactly are you in the scriptcmd rules?
there are two lines that explicitly indicate the size of the RAM
for 256M this is 237M, and for 128M it is 109M. So I just replaced 237 with 109 in two places.
True, it just won’t be possible to fix it - you will also need a utility that will generate a header for this file. Here is a topic with a link to download
http://www.slatedroid.com/eken-m001-firmwa...d-all-roms.html
http://ubuntuforums.org/showpost.php?p=862...p;postcount=105
(link to the utility)
Post has been editedHidePerso - 28.08.10, 00:15
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement