Assistant
| REPLY |
 D-Link DIR-320 - Discussion | [wifirouter] Discussion, firmware, problem solving |
Message#3262  28.02.19, 09:07 | |
a guest  [offline] Group: Users Messages 5 Check in: 14.05.15 Lenovo A1000 Reputation:  0  | Maybe someone is useful (in the sense of used chips). Upgraded DIR-320 A1. Replacing K4H561638J-Lccc (16Mb x 16) on K4H511638F-LCCC (32Mb x 16) MX29LV320DTTI-70G (4MB) Replacement on MX29GL064N90TFI04 (8MB) Creating 4 MTD partitions on "Physically mapped flash": [0.424000] 0x000000000000-0x000000040000: "cfe" [0.436000] 0x000000040000-0x0000007f0000: "linux" [0.448000] 0x00000012dc00-0x0000007f0000: "rootfs" [0.488000] 0x0000003a0000-0x0000007f0000: "rootfs_data" [0.496000] 0x0000007f0000-0x000000800000: "nvram" root @ OpenWrt: / # free total used free shared buffers Mem: 61852 18124 43728 0 2236 - / + buffers: 15888 45964 Swap: 0 0 0 Attached images  Post has been editedM - 16. - 28.02.19, 09:57 |
Message#3263 01.03.19, 09:46 | |
User [offline] Group: Friendssavagemessiahzine.com Messages 64 Check in: 13.05.09 Reputation: 0 | Good afternoon! Tell me, is there a DIR-320 EEU A2E (H / W A2) can some kind of firmware torrent raise and distribute over copper or wafer? : rolleyes: |
Message#3264 01.03.19, 23:06 | |
PIONEER [offline] Group: Friendssavagemessiahzine.com Messages 703 Check in: 08.11.11 Reputation: 42 | inBot @ 03/01/19 09:46  can some kind of firmware working torus raise PADAVAN-I put BUT! I have version B1 -------------------- Noli credere ... noli timere ... ne repetas eMachines eME440 Microsoft Lumia 950 XL, HTC one M7 |
Message#3265 02.03.19, 14:17 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 588 Check in: 11.07.12 Reputation: 67 | Good afternoon! colleagues there is a DIR-320 EEU A2E (H / W A2), which of the assemblies for it is stable in operation? .. the task of it is to make a “repeater†to Mi Router 3G on OpenWrt |
Message#3266 02.03.19, 14:23 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1891 Check in: 16.11.16 Samsung Galaxy A7 SM-A700FD Reputation: 177 | -Gringo-, On the DD-WRT, you can accurately configure the client / repeater. You can still try Vampika (the fastest IMHO), but I'm not sure that a repeater is possible on it. How to sew and roll back - everything is in the cap. -------------------- The new software version is a fix for old jambs and the addition of new ones. |
Message#3267 02.03.19, 19:52 | |
Local [offline] Group: Friendssavagemessiahzine.com Messages 118 Check in: 14.11.12 Xiaomi Redmi 4 Prime Reputation: 9 | Hello. Help to understand the problem, I can not enter the router in emergency boot mode. I do by all the rules: I turn it on with the button pressed and it cuts, but it does not enter emergency mode. I made a ping check when I had to let go of the rezet, but the ping doesn't pass until you let it go. Filling firmwares from the headerRFU FirmwareandFirmware with TFTP and bat-filedoes not pass. The button itself resets works, the settings are reset. Through the web interface, d-link firmware is uploaded in any order. First of all I would like to understand this is a software problem or a hardware one, since history of the router is unknown - got by accident. P.S. revision router B1 Post has been editedRomaIIIka01 - 02.03.19, 19:53 |
Message#3268 03.03.19, 07:22 | |
a guest [offline] Group: Users Messages 9 Check in: 28.10.18 Explay N1 Reputation: 1 | Tveritin1976 @ 02.17.19, 15:23 Who has the DIR-320 rev-D with new firmware 3.0.0 and the Yota-modem falls off, try disabling IPv6 (enabled by default). Connection settings - LAN - IPv6 - Dynamic mode of IPv6-address assignment - Disabled. Also disable IPv6 on all devices. There is a suspicion that the modem falls off precisely because of the curvature of the ipv6-module firmware. Has anyone else tried it? Can you confirm? |
Message#3269 03.03.19, 09:02 | |
Veteran [offline] Group: Friendssavagemessiahzine.com Messages 1891 Check in: 16.11.16 Samsung Galaxy A7 SM-A700FD Reputation: 177 | RomaIIIka01 @ 03/02/19, 22:52 router history unknown tveritin1976 @ 03/03/19, 10:22 Can you confirm? Post has been editedevzomsk - 03.03.19, 09:05 -------------------- The new software version is a fix for old jambs and the addition of new ones. |
Message#3270 03.03.19, 10:31 | |
a guest [offline] Group: Users Messages 9 Check in: 28.10.18 Explay N1 Reputation: 1 | Evzomsk @ 03/03/19, 13:02 Perhaps Yotovsky due to overheating / lack of power chopped So it seemed to stop after ipv6 was turned off. So I'm waiting for feedback from other users of iota |
Message#3271 03.03.19, 18:11 | |
PIONEER [offline] Group: Friendssavagemessiahzine.com Messages 703 Check in: 08.11.11 Reputation: 42 | RomaIIIka01, network card set up? need to manually register. If a firmware is visible through the VEB and the firmware is flooded, then the emergency mode should work. Oh yeah .... I had a case - the standard firmware 1.2.94 seems to be - did not go into emergency mode. I reshooted the exact same firmware and she began to enter. -------------------- Noli credere ... noli timere ... ne repetas eMachines eME440 Microsoft Lumia 950 XL, HTC one M7 |
Message#3272 04.03.19, 06:07 | |
a guest [offline] Group: Users Messages 6 Check in: 11.06.17 Reputation: 0 | Hello! Help is needed! Installed on your D-Link DIR-320 B1 OpenWrt 06/18/1 - set up everything works. (I’m getting a WiFI client from a distributing iPhone, I want to configure my iPhone to be connected to a usb router in modem mode, but I don’t get anything. I downloaded and installed all the packages as instructedhttps://openwrt.org/do...artphone.usb.tetheringbut the usb interface does not appear. Here is the log of the kernel log: [[0.000000] Linux version 4.14.63 ([email protected]) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) # 0 Thu Aug 16 07:51: 15 2018 [0.000000] SoC Type: Ralink RT5350 id: 1 rev: 3 [0.000000] bootconsole [early0] enabled [0.000000] CPU0 revision is: 0001964c (MIPS 24KEc) [0.000000] MIPS: D-Link DIR-320 B1 machine [0.000000] Determined physical RAM map: [0.000000] memory: 02000000 @ 00000000 (usable) [0.000000] Initrd not found or empty - disabling initrd [0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes [0.000000] Zone ranges: [0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff] [0.000000] Movable zone start for each node [0.000000] Early memory node ranges [0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff] [0.000000] Initmem setup node 0 [mem 0x0000000000000000-0-0x0000000001ffffff] [0.000000] On node 0 totalpages: 8192 [0.000000] free_area_init_node: node 0, pgdat 803eaeb0, node_mem_map 81000040 [0.000000] Normal zone: 64 pages used for memmap [0.000000] Normal zone: 0 pages reserved [0.000000] Normal zone: 8192 pages, LIFO batch: 0 [0.000000] random: get_random_bytes called from 0x803ee72c with crng_init = 0 [0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc = 1 * 32768 [0.000000] pcpu-alloc: [0] 0 [0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8128 [0.000000] Kernel command line: console = ttyS0,57600 rootfstype = squashfs, jffs2 [0.000000] PID hash table entries: 128 (order: -3, 512 bytes) [0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) [0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) [0.000000] Writing ErrCtl register = 00040460 [0.000000] Readback ErrCtl register = 00040460 [0.000000] Memory: 27956K / 32768K available (3419K kernel code, 172K rwdata, 424K rodata, 200K init, 210K bss, 4812K reserved, 0K cma-reserved) [0.000000] SLUB: HWalign = 32, Order = 0-3, MinObjects = 0, CPUs = 1, Nodes = 1 [0.000000] NR_IRQS: 256 [0.000000] CPU Clock: 360MHz [0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns [0.000000] systick: running - mult: 214748, shift: 32 [0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 10618113593 ns [0.000016] sched_clock: 32 bits at 180MHz, resolution 5ns, wraps every 11930464253ns [0.015712] Calibrating delay loop ... 239.61 BogoMIPS (lpj = 1198080) [0.098021] pid_max: default: 32768 minimum: 301 [0.107600] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [0.120715] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [0.143518] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275750000 ns [0.163079] futex hash table entries: 256 (order: -1, 3072 bytes) [0.175330] pinctrl core: initialized pinctrl subsystem [0.188570] NET: Registered protocol family 16 [0.202675] rt2880-pinmux pinctrl: invalid group "rgmii" for function "gpio" [0.216702] rt2880-pinmux pinctrl: invalid group "mdio" for function "gpio" [0.234458] Can't analyze schedule () prologue at 80352ab0 [0.288762] rt2880_gpio 10000600.gpio: registering 22 gpios [0.299908] rt2880_gpio 10000600.gpio: registering 22 irq handlers [0.321944] clocksource: Switched to clocksource MIPS [0.334132] NET: Registered protocol family 2 [0.344688] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [0.358567] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [0.371138] TCP: Hash tables configured (established 1024 bind 1024) [0.384158] UDP hash table entries: 256 (order: 0, 4096 bytes) [0.395800] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [0.408731] NET: Registered protocol family 1 [0.424253] rt-timer 10000100.timer: maximum frequency is 3662Hz [0.437813] Crashlog allocated RAM at address 0x1f00000 [0.452939] workingset: timestamp_bits = 30 max_order = 13 bucket_order = 0 [0.476459] squashfs: version 4.0 (2009/01/31) Phillip Lougher [0.488055] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [0.536021] io scheduler noop registered [0.543795] io scheduler deadline registered (default) [0.555903] gpio-export gpio_export: 2 gpio (s) exported [0.566830] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled [0.585516] console [ttyS0] disabled [0.592703] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103 [0.612427] console [ttyS0] enabled [0.626201] bootconsole [early0] disabled [0.643079] cacheinfo: Failed to find cpu0 device node [0.653450] cacheinfo: Unable to detect cache hierarchy for CPU 0 [0.686072] spi spi0.0: force spi mode3 [0.705131] m25p80 spi0.0: s25fl064k (8192 Kbytes) [0.714852] 4 fixed-partitions partitions found on MTD device spi0.0 [0.727573] Creating 4 MTD partitions on "spi0.0": [0.737191] 0x000000000000-0x000000030000: "u-boot" [0.748989] 0x00000003000000xx000000040000: "u-boot-env" [0.761531] 0x000000040000-0x000000050000: "factory" [0.773714] 0x000000050000-0x000000800000: "firmware" [1.748173] 2 uimage-fw partitions found on MTD device firmware [1.760123] 0x000000050000-0x00000019e8de: "kernel" [1.772076] 0x00000019e8de-0x000000800000: "rootfs" [1.783736] mtd: device 5 (rootfs) set to be root filesystem [1.799158] 1 squashfs-split partitions found on MTD device rootfs [1.811646] 0x0000003b8000-0x000000800000: "rootfs_data" [1.825345] libphy: Fixed MDIO Bus: probed [1.842693] rt3050-esw 10110000.esw: link changed 0x00 [1.856048] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5 [1.873699] rt2880_wdt 10000120.watchdog: Initialized [1.886379] NET: Registered protocol family 10 [1.905327] Segment Routing with IPv6 [1.912996] NET: Registered protocol family 17 [1.922093] bridge: filtering via arp / ip / ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [1.948026] 8021q: 802.1Q VLAN Support v1.8 [1.976100] VFS: Mounted root (squashfs filesystem) readonly on device 31: 5. [1.992514] Freeing unused kernel memory: 200K [2.001382] This architecture does not have kernel memory protection. [2.651973] random: fast init done [3.703340] init: Console is alive [3.710717] init: - watchdog - [5.474463] kmodloader: loading kernel modules from /etc/modules-boot.d/* [5.780999] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [5.806529] init: - preinit - [7.693750] rt3050-esw 10110000.esw: link changed 0x00 [8.009922] random: procd: uninitialized urandom read (4 bytes read) [9.334287] rt3050-esw 10110000.esw: link changed 0x04 [9.356277] rt3050-esw 10110000.esw: link changed 0x05 [9.366763] rt3050-esw 10110000.esw: link changed 0x07 [12.004880] jffs2: notice: (337) jffs2_build_xattr_subsystem: complete building xattr subsystem, 9 of xdatum (3 unchecked, 6 orphan) and 95 of xref (8 dead, 0 orphan) found. [12.051264] mount_root: switching to jffs2 overlay [12.121179] overlayfs: upper fs does not support tmpfile. [12.166091] urandom-seed: Seeding with /etc/urandom.seed [12.402586] procd: - early - [12.408634] procd: - watchdog - [13.337518] procd: - watchdog - [13.352925] procd: - ubus - [13.654333] random: ubusd: uninitialized urandom read (4 bytes read) [14.052672] random: ubusd: uninitialized urandom read (4 bytes read) [14.446297] random: ubusd: uninitialized urandom read (4 bytes read) [14.476742] procd: - init - [19.436530] kmodloader: loading kernel modules from /etc/modules.d/* [19.906697] usbcore: registered new interface driver usbfs [19.918141] usbcore: registered new interface driver hub [19.929171] usbcore: registered new device driver usb [20.026060] NET: Registered protocol family 8 [20.034907] NET: Registered protocol family 20 [21.162128] ehci_hcd: USB 2.0 Enhanced Host Controller (EHCI) Driver [21.354763] SCSI subsystem initialized [21.418933] ehci-platform: EHCI generic platform driver [21.440102] phy phy-usbphy.0: remote usb device wakeup disabled [21.452040] phy phy-usbphy.0: UTMI 16bit 30MHz [21.460932] ehci-platform 101c0000.ehci: EHCI Host Controller [21.472534] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1 [21.488687] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000 [21.522004] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00 [21.539412] hub 1-0: 1.0: USB hub found [21.562620] hub 1-0: 1.0: 1 port detected [21.595957] ip6_tables: (C) 2000-2006 Netfilter Core Team [21.724012] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [21.764741] ohci-platform: OHCI generic platform driver [21.775820] ohci-platform 101c1000.ohci: Generic Platform OHCI controller [21.789603] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2 [21.805682] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000 [21.889919] hub 2-0: 1.0: USB hub found [21.910592] hub 2-0: 1.0: 1 port detected [21.956420] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180 [21.972540] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d [21.986819] usb 1-1: new high-speed USB device number 2 using ehci-platform [22.049717] ip_tables: (C) 2000-2006 Netfilter Core Team [22.075001] usbcore: registered new interface driver ipheth [22.138694] nf_conntrack version 0.5.0 (1024 buckets, 4096 max) [22.570209] xt_time: kernel timezone is -0000 [22.589802] usbcore: registered new interface driver cdc_ether [22.719465] PPP generic driver version 2.4.2 [22.734292] NET: Registered protocol family 24 [22.748502] usbcore: registered new interface driver rndis_host [22.817789] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory" [22.832378] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 detected [22.847910] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected [22.863024] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [22.918287] kmodloader: done loading kernel modules from /etc/modules.d/* [30.091247] rt3050-esw 10110000.esw: link changed 0x00 [31.730249] rt3050-esw 10110000.esw: link changed 0x01 [31.779918] rt3050-esw 10110000.esw: link changed 0x05 [31.844923] rt3050-esw 10110000.esw: link changed 0x07 [36.996738] device eth0 entered promiscuous mode [42.250439] rt3050-esw 10110000.esw: link changed 0x00 [42.335920] IPv6: ADDRCONF (NETDEV_UP): wlan0: link is not ready [43.919943] rt3050-esw 10110000.esw: link changed 0x01 [44.005695] rt3050-esw 10110000.esw: link changed 0x03 [44.051269] rt3050-esw 10110000.esw: link changed 0x07 [52.006874] wlan0: authenticate with ba: e0: d9: 25 :: 9b [52.042917] wlan0: send auth to ba: e0: d9: 25 :: 9b (try 1/3) [52.055940] wlan0: authenticated [52.082159] wlan0: associate with ba: e0: d9: 25 :: 9b (try 1/3) [52.112123] wlan0: RX AssocResp from ba: e0: d9: 25 :: 9b (capab = 0x411 status = 0 aid = 1) [52.127942] wlan0: associated [52.134468] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by ba: e0: d9: 25 :: 9b [52.345877] IPv6: ADDRCONF (NETDEV_CHANGE): wlan0: link becomes ready Maybe some more packages are missing? Or something extra)) Installed: Package Name: base-files Package Name: busybox Package Name: chat Package Name: comgt Package Name: dnsmasq Package Name: dropbear Package Name: firewall Package Name: fstools Package Name: fwtool Package Name: hostapd-common Package Name: ip6tables Package Name: iptables Package Name: iptables-mod-ipopt Package Name: iw Package Name: iwinfo Package Name: jshn Package Name: jsonfilter Package Name: kernel Package Name: kmod-atm Package Name: kmod-cfg80211 Package Name: kmod-crypto-crc32c Package Name: kmod-crypto-hash Package Name: kmod-eeprom-93cx6 Package Name: kmod-fs-ext4 Package Name: kmod-gpio-button-hotplug Package Name: kmod-ip6tables Package Name: kmod-ipt-conntrack Package Name: kmod-ipt-core Package Name: kmod-ipt-ipopt Package Name: kmod-ipt-nat Package Name: kmod-ipt-offload Package Name: kmod-leds-gpio Package Name: kmod-lib-crc-ccitt Package Name: kmod-lib-crc-itu-t Package Name: kmod-lib-crc16 Package Name: kmod-mac80211 Package Name: kmod-mii Package Name: kmod-nf-conntrack Package Name: kmod-nf-conntrack6 Package Name: kmod-nf-flow Package Name: kmod-nf-ipt Package Name: kmod-nf-ipt6 Package Name: kmod-nf-nat Package Name: kmod-nf-reject Package Name: kmod-nf-reject6 Package Name: kmod-nls-base Package Name: kmod-ppp Package Name: kmod-pppoe Package Name: kmod-pppox Package Name: kmod-rt2800-lib Package Name: kmod-rt2800-mmio Package Name: kmod-rt2800-soc Package Name: kmod-rt2x00-lib Package Name: kmod-rt2x00-mmio Package Name: kmod-scsi-core Package Name: kmod-slhc Package Name: kmod-usb-core Package Name: kmod-usb-ehci Package Name: kmod-usb-net Package Name: kmod-usb-net-cdc-ether Package Name: kmod-usb-net-ipheth Package Name: kmod-usb-net-rndis Package Name: kmod-usb-ohci Package Name: kmod-usb-uhci Package Name: kmod-usb2 Package Name: libblobmsg-json Package Name: libc Package Name: libgcc Package Name: libimobiledevice Package Name: libip4tc Package Name: libip6tc Package Name: libiwinfo Package Name: libiwinfo-lua Package Name: libjson-c Package name: libjson-script Package Name: liblua Package Name: liblucihttp Package Name: liblucihttp-lua Package name: libnl-tiny Package Name: libopenssl Package Name: libplist Package Name: libpthread Package Name: librt Package Name: libubox Package Name: libubus Package Name: libubus-lua Package Name: libuci Package Name: libuclient Package Name: libusb-1.0 Package Name: libusbmuxd Package Name: libxml2 Package Name: libxtables Package Name: logd Package Name: lua Package Name: luci-app-commands Package Name: luci-app-firewall Package Name: luci-app-samba Package Name: luci-base Package Name: luci-i18n-base-ru Package Name: luci-lib-ip Package Name: luci-lib-jsonc Package Name: luci-lib-nixio Package Name: luci-mod-admin-full Package Name: luci-proto-ipv6 Package Name: luci-proto-ppp Package Name: luci-theme-openwrt Package Name: mtd Package Name: netifd Package Name: odhcp6c Package Name: odhcpd-ipv6only Package Name: openwrt-keyring Package Name: opkg Package Name: ppp Package Name: ppp-mod-pppoe Package Name: procd Package Name: rpcd Package Name: rpcd-mod-rrdns Package Name: samba36-server Package Name: swconfig Package Name: ubox Package Name: ubus Package Name: ubusd Package Name: uci Package Name: uclient-fetch Package Name: uhttpd Package Name: usbutils Package Name: usign Package Name: wireless-regdb Package Name: wpad-mini Package Name: zlib |
Message#3273 04.03.19, 16:40 | |
a guest [offline] Group: Users Messages 1 Check in: 31.01.13 Reputation: 0 | Has anyone managed to make a dir 320 nru b1 reporter or adapter? |
Message#3274 04.03.19, 17:31 | ||
PIONEER [offline] Group: Friendssavagemessiahzine.com Messages 703 Check in: 08.11.11 Reputation: 42 | almaz56 @ 03/04/19 16:40 Has anyone managed to make a dir 320 nru b1 reporter yes .... Keenetic 4G2 is such a mode ... Keenetic 4GII Modes
BUT!!! do not forget - as soon as you switch the repeater mode - the VEB interface of the router will be inaccessible from the address from which it was previously accessible. In order to enter the interface, you will have to enter the VEB interface of the FIRST router (DONOR) and see what IP address the repeater received and enter with this addressSetting up Zuxell Keenetic in repeater mode (WIFI amplifier) Post has been editedzakarya67 - 04.03.19, 17:40 Reason for editing: link -------------------- Noli credere ... noli timere ... ne repetas eMachines eME440 Microsoft Lumia 950 XL, HTC one M7 | |
Message#3275 08.03.19, 19:45 | |
Visitor [offline] Group: Active users Messages 26 Check in: 03.10.13 Sony Xperia XA1 Plus 4/32/64 Reputation: 0 | Hello!!! Advise firmware for D-Link DIR-320 A1 to connect tel via USB. on android as a 4G modem. Thanks in advance. |
Message#3276 08.03.19, 19:56 | |
Experienced [offline] Group: Friendssavagemessiahzine.com Messages 588 Check in: 11.07.12 Reputation: 67 | almaz56 @ 03/04/2019, 16:40 Has anyone managed to make a dir 320 nru b1 reporter or adapter? As I was answered before, I also implemented this desire, in the end I put openvrt, DD and even collected Padovan .. what interests? .. I’ll say that he is not very good as a repeater .. the reinforcement does not live up to expectations, yet age processor "Unreleased" .. but my version is A1 Post has been edited-Gringo- - 08.03.19, 19:57 |
Message#3277 10.03.19, 07:40 | |
a guest [offline] Group: Users Messages 6 Check in: 11.06.17 Reputation: 0 | The answer to my # 3272: From the Soviet Information Bureau)): I could make friends with the iPhone usb router as a modem! this one helpedhttps: //forum.openwrt...l-driver-fails/16973/3article and helped to better understand what plugginghttps: //git.kernel.org...a6410c7dcb86cf3f28d3b1this. When you turn on the iPhone in modem mode, install all the packages, configure the WAN and the firewall - the Internet may not be present and the router in the kernel log will write ipheth_tx_timeout: TX timeout ..., Then turn off the modem mode on the phone and immediately turn it on, on the request "Trust" - press - "Trust" and voila the connection appears and everything plows !!! it's all about usbmuxd work that needs to be done somehow so that it starts later when everything else has already been downloaded. But it's not difficult for me to make on-off modem mode (for now :))) Posted 10/03/2019 07:42: Karlqw @ 03/08/19, 19:45 Hello !!! Advise the firmware for D-Link DIR-320 A1 to connect the phone via USB. on android as a 4G modem. Thanks in advance. I managed to do it on dir320 B1 with firmware 06/18/1. Post has been editedAntonnur07 - 10.03.19, 07:43 |
Message#3278 10.03.19, 14:43 | |
a guest [offline] Group: Users Messages 1 Check in: 10.03.19 Reputation: 0 | I am writing to read the message 1467 |
Message#3279 11.03.19, 00:49 | |
Visitor [offline] Group: Active users Messages 26 Check in: 03.10.13 Sony Xperia XA1 Plus 4/32/64 Reputation: 0 | Antonnur07 @ 03/10/19, 07:40 Karlqw @ 03/08/19, 19:45 Hello !!! Advise the firmware for D-Link DIR-320 A1 to connect the phone via USB. on android as a 4G modem. Thanks in advance. I managed to do it on dir320 B1 with firmware 06/18/1. Like on dir320 A1 there is no firmware 06/18/1. |
Message#3280 12.03.19, 23:13 | |
PIONEER [offline] Group: Friendssavagemessiahzine.com Messages 703 Check in: 08.11.11 Reputation: 42 | There is a DIR-320B1 with firmware Keenetic4G2 with the latest version of the firmware (c7) .... on the promptness blocked FACTORY. Now I just can not remove the lock. Roll back to the stock d-link. Re-put the kinetics of the factorial mode - but the variables remain the same as the one that was changed. Question - how to unlock -------------------- Noli credere ... noli timere ... ne repetas eMachines eME440 Microsoft Lumia 950 XL, HTC one M7 |
Message#3281 12.03.19, 23:22 | |
PIONEER [offline] Group: Friendssavagemessiahzine.com Messages 703 Check in: 08.11.11 Reputation: 42 | Antonnur07, such novels should be hidden SPOILER UNDER SPOILER Post has been editedzakarya67 - 12.03.19, 23:23 -------------------- Noli credere ... noli timere ... ne repetas eMachines eME440 Microsoft Lumia 950 XL, HTC one M7 |
| mobile version | Now: 05/26/19 00:30 |
©savagemessiahzine.com2005-2019. All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement