1) From the outset, install the driver:
http: //savagemessiahzine.com/forum/dl/post/392130/LGSPUSBDriver_Eng_Ver_2.0.rar Then download
LGDP2_pack.rar (9.37 MB)
2) Ustanavlivaem archive LGDP2_pack LGDP2_V35__FLASHER LGDP2_31_INCLUDE_LGDP1_Setup key file in a text document is next, enter it.
3) Copy the folder with the installed program file from the archive LGDP2_V35__FLASHER called LGDP2_V35_UMTS.
4) We go in there and create GM730_090708_MP models folder and it GM730.
5) In the C: \ DOWNLOAD \ models \ gm730 insert and ask downloaded file from the archive called GM730_090708_MP
6) Enter the phone
Emergency mode (When turned off, hold keys together: Volume Down + volume up and hold them, click on the power button).
7) Connect your phone to a computer and install new equipment.
8) Go to the control-system-controller Start-panel USB device controllers and see which port is connected to your phone. (It means something there lg emergency mod ...) COM42 for example. This value is stored.
8) take out your phone. To avoid mistakes, it is better to disable usb by phone, and the cable is left on the computer.
9) Go to C: \ DOWNLOAD \ and run LGDP2_V35_UMTS
10) In the first window, we press OK.
11) In the second window, select the com port (which you memorized in paragraph 8), in line ddl selection, select the file C: \ DOWNLOAD \ models \ gm730 \ GM730_090708_MP.dll, in ddl infor lines are selected in the firmware dz format Hit ok.
12) Click Start, connect the phone and raise the hands up without touching anything. Two or three minutes of waiting, the phone sewn and turned on after the flashing itself. Now you can give up and close.
13) After the flashing do Hard rezet.