[X]Assistant

[Johnny P]

Help and tips on self-repair devices
PDAs, communicators, phones, smartphones, UMPC, laptops, PSP, navigators, photographic equipment, etc.
General catalog disassembly devices | Schemes and service of PDAs | Amplifier design FAQ | Where to buy spare parts for equipment

Useful tips - must-read

Attention!It is important to understand that you perform all operations on the device at your own risk!
At the same time - you lose the manufacturer's warranty and you can ruin the device completely!
Sitesavagemessiahzine.comdoes not bear any responsibility for the materials and advice published here, as well as for the result of using them.

The curator of the topic isInfe [R] noS
All suggestions regarding the caps, please send toQMS

Post has been editedstp101 - 23.04.18, 22:40

Reason for editing: New header. AndrewP_one rule cap

[e-kurtis]

All a pleasant time of the day!
Please tell me which joystick fits on the Glofiish X800.
from NOKIA 3250 and SE does not fit ...
Thanks for attention!

[MUFLON85]

E-kurtis @ 16.4.10, 14:51

All a pleasant time of the day! Please tell me which joystick fits on the Glofiish X800. From the NOKIA 3250 and SE… not suitable ... Thank you for your attention

So it seems only from eten and fits

[ChiPToP]

Good afternoon, please tell me how to independently replace the Apple iPhone 3G speaker cable?

[drum1k]

ChiPToP,
Perhaps usefultyts

[ChiPToP]

drum1k
Thanks for the link, but there is not enough information there, how to do everything and do nothing at all ..

[drum1k]

ChiPToP,
Take as a basis the video instructions for analysis. And then what follows the link.

[pasha_550]

ChiPToP
PDA schemas and service manuals (Post # 4280112)

[ChiPToP]

drum1k, pasha_550
Thanks for the help, figured out.

M

5.1. If a forum member gave you good advice that helped you solve your problem, do not post a message with the text “Thank you! You are super!!!". On our forum, it is customary to express gratitude by raising the reputation of a particular participant.
5.2. The reputation of other participants can be influenced by any user who has collected 15 useful posts. If you do not have 15 helpful posts, ask the moderator to raise the reputation of the person who helped you through the button "Complaint

Post has been editeddrum1k - 21.04.10, 23:33

[proFC]

please tell me, the nest of the ears fell out, I decided to replace it from 2.5 to 3.5. Everything would be fine, but I plugged it in wrong, a mono signal goes to the ears, it plays both ears, but the left one is louder. Stereo-both, but it's not pleasant to listen to. And the kmk speaker still does not play with the ears turned off!

Attached images

Post has been edited>student< - 01.05.10, 11:20

[Hanzo]

>student< @ 1.5.10, 10:18

And the kmk speaker does not play when the ears are disconnected! The diagram below

For in the standard input there is a "headset presence" relay.Example.

[rinat_pro]

Themselves recruited * # 0 * # 0

ginza ms100
Description of the problem:
Such a business, the headset jack with roots came off, I made everything by hand, assembled, turn on the sound, but the phone dials without stopping not shorted

There have been actions:
I peeled off the film from the keyboard, looked at the contacts, everything is clean.

[pasha_550]

rinat_pro @ 9.5.10, 0:31

non-stop phone dials * # 0 * # 0

And now, if you look at the keyboard, no thoughts appear? :)



And so? :)



Look around for snuffles - most likely, the row in the matrix is ​​closed ... well, or it is incorrectly soldered ...

[rinat_pro]

And unless there where I soldered it not concerns a sound ??
I like the scheme she wore nor sideways to the keyboard like even close

And where about to look for short-circuit on the board, then that soldered everything back soldered but still the same ...

Post has been editedrinat_pro - 09.05.10, 10:03

[pasha_550]

rinat_pro
Do not go anywhere, now I'll come up - we'll see together ...: D
Well, how do I know ... look ...
And not necessarily kz ... maybe vice versa - there is no contact ... As you know, electrical engineering is the science of contacts and their absence ... :)

[MiDash]

Hello, good people!

ASUS P535, white screen. Visible via USB, accepts calls, ActiveSync works, buttons seem to be working.XP (up + reset), as far as I can tell, works fine, but does not help.No, it did not work. By USB, I threw the file into \ Documents and Settings, made XP, but the file was not erased. Do I learn to do XP, or learn to check?

Can anyone say if this is exactly the display, or something else could be to blame? I thought up to change the display, but it's a shame if it's not about him.

But the program is not needed - "flashlight".

Post has been editedMiDash - 13.05.10, 21:25

[Johnny P]

MiDash,Learn to do XP. As I recall, you need to keep the reset for a long time.

[MiDash]

Yes, I did wrong. You had to press the green button to confirm. It is difficult to blindly something!

Found a cliphttp://www.youtube.com/watch?v=s9aPl-GJNSc

I'll get it - I'll try.

[CJ1]

All the good time. Help solve the problem. Raccoon M750. The sound fell off. That is, no. The call accepts, goes vibro. There is no sound either on the external speaker or on the conversational one. I speak into the microphone - on the other phone silence. Playing audio files also gives only silence. Moreover, the brakes are added. The animal thinks somewhere for half a minute before doing something. Switching to vibro eliminates the brakes.
Who will tell you what the problem is? How to solve it? Is it really only resuscitation in the SC that will save the animal?
HardReset did not help. Restore status from SPB Backup too.
Py.Sy. There is no sound in the headset either! I tried to turn on the FM tuner - silence.

Post has been editedCJ1 - 14.05.10, 14:12

[tortilla]

Hello! I have such a trouble-samsung i900 was filled with sweet coffee. At first, the touch refused. The device was reloaded on a circle. The body was again disassembled, the oxide was removed from the contacts, but this did not solve the problem. This reception is from oh no funktsioniruyut.Kogda off all of the buttons, the reception-rebound rabotayut.Kto can give advice that can be done in this situation?

[MiDash]

I tried. Now the file is missing. Did not help.