Download from. site HTC sync 3.0 and click on the sync button with Outlook. Or:
The first way: First you need to synchronize your phone with MSOutlook. Then in Outlook we run "import \ export - export to file - values ​​separated by commas (Windows)". As a result, get the file ***. Csv. Then in the gmail account in the contacts tab, click "Import" - in the upper right corner of the tab. Specify the path to the ***. Csv file. thank Misareg
Second way , thank hjugo

Third way :
Another way to transfer contacts from WM to Android and sync.

- you need to download the folder " Media "and throw it into the root of the memory card.
UPD. If you can not download - copy the link and paste it into the address bar. Automatic transition does not work.

- on Androyd after installing many games, they require additional content (cache), they extort from the Internet. Without this content, the game starts and every time you start will offer download content from internet. Accordingly, if you have no connection on Wi-Fi, then, not to grow old and do not splurge on a GPRS traffic puts a cache for the game in a special folder. If Wi-Fi is, then you start the game, and the offer to download additional content answer in the affirmative. For example, for running games Asphalt must deflate from an Internet 95 mb.

1) if you don’t tick "Use for this action by default", then the shell change can be called by pressing the hard button in the form of a house and selecting the desired shell
2) if you put a tick "Use for this action the default", the default will load the selected shell, and by pressing the hard key in the form of the house will appear miniatures all desktops. And in order to again make it possible to select skins, you must go to Settings \ Applications \ Application Management \ LauncherPro (if the default LauncherPro selected) and clear the default values. If selected Sense, then you need to go to Settings \ Applications \ Application Management \ Sense and just clear the default.

* .android_secure
* Android
* LOST.DIR
* cache
* data
* media

* system.ext2
* data.img
* initrd.gz
* ts-calibration
* zImage
* rootf
* tartup.txt
* CLRCAD.exe
* haret.exe
* FSCK0000X (there may be many)

- Android builds change the MAC address of the HD2 adapter

The explanation is very simple - in its current form, Android writes all its data to image files, and specifically in data.img. If it was at the stage of the first installation created with a size of 250MB, then that’s what you’ll have available.
Options to increase 3:

1) Downloadhttp://www.hallerud.se/htc_ime_jonasl_hires22_27.zip
2) From the archive we take HTC_IME_hi22.apk
3) We drop it on the card, set it in a way that is familiar to us - for example, through a file manager, such as ASTRO
4) Go Menu->Settings->Language and keyboard set daw HTC_IME mod. We spit on the warning - the way is exactly safe, because fully open and made by the XDA community.
5) In the same place we go in HTC_IME mod->Language keyboard and choose Russian. I also draw attention to the fact that in this mode additional settings are available - but here you can figure it out yourself
6) Now on any input field we pinch the finger. In the menu that appears, select the item "Input Method" and HTC_IME mod. As a result, we get an improved keyboard with comfortable smiles and without a bug.

Before downloading the OS, copy the * .apk file to the Storage Card \ Android \ AndroidApps folder, where by "Storage Card" is the name of your memory card in the system, by "Android" is meant the name of the folder that contains the android assembly. Another way:

Not. HTC HD2 at the hardware level can not display more than 65 thousand colors, since it has a 16-bit cable connected to the screen.

The first way.
Edit the build.prop file that is in root / system
Open it with any text editor and change ro.sf.lcd_density = 200 to ro.sf.lcd_density = 240 (this can be done, for example, in the file explorer root explorer (open in text editor)
lcd_density is a parameter that allows you to change the resolution of the interface (the "density" of interface elements). Its standard value is 240.
Second way
In the Spare Parts program, in the last menu item, remove the 'Campatibility Mode' checkbox and reboot.
Third way
Download from Market orfrom hereDencity changer and change the density parameter to the desired value using it.

1) Format the card.
2) At the root of the card, we dump any assembly that works from the card (Android OS SD)
3) Create an Android folder (or better open on your computer startup.txt and look there in what directory the files should be transferred), move it to: system.ext4 and any file with the .img extension
4) zImage, initrd, startup.txt and other files including the Root folder if it is left in the root. And then we just connect the phone to the computer and it will boot up with the new build =)) Depending on the build, you will have to wait while the bootloader creates the ext4 and img files ....

The first launch is quite long, but not more than 10 minutes. The second and further - 2-3 minutes.

line
with your poppy in startup.txt (it should not depend on the register, but it doesn’t work with capital letters for some, it’s better to write small)

Try to change the line in startup.txt:
or vice versa. Complete removal of all information from a memory card and formatting it from a computer in FAT32 can also help.

When you first start creating an image of the internal memory device (data.img), which takes up so much space. The amount of data.img created determines the amount of internal memory that will display android, and which will be used by the system.

Press and hold your finger on the empty space of the desktop, a pop-up menu will appear. In this menu, select "Widgets / Widgets". From the list of installed widgets, select the desired one.

- replace root explorer with the file /system/media/bootanimation.zip (if it is not there, then system / customize / resource / bootanimation.zip) with any other

Normal consumption in sleep mode within 4-9 ma

It can be produced in 2 ways:

2.1 Automatic replacement (does not work on all new kernels, especially test ones).
We load WinMobile, we connect the phone in the card reader mode to the PC, copy the zImage core file into the "\ Storage Card \ Android" folder with the replacement of the old one.
Modules * .ko put in the folder \ Storage Card \ Android \ root \ system \ lib \ modules. If the folder does not exist, create. We load the Android, we check files.

2.2 Manual file replacement (in case the automatic did not work. This is usually expressed when the camera is idle or Wi-Fi).
We throw the contents of the downloaded archive with the kernel on the memory card (it is possible both under Android and under Windows, at your discretion).
After downloading Android, using the RootExplorer program or a similar zimage file we throw into the Android folder, after deleting the old one.
Modules * .ko are copied to the system / lib / modules folder, after deleting the old ones.
We do a complete reboot of Android.

1. Put a clean assembly from the cap.
2. downloaded the kernel you need, put it in any way on a memory card (not in Android, you can, I have the Program for Android folder for these purposes)
3. We went to the Android, opened the ES-conductor there on the left triangle, in it pressed the Win key (middle button of the five at the bottom of the phone) ->Settings->at the bottom of the "ROOT right" ->put both jackdaws (choose HiAPK).
4. Came out of the settings in the ES-conductor, checked the path, there are 2 of them: a memory card - in the upper left corner of the ES-conductor, respectively, should be "/" with a path above it "/ sdcard", and not a "House" with the path "/ "is the internal memory of the phone. Switched by clicking on the icon "/").
5. Found the kernels you downloaded (MDJ-S7 _ **** _ *****) (search on the "/ sdcard" card).
6. Standard manipulations with a long tap (hold) on the desired file: copy the zimage from the archive and paste with the replacement along the path / sdcard / Android (to the root of the folder).
7. The same manipulations with the three * .ko files, but they need to be written into the main memory (click on the "/" in the ES-Explorer) along the path "/ system / lib / modules /"
8. The same manipulations with the * .so file, it also needs to be written into the main memory (click on the "/" in the ES-Explorer) along the other path "/ system / lib / hw /". Path hints specifically in the Kernel Archive (where the file sits).
It is advisable to save somewhere the original file along the path /system/lib/hw/ligths.qsd8k.so
9. When you exit the ES-Explorer, it is unforgettable to disable Root-rights (remove daws), otherwise there will be problems with the "opening" of the card (maybe something else).
10. FULL RESTART (not Hot-Reboot).
EVERYTHING should work!