SSPL_RUU.zip (755.47 KB)
To install some custom firmware on PCT devices, it is not for all firmware, descriptions look in the header of the selected firmware.
Add. description.USB_drivers.zip(28.77 KB)
If you drove the device into the mattress, connected to the BB, and the drivers are not automatically installed, then download these and install them.
HSPL2_RUN.rar(916.27 KB)
Early version of HSPL from
bepe and
Cotulla , only for European devices.
HSPL3_PKG.rar(693.21 KB)
frombepe and Cotulla , it is intended both for European phones, and for American from T-Mobile. HSPL4.zip(1.41 MB)
Installation Instructions.To install HSPL, there must be any SPL version from this list in the device:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
SPL 3.03.0000
Otherwise the installation will fail!
This HSPL is released for WM 6.5 users to ensure compatibility with firmware based on official 3.XX ROM. 3.03 SPL supports LEO1024.
Android / WP7 / MAGLDR do not support HSPL3.03 / OSPL3.03. You must install HSPL2.08 to start Android / WP7 / MAGLDR.
HSPL 3.03 does not support 576 MB of RAM, there will be only 448 MB.
HARD SPL2 by Cotulla
Read carefully before installation!
1) To install this HSPL on your device must be SPL 1.42.0000 (only concerns HSPL2 ).
Otherwise the installation will fail!
To check the SPL version, hold the volume down button and reset.
If you have an older SPL version, flash the official ROM from your device.
2) Features
- Security level = 0, you can see all the commands available in the device (for developers).
- This HSPL will not be overwritten when flashing the whole NBH with SPL through RUU.
- There is no verification of the NBH file signatures, so you can flash the device with non-signed firmware, that is, custom.
3) Warranty issues
Installing HSPL may void the warranty.
If you send the device to a service center, make sure you remove HSPL!
4) Delete
The only way to remove HSPL is to flash the original SPL from the memory card.
- Take any "RUU_signed.nbh" from the original firmware.
- Rename it to "leoimg.nbh"
- Flash through the bootloader.
5) All
This product can be used freely, but at your own risk. We do not take
liable for any conflicts, failures, or damages caused by this procedure.
We do not give any guarantees!
Crack for HD2 WWE firmware the authorsZeratyl and XAOC747 Rom Update Utility Flasher, interface language ENGTask29 A tool for formatting memory allocated for ROM.Paging changeProgram to change the paging (PP) in the firmware [/ url]
How to flash Hard SPLHow to flash ROMFAQ on firmwareList of errors during flashingCalibration battery How to calibrate acb.