“It is enough to process all the metal parts of a computer that is immersed in a distillate with protective chemically neutral heat-conducting material, such as galvanizing the body ..”
“Aging or deterioration of the insulating oil, usually associated with oxidation. When oxygen and water appear in the oil, the insulating oil oxidizes even under ideal conditions. ”
“With proper maintenance of the cooling and insulation systems, the age of operation of the insulation system can be increased from 40 to 60 years.”
“Transformer oil can be completely restored (REGENERATION) and made as new.”
“When heated, the oil expands, to compensate for the expansion it is necessary to create an expansion tank”
“And I also noticed that the plexiglass became very brute, it cracks when screwing the lid, although when assembling it a year ago, it pulled a lot harder, and all that could happen is the folding of the thread, and now pieces already fly off”

but if you make a geomitic case, then the radiator will have to be half out of place, otherwise the efficiency will tend to 0.

throw away the case. The computer worked like this for me (with guts), that is, the motherboard was torn from the case together with the mounting panel, connected all the modules (video, network, etc.) to it and put it on the cabinet, chopped it up with long loops (through adapters: claudia, monitor and mouse) it is important to fix the cords (you suddenly jerk and tear out, for example, a video card from a working computer) so that when jerking they would not affect the position of the boards in the mother, I also threw the screws on the cabinet (the cabinet was in the cabinet) the computer stupidly did not managed to bask. The only thing you need to conduct the wires normally is that this case does not crash. Well, the drawback is that if you need to insert the Compact there, you had to climb onto the cabinet (put it on the cabinet because it wouldn’t be dropped from the table and not wet inadvertently (in general, for safety, there it was dry and comfortable for him) he didn’t take off the cooler, plus the cooler needed to be cleaned of dust ... I thought my mother generally screwed it to the wall with the truth, I really didn’t get to that. In general, he worked for me for more than half a year, maybe he would have worked more but had to collect it s in the box (in housing) for other reasons ...

sistemnik in transformer oil

Especially good in the transformer oil or other liquid will feel the disks ... Given the fact that they have an interior, by definition, unpressurized

What any repair-upgrade and maintenance of this unit, replacement and regeneration of oil!

like water

as I did, that would be cooling and quiet:

Then NO FLOW! The comp in the aquarium is cool ... Kstai remembered, even on the discovery in English, I looked like a TV set in the aquarium, I started ... I didn’t understand much, the language was even worse than I knew, but there the liquid was absolutely transparent, water!

This is nonsense)) Conditionally old video, 1 GB of RAM and even not two cores - there is nothing to cool. A quiet cooler for a central processing unit, a good power supply is all that can be used, not very expensive, and without much headache.

Putting in a sealed box - the air heats up and comes .... to cool the air with something you need, that is, a heat exchanger.

heated dog! even without a side cover cuts down after half an hour of good work!

Shl you only one case will cost a pretty penny

Conclusion: 4 coolers and everything is fine. This whole pile of metal eats around 1.5-2.2 A of the power grid.

p.s. other types of cooling please do not offer

so far other types of cooling do not interest me .. I want to find out the possibility of creating a working machine in transformer oil ..