Xiaomi Mi Max 3 - MIUI Firmware
QDLoader HS-USB Driver.zip
MiPhone20151028.exe
under the messages to which you want to add links. Tell me who was updated on Miprom 11.8, with you with an increase in the font icons, also increase? I do not know how to defeat this nasty ...
letyn2463, Yes, it is all this on this repack.
Xiaomi Mi Max 3 - Miui Firmware (Post Lexey77 # 78823638)
Change DPI with hands in ADB ...
adb shell wm density xxx
where xxx is your dpi.
native351 DPI and permission 1080 x 2160.
Post has been editedCitizen yuri - 10.11.18, 16:19
san2009, It may be like this:
1. Go to the recovery
2. In the recovery, select MI Asystem (bottom item, if in Chinese)
3. On PC Run MI PC Suite
4. Connect the device to PC
5. In the MI PC Suite on the UPDATE tab, select R.Flash
6. MI PC Suite will determine the device and offer to download and install the last Chinese firmware
Post has been editedwqbpw - 10.11.18, 16:44
serg8616 @ 11/10/2018, 17:45
Does anyone have a mod on 8.11.8 hours in the center?
What firmware? On MUIPRO in the notification settings and status bar in the status bar, the location of the IOS or AOSP icons.
Post has been editedSimich07 - 10.11.18, 18:00
Guys today meLooseUnlock, and I will first sew Xiaomi.
It is worth Global Stable 10.0.1.0, the loader, respectively, 4, not going to go around, I am going to sew the latest world or MPRO.
And it seems that everything from the cap and experience of the firmware of other brands is clear, except for one.
If, after firmware, the SWRP immediately format the body and sew a localized caste, whether to be afraid of the DATA encryption, to sew the root (which I don't really need me)?
It is worth Global Stable 10.0.1.0, the loader, respectively, 4, not going to go around, I am going to sew the latest world or MPRO.
And it seems that everything from the cap and experience of the firmware of other brands is clear, except for one.
If, after firmware, the SWRP immediately format the body and sew a localized caste, whether to be afraid of the DATA encryption, to sew the root (which I don't really need me)?
Startmen @ 11/10/18, 20:35
And what are afraid of encryption?
If I, as on the old Samsung laptop 3, putting the recovery, just format, everything and I can't caste from the card, will there be surprises?
And then in the header a lot of red font: D
Startmen @ 11/10/18, 20:39
Everything is stupid through mythlesh se
Hello, dancers with a tambourine. Also decided to dance, it took Ruth.
Uploaded the recovery, and there "Mi-Recavauri 3" in Chinese. I decided to put TWRP. Swim firewood from the header. On the computer it is worth the XP, the body sees. On the body in extended included:
Developer mode,
OEM unlocking,
USB debugging.
Loading in the fastbut, I start the batch file, the phone code appears and that's all. TWRP is not installed. I tried twice, I waited for a minute and a half - no reaction.
What could be the problem? Thanks in advance.
Uploaded the recovery, and there "Mi-Recavauri 3" in Chinese. I decided to put TWRP. Swim firewood from the header. On the computer it is worth the XP, the body sees. On the body in extended included:
Developer mode,
OEM unlocking,
USB debugging.
Loading in the fastbut, I start the batch file, the phone code appears and that's all. TWRP is not installed. I tried twice, I waited for a minute and a half - no reaction.
What could be the problem? Thanks in advance.
Instructions in the header I read and did on them. Did not work out. Therefore, I ask.
If I had not written a lot of letters, then it would be imposed that there is little information and it is necessary to indicate what I did.
If I had not written a lot of letters, then it would be imposed that there is little information and it is necessary to indicate what I did.
Set of firmware and instructions for MI MAX 3 (Nitrogen)
All the instructions are written for an unlocked bootloader!
All the instructions are written for an unlocked bootloader!
Utilities and applications
savagemessiahzine.com | Platform-tools (adb / fastboot) | r.30.0.5 | Windows (If you have problems using r.29.0.6)
savagemessiahzine.com | Platform-tools (adb / fastboot) | r.29.0.6 | Windows
savagemessiahzine.com | Platform-tools (adb / fastboot) | r.23.1.0 | Windows (Support XP)
Hashtab � file checksum utility
savagemessiahzine.com | Platform-tools (adb / fastboot) | r.29.0.6 | Windows
savagemessiahzine.com | Platform-tools (adb / fastboot) | r.23.1.0 | Windows (Support XP)
Hashtab � file checksum utility
Firmware
Official
Build based on official
Archive assemblies on the basis of official
Global
Firmware with pre-installed GApps. Of the languages ​​- Chinese, English, Russian, Ukrainian, and many bourgeois.
Stable firmware
Stable firmware
Russia
Firmware with pre-installed GApps. Of the languages ​​- Chinese, English, Russian, Ukrainian, and many bourgeois. The main difference from Global is the pre-installed software for the local market (Yandex, etc.) and more rare updates.
Stable firmware
Stable firmware
China
Firmware with pre-installed Chinese applications and services. Of the languages ​​- Chinese and English, no Russian.
Stable firmware
Stable firmware
Build based on official
xiaomi.eu
mi-globe
"Constructor" based on xiaomi.eu assemblies.
Select the appropriate build options and pressCreate ROM
Firmware on the project website
Select the appropriate build options and pressCreate ROM
Firmware on the project website
greeshan
Archive assemblies on the basis of official
Step by step instructions are not! We use one or the other depending on the needs, for example:
* The bootloader is unlocked, installed firmware via fastboot, you need to install only rekaveri - 3.1.1
* The bootloader is unlocked, installed firmware via fastboot, you need to install Magisk - 7.1.1
1. Check the status of the boot loader
1. Swinging Platform-tools (adb / fastboot) (spoiler Utilities and applications ) and unpack the contents of the archive into an empty folder on your PC / laptop
2. We transfer the smartphone to the mode fastboot (turn off, hold down the power and volume buttons minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop
3. In the file folder adb / fastboot we clampShiftand by pressingright mouse buttonchoose Open command window
4. In the console window that opens, sequentially type the commands
� If a fastboot gives out Device unlocked:true - loader unlocked
� If a fastboot gives out Device unlocked:false - loader blocked by
2. We transfer the smartphone to the mode fastboot (turn off, hold down the power and volume buttons minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop
3. In the file folder adb / fastboot we clampShiftand by pressingright mouse buttonchoose Open command window
Screenshot
4. In the console window that opens, sequentially type the commands
fastboot devices
fastboot oem device-info
fastboot oem device-info
Screenshot
� If a fastboot gives out Device unlocked:true - loader unlocked
� If a fastboot gives out Device unlocked:false - loader blocked by
2. Installation of the official firmware
1. Swinging Platform-tools (adb / fastboot) (spoiler Utilities and applications ) and unpack the contents of the archive into an empty folder on your PC / laptop. It is recommended to create a folder in the root of the local disk and specify a simple name (for example, 111)
2. Downloading firmware (spoiler Firmware version for fastboot ) and unpack the folder with files adb / fastboot . Unpack necessary so that the list of files in the folderaboutmatched the screenshot below (the number of files may differ in the end, depending on the firmware version):
3. We transfer the smartphone to the mode fastboot (turn off, hold down the power and volume buttons minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop
4. In the file folder adb / fastboot run flash_all.bat
You cannot use the flash_all_lock.bat batch file ("flash and lock the bootloader") when installing the official (Global / Russia) firmware on the Chinese version of the smartphone
You can use Flash_all_lock.bat Batnick ("flash and block download") when moving between official (Global / Russia) firmware on the global version of the smartphone
5. Wait for the reboot and disconnect the smartphone
2. Downloading firmware (spoiler Firmware version for fastboot ) and unpack the folder with files adb / fastboot . Unpack necessary so that the list of files in the folderaboutmatched the screenshot below (the number of files may differ in the end, depending on the firmware version):
Screenshot
3. We transfer the smartphone to the mode fastboot (turn off, hold down the power and volume buttons minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop
4. In the file folder adb / fastboot run flash_all.bat
You cannot use the flash_all_lock.bat batch file ("flash and lock the bootloader") when installing the official (Global / Russia) firmware on the Chinese version of the smartphone
You can use Flash_all_lock.bat Batnick ("flash and block download") when moving between official (Global / Russia) firmware on the global version of the smartphone
If running flash_all.bat error occurs "Missmatching image and device" or "Current device antirollback version is greater than this package"
⚹ Open the batch file with any text editor
⚹ Remove the upper unit to the line
⚹ Save the changes and run the batch file again.
⚹ Remove the upper unit to the line
fastboot% * erase boot || @echo "Erase boot error" && exit / B 1
⚹ Save the changes and run the batch file again.
If after starting flash_all.bat the console window opened and immediately closed
⚹ We start the console through Win + R (in the opened window type cmd)
⚹ Go to the file folder adb / fastboot
⚹ Drag the batch file to the console window and press Enter
⚹ Go to the file folder adb / fastboot
cd C: \ 111 \
⚹ Drag the batch file to the console window and press Enter
5. Wait for the reboot and disconnect the smartphone
3. Install / Update TWRP
3.1. installation
3.1.1. fastboot
1. Swinging Platform-tools (adb / fastboot) (spoiler Utilities and applications ) and unpack the contents of the archive into an empty folder on your PC / laptop. It is recommended to create a folder in the root of the local disk and specify a simple name (for example, 111)
2. Swinging archive and unpack its contents in the folder with the files adb / fastboot
take any other rekaveri If desired format from .imgupdated list, Rename ittwrp.img and copy the replacement to the folder
3. We transfer the smartphone to the mode fastboot (turn off, hold down the power and volume buttons minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop
4. In the file folder adb / fastboot run flash_twrp.bat and wait for the launch of TWRP
We allow to modify the System if it is asked about this when launching TWRP!
5. Enter the password to lock the screen to decrypt the data, and access to the internal memory. If the password has not been set in the system or rekaveri not support decryption - Using MicroSD / USB Flash through OTG for further operations
6. Copy to the root of the internal memory (for the convenience of searching in TWRP) twrp.img and Dm-Verity & ForceEncrypt Disabler and disconnect the smartphone
7. Install Install Image âžž choose twrp.img âžž section Recovery âžž set | Reboot âžž Recovery
8. Install âžž choose Dm-Verity & ForceEncrypt Disabler âžž install
9. Reboot âžž System
2. Swinging archive and unpack its contents in the folder with the files adb / fastboot
take any other rekaveri If desired format from .imgupdated list, Rename ittwrp.img and copy the replacement to the folder
3. We transfer the smartphone to the mode fastboot (turn off, hold down the power and volume buttons minus, after the vibration release the power button and wait for the picture with the hare to appear). We connect it to a PC / laptop
4. In the file folder adb / fastboot run flash_twrp.bat and wait for the launch of TWRP
We allow to modify the System if it is asked about this when launching TWRP!
5. Enter the password to lock the screen to decrypt the data, and access to the internal memory. If the password has not been set in the system or rekaveri not support decryption - Using MicroSD / USB Flash through OTG for further operations
6. Copy to the root of the internal memory (for the convenience of searching in TWRP) twrp.img and Dm-Verity & ForceEncrypt Disabler and disconnect the smartphone
7. Install Install Image âžž choose twrp.img âžž section Recovery âžž set | Reboot âžž Recovery
8. Install âžž choose Dm-Verity & ForceEncrypt Disabler âžž install
9. Reboot âžž System
3.2. update
3.2.1. fastboot
TWRP update viafastboot no different from the installation. Just rename the desired image to twrp.img and move it with the replacement in the folder with the files adb / fastboot
3.2.2. TWRP
1. We connect the smartphone to the PC / laptop, copy to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) the desired image and disconnect it. Or download this image directly via smartphone
2. Install Install Image âžž choose the image of TWRP âžž section Recovery âžž waiting for the end of the process
3. Reboot âžž Recovery
We translate the smartphone in TWRP
⚹ Turn off
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
2. Install Install Image âžž choose the image of TWRP âžž section Recovery âžž waiting for the end of the process
3. Reboot âžž Recovery
If at this stage the smartphone hangs on the Mi logo
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
⚹ After the vibration, release the power button and wait for the launch of TWRP
4. Installation / update the build on the basis of official
4.1. Installation based on the official build
It is highly recommended to install the firmware copied to MicroSD / USB Flash in order not to get a smaller amount of free internal memory!
1. Downloading firmware (spoiler Firmware )
2. Check the MD5 firmware after downloading. Perfect for this purpose. Hashtab (tab in the file properties)
3. Install TWRP according to the instructions 3.1.1 (Except points 8 and 9)
4. Wipe ➞ Format Data (Confirm input format yes )
5. Wipe ➞ Advanced wipe âžž section Cache (the remaining sections will be overwritten by the firmware installation script)
6. Reboot âžž Recovery
7. Configure TWRP (language selection, time zone setting, etc.)
8. Copy the firmware to the root of USB Flash and connect via OTG-cable. Either we connect the smartphone to the PC / laptop, copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone
9. Install âžž choose firmware âžž tick on reboot after installation âžž wait for the end of the process
1. Downloading firmware (spoiler Firmware )
2. Check the MD5 firmware after downloading. Perfect for this purpose. Hashtab (tab in the file properties)
3. Install TWRP according to the instructions 3.1.1 (Except points 8 and 9)
4. Wipe ➞ Format Data (Confirm input format yes )
5. Wipe ➞ Advanced wipe âžž section Cache (the remaining sections will be overwritten by the firmware installation script)
6. Reboot âžž Recovery
If at this stage the smartphone hangs on the Mi logo
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
⚹ After the vibration, release the power button and wait for the launch of TWRP
7. Configure TWRP (language selection, time zone setting, etc.)
8. Copy the firmware to the root of USB Flash and connect via OTG-cable. Either we connect the smartphone to the PC / laptop, copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone
9. Install âžž choose firmware âžž tick on reboot after installation âžž wait for the end of the process
4.2. Updating the assembly on the basis of official
1. Downloading firmware (spoiler Firmware )
2. Check the MD5 firmware after downloading. Perfect for this purpose. Hashtab (tab in the file properties)
3. Making the necessary wipe (instructions 5.2 )
4. Reboot âžž Recovery
5. Copy the firmware to the root of USB Flash and connect via OTG-cable. Either we connect the smartphone to the PC / laptop, copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone
6. Install âžž choose firmware âžž tick on reboot after installation âžž wait for the end of the process
2. Check the MD5 firmware after downloading. Perfect for this purpose. Hashtab (tab in the file properties)
We translate the smartphone in TWRP
⚹ Turn off
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
3. Making the necessary wipe (instructions 5.2 )
4. Reboot âžž Recovery
If at this stage the smartphone hangs on the Mi logo
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
⚹ After the vibration, release the power button and wait for the launch of TWRP
5. Copy the firmware to the root of USB Flash and connect via OTG-cable. Either we connect the smartphone to the PC / laptop, copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone
6. Install âžž choose firmware âžž tick on reboot after installation âžž wait for the end of the process
5. Updating the firmware
5.1. Official (Global / Russia / China)
When updating via the system updater ("3 points")
Can update
Global (MI) âžž Global (MI)
Russia (RU) âžž Russia (RU)
China (CN) China (CN)
Withraising firmware version data will be saved
All other transitions
⚹ In the presence of an unlocked bootloader, via fastboot (more details in the instructions 6.1.1 and 6.2.1 )
⚹ If there is an unlocked bootloader, through TWRP (more details in the instructions 6.1.2 and 6.2.2 )
Can update
Global (MI) âžž Global (MI)
Russia (RU) âžž Russia (RU)
China (CN) China (CN)
Withraising firmware version data will be saved
All other transitions
⚹ In the presence of an unlocked bootloader, via fastboot (more details in the instructions 6.1.1 and 6.2.1 )
⚹ If there is an unlocked bootloader, through TWRP (more details in the instructions 6.1.2 and 6.2.2 )
5.2. Assembly on the basis of official
� Withraisingfirmware versions andassembly from the same team or author: Wipe Cache
� Withloweringfirmware versions andassembly from the same team or author: Wipe Cache and Format Data
� Withraising / lowering / savingfirmware versions andtransition to assembly from another team or author: Wipe Cache and Format Data
� Withloweringfirmware versions andassembly from the same team or author: Wipe Cache and Format Data
� Withraising / lowering / savingfirmware versions andtransition to assembly from another team or author: Wipe Cache and Format Data
6. Go to the firmware on the firmware
6.1. Russia / China âžž Global
6.1.1. fastboot
� Instruction 2
6.1.2. TWRP
It is highly recommended to install the firmware copied to MicroSD / USB Flash in order not to get a smaller amount of free internal memory!
1. Downloading firmware (spoiler Firmware ) and Dm-Verity & ForceEncrypt Disabler
2. Check the MD5 firmware after downloading. Perfect for this purpose. Hashtab (tab in the file properties)
3. Install TWRP according to the instructions 3.1.1 (Except points 8 and 9)
4. Wipe ➞ Advanced wipe âžž section Cache (the remaining sections will be overwritten by the firmware installation script)
5. Configure TWRP (language selection, time zone setting, etc.)
6. We copy the firmware and Dm-Verity & ForceEncrypt Disabler to the root of the USB Flash and connect via the OTG cable. Either we connect the smartphone to the PC / laptop, copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone
7. Install âžž select firmware âžž add Dm-Verity & ForceEncrypt Disabler to the queue âžž tick on reboot after installation âžž wait for the process to finish
1. Downloading firmware (spoiler Firmware ) and Dm-Verity & ForceEncrypt Disabler
2. Check the MD5 firmware after downloading. Perfect for this purpose. Hashtab (tab in the file properties)
3. Install TWRP according to the instructions 3.1.1 (Except points 8 and 9)
4. Wipe ➞ Advanced wipe âžž section Cache (the remaining sections will be overwritten by the firmware installation script)
5. Configure TWRP (language selection, time zone setting, etc.)
6. We copy the firmware and Dm-Verity & ForceEncrypt Disabler to the root of the USB Flash and connect via the OTG cable. Either we connect the smartphone to the PC / laptop, copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone
7. Install âžž select firmware âžž add Dm-Verity & ForceEncrypt Disabler to the queue âžž tick on reboot after installation âžž wait for the process to finish
6.2. Building on the basis of official âžž Global / Russia / China
6.2.1. fastboot
� Instruction 2
6.2.2. TWRP
It is highly recommended to install the firmware copied to MicroSD / USB Flash in order not to get a smaller amount of free internal memory!
1. Downloading firmware (spoiler Firmware ) and Dm-Verity & ForceEncrypt Disabler
2. Check the MD5 firmware after downloading. Perfect for this purpose. Hashtab (tab in the file properties)
3. Wipe ➞ Format Data (Confirm input format yes )
4. Wipe ➞ Advanced wipe âžž section Cache (the remaining sections will be overwritten by the firmware installation script)
5. Reboot âžž Recovery
6. Configure TWRP (language selection, time zone setting, etc.)
7. We copy the firmware and Dm-Verity & ForceEncrypt Disabler to the root of the USB Flash and connect via the OTG cable. Either we connect the smartphone to the PC / laptop, copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone
8. Install âžž select firmware âžž add Dm-Verity & ForceEncrypt Disabler to the queue âžž tick on reboot after installation âžž wait for the process to finish
1. Downloading firmware (spoiler Firmware ) and Dm-Verity & ForceEncrypt Disabler
2. Check the MD5 firmware after downloading. Perfect for this purpose. Hashtab (tab in the file properties)
We translate the smartphone in TWRP
⚹ Turn off
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
3. Wipe ➞ Format Data (Confirm input format yes )
4. Wipe ➞ Advanced wipe âžž section Cache (the remaining sections will be overwritten by the firmware installation script)
5. Reboot âžž Recovery
If at this stage the smartphone hangs on the Mi logo
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
⚹ After the vibration, release the power button and wait for the launch of TWRP
6. Configure TWRP (language selection, time zone setting, etc.)
7. We copy the firmware and Dm-Verity & ForceEncrypt Disabler to the root of the USB Flash and connect via the OTG cable. Either we connect the smartphone to the PC / laptop, copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) and disconnect the smartphone
8. Install âžž select firmware âžž add Dm-Verity & ForceEncrypt Disabler to the queue âžž tick on reboot after installation âžž wait for the process to finish
6.3. Global / Russia / China âžž assembly on the basis of official
� Instruction 4.1
7. Installation / Magisk deleting and updating firmware installed with Magisk
7.1. installation
7.1.1. Official (Global / Russia / China)
1. Install TWRP according to the instructions 3.1.1 (Except points 8 and 9)
2. Swinging Magisk
3. Connect your phone to your PC / laptop, copy Magisk in MicroSD / internal memory root (for ease in TWRP) and disconnect the smartphone. Or copy to USB Flash Magisk root and connect on the OTG-cable
4. Install âžž choose Magisk âžž tick on reboot after installation âžž wait for the end of the process
2. Swinging Magisk
3. Connect your phone to your PC / laptop, copy Magisk in MicroSD / internal memory root (for ease in TWRP) and disconnect the smartphone. Or copy to USB Flash Magisk root and connect on the OTG-cable
4. Install âžž choose Magisk âžž tick on reboot after installation âžž wait for the end of the process
If the Magisk icon does not appear on the desktop
⚹ Additionally install Magisk Manager
7.1.2. Assembly on the basis of official
1. Swinging Magisk
2. Install âžž choose Magisk âžž tick on reboot after installation âžž wait for the end of the process
2. Install âžž choose Magisk âžž tick on reboot after installation âžž wait for the end of the process
If the Magisk icon does not appear on the desktop
⚹ Additionally install Magisk Manager
7.2. removal
1. We connect the smartphone to a PC / laptop and copy it to the root of the MicroSD / internal memory (for the convenience of searching in TWRP) Magisk-uninstaller . Or download directly via smartphone
2. Install âžž choose Magisk-uninstaller âžž put a tick on the reboot after installation âžž waiting for the end of the process
We translate the smartphone in TWRP
⚹ Turn off
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
2. Install âžž choose Magisk-uninstaller âžž put a tick on the reboot after installation âžž waiting for the end of the process
7.3. Firmware upgrade with established Magisk
1. Downloading firmware (spoiler Firmware )
2. Check the MD5 firmware after downloading. Perfect for this purpose. Hashtab (tab in the file properties)
3. Swinging Magisk
4. Making the necessary wipe (instructions 5.2 )
5. Reboot âžž Recovery
6. Connect your phone to your PC / laptop, copy the firmware and Magisk in MicroSD / internal memory root (for ease in TWRP) and disconnect the smartphone. Or copy the firmware and Magisk in USB Flash root and connect on the OTG-cable
7. âžž select the Install firmware âžž wait for process termination
8. Reboot âžž Recovery
9. âžž select the Install file Magisk âžž put a check on reboot after installation âžž wait for process termination
2. Check the MD5 firmware after downloading. Perfect for this purpose. Hashtab (tab in the file properties)
3. Swinging Magisk
We translate the smartphone in TWRP
⚹ Turn off
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
4. Making the necessary wipe (instructions 5.2 )
5. Reboot âžž Recovery
If at this stage the smartphone hangs on the Mi logo
⚹ Clamping the power and volume buttons plus
⚹ After the vibration, release the power button and wait for the launch of TWRP
⚹ After the vibration, release the power button and wait for the launch of TWRP
6. Connect your phone to your PC / laptop, copy the firmware and Magisk in MicroSD / internal memory root (for ease in TWRP) and disconnect the smartphone. Or copy the firmware and Magisk in USB Flash root and connect on the OTG-cable
7. âžž select the Install firmware âžž wait for process termination
8. Reboot âžž Recovery
9. âžž select the Install file Magisk âžž put a check on reboot after installation âžž wait for process termination
Post has been editedCamerado - 30.12.20, 10:54
Reason for editing: updating links
Roubchi @ 11/11/2018, 00:08
And how to calculate the version of arb out of the box ??
At first glance, it is difficult, but nevertheless - you can:
Xiaomi Mi Max 3 - Miui Firmware (Post Destroyer71 # 77618004)
roubchi , type the command * # 06 # and if there is meid, then this is Chinese tel. Or even easier by the box, in the Chinese version everything is in Chinese and the Euro Charger Post has been editedStifler93Sp - 11.11.18, 00:21
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement