Keenetic Ultra (KN-1810) - Discussion | [wifirouter]



Rep: (1230)
Keenetic Ultra (KN-1810)- Discussion
Attached Image

Information
Description
  • Product Name: Ultra
  • Part Number: KN-1810-01RU
  • NDM HW ID: KN-1810
  • AC2600 Wave 2 MU-MIMO 2.4 + 5 GHz with four amplifiers and 5 dBi antennas
  • Any Internet tariffs up to 1 Gbps, MultiWAN, IPTV and Smart TV
  • SFP port for connecting via fiber optic cable
  • USB 2.0 and 3.0 for 3G / 4G / LTE / DSL modems, disks, printer or DECT station
  • File server, DLNA, Time Machine, standalone torrent client Transmission
  • Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  • Configure and manage your home network via mobileattachment
A photo
Specifications
Main characteristics

The model index is KN-1810
Processor - MediaTek MT7621AT (MIPS1004Kc) @ 880 MHz, 2 cores
RAM - Nanya NT5CC128M16IP-DI 256MB (DDR3-1600)
Flash-memory - Spansion S34ML01G200TF100 128MB (Dual Boot, NAND)
Wi-Fi 2.4 + 5 GHz - Yes
Class Wi-Fi - 2x MediaTek MT7615N - 2x 4T4R 2.4 / 5GHz (800 + 1733Mbps)
Antennas - 4x 5dBi (FEM Skyworks SKY85303-11 (ePA / eLNA) 2,4GHz, FEM Skyworks SKY85717-21 (ePA / eLNA) 5GHz, fixed DB PIFA ext), AC2600 (ARM + Andes)
Ports - SFP: 1x GE (RTL8211FS combo GPHY), RJ45: 5x GE (10/100/1000)

Wi-Fi / WPS button ✔
FN button - Yes, two buttons
USB ports ✔
3G / 4G connectivity - Via compatible USB modem
Connect via DSL ADSL2 + / VDSL2 viaKeenetic Plus DSL
Telephony support -C Keenetic Plus DECT
Support module for Wi-Fi ✔

Performance

2.4 GHz Wi-Fi network speed - 800 Mbps
Wi-Fi 5 GHz network speed - 1733 Mbps
Gigabit home network ✔
For tariffs above 100 Mbit / s ✔
IPoE / PPPoE Routing - Up to 1800 Mbps Duplex
L2TP / PPTP Routing - Up to 800 Mbps
Reading from a USB disk - 90 MB / s (USB 3.0)

Functions and protocols

IPoE ✔
PPPoE ✔
PPTP ✔
L2TP ✔
802.1x
CABiNET ✔
Multiple PPP Tunnels ✔
PAP / CHAP / MS-CHAP / MS-CHAP v2 ✔
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q ✔
Route Table (DHCP / Manual) ✔
Link Duo ✔
IntelliQoS ✔
DHCP (client / server) ✔
IPv6 Dual Stack ✔
NAT ✔
Igmp ✔
UPnP
Manual port forwarding ✔
PPTP / L2TP Transit ✔
SPI DoS Attack Firewall ✔
Ping checker ✔

Wi-Fi wireless network

Seamless roaming 802.11 k / r / v ✔
MU-MIMO ✔
Airtime Fairness ✔
Beamforming ✔
Pre-configured protection Wi-Fi ✔
WEP, WPA-PSK ✔
WPA2-PSK, WPA2-Enterprise ✔
WPA3-PSK, WPA3-Enterprise, OWE ✔
Multi-SSID and guest network ✔
MAC access control ✔
Wi-Fi Multimedia (WMM)

Applications

Mobile application for Android and iOS ✔
Transmission torrent client ✔
File server ✔
DLNA server ✔
UDP to HTTP proxy ✔
FTP server ✔
Print server ✔
IPSec VPN Client / Server ✔
PPTP VPN server - 10 tunnels
Internet filter Yandex.DNS ✔
Parental control SkyDNS ✔
Dynamic DNS client ✔

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H - 214mm x 154mm x 33mm
Mass of the device - 488g.
Operating temperature range - 0–40 ° С
Humidity of the ambient air during operation - 20–95%
Power supply - 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian ✔
Command Line (CLI) by TELNET
The ability to control from the external network ✔
Backup and restore configuration ✔
Software update features ✔
Logging system events ✔

Equipment

Device
Power adapter ✔
Ethernet cable ✔
Instructions for use ✔
List of supported SFP modules
Documentation
Reviews, links
Useful information
Problem solving, setup
NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
Wi-Fi signal attenuation coefficients when passing through various environments
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
The impact of USB 3.0 devices on the quality of data transmission over the air
ÎœTorrent client setup
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
When adding a torrent, you can choose which files to download?
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Configure automatic reboot using CLI TELNET by _Danila_Master_
Comments on the work of the Padavana TX Burst
Four Stream - Does the KN-1010 HT processor software support? Information from balian007
Installing and configuring Transmission 2.93 from Opkg Entware-3x for Keenetic Giga KN-1010 from enpa
Solving the problem of hard disk sleep using the OPKG package hdparm from balian007
Installing and configuring ntfs-3g-utils from Opkg Entware for Keenetic from enpa
Information about capacitors in KN-1010 \ KN-1810 from Ilya Khrupalov
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru
Selective bypass blocking on routers with Padavan and KeeneticOS firmware
We share USB drive via NFS protocol and IPTV broadcast to DLNA using playlists from face_ltd
How to mount a partition from NAS storage in a torrent client using OPKG Entware? by balian007
Choosing a Wi-Fi system channel in a multi-apartment building, dense and uneven apartment utilization of channels by neighbors from Support Keenetic, ASilver1974
Connecting PON-terminal SERCOMM Routing mode in a KN-1810 from fixafixa
Sane - using a USB MFP or scanner
Setup and installation Keenetic-grafana-monitoring package OPKG Entware from vitaliy_364
Configuring ZMedia Proxy (ZMP) on the Keenetic router with ENTWARE (suitable for routers with Padavan and Entware) from Yurisavagemessiahzine.com
NEXTDNS - DNS service with support for flexible profiles from ENPA
TTL lock
Keenetic Recovery
Internet speed testing
http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.
Instructions

Internet connection setup:

Install and configure KeeneticOS:

Reset:

Diagnostics:

Recovery firmware:

Reservation

Speed ​​Limit:

Remote access:

VLAN:

Forwarding and port configuration:

Wi-Fi setup:

WPS (Wi-Fi Protected Setup):

Security and DNS:

schedule :

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, Wireguard, VPN-server:

File server and USB-drives:

FTP server:

BitTorrent Transmission Client:

DLNA:

Digital television:

USB printer:

CLI (command line), SSH:

Modes:

3G / 4G modems:

Digital telephony:

OPKG packages:

IntelliQoS:
Application to manage the router
Firmware


The official version of KeeneticOS
KeeneticOS out of the box

2.11

2.12

2.13

2.14

2.15

3.00

3.01

3.03

3.04

3.05
Debug version of KeeneticOS
Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

  • Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  • Changelog of debug versions of KeeneticOS -here.
Program for firmware recovery
KeeneticOS firmware catalog

The curator of the topic is enpa


Post has been editedenpa - 16.12.20, 11:29
Reason for editing: Stable version of Keeneticos 3.05.c.6.0-0 on 11.12.2020 for KN-1810



Rep: (4)
Roman_NSK @ 09.05.19, 19:50*
I tried differently, but I have the best combination in the aforementioned case.

In the specified case, the router automatically selects the width of the channel - 1,2,4 or 8 "standard" channels in 20 MHz.



Rep: (33)
SAM49 @ 05/09/19, 20:37*
In the specified case, the router automatically selects the width of the channel - 1,2,4 or 8 "standard" channels in 20 MHz.

And why then from options 20, 20/40, 20/40/80 or online 160 - works better at 160?
Devices "can" from 20 and to 40.
Those., The device (20 MHz) works better at 160 than 20. The device (40 MHz) works better at 160 than 40 and so on ...
I, of course, is still noob, but what I have, I say)



Rep: (4)
Roman_NSK @ 09.05.19, 21:16*
And why then from options 20, 20/40, 20/40/80 or online 160 - works better at 160?

The selection of the channel is carried out in a wider strip.



Rep: (33)
SAM49 @ 9.05.19, 22:17*
Channel selection

On the channels - I also tried. I say, the most diverse options for tested, until I achieved the best work of the whole heap of devices



Rep: (4)
Roman_NSK @ 09.05.19, 22:23*
On the channels - I also tried.

In the first range, the channel selection essentially does not play if 20/40/80/160 MHz is installed, since 160 MHz overlaps the entire range of 80 + 80.

Attached images
Attached Image
Attached Image


Post has been editedSam49 - 10.05.19, 13:16



Rep: (4)
The speed read / write USB corresponds to the declared 100 and 50, respectively. Well done!

Attached images
Attached Image
Attached Image



Rep: (125)
ENPA @ 08.05.19, 20:17*
AMAJ7, show log from server?! Perhaps GRE does not pass.


This is a problem with encryption in the current firmware, in the next everything promised to fix. Here is the topic with the discussion of this bugHTTPS: //Forum.keenetic...Obinding- Wrongs/



Rep: (5)
AMAJ7 @ 08.05.19, 12:41*
I can not configure the VPN connection to the PPTP router from dozens. Authorization passes, and then immediately error 734: PPP-connection protocol was interrupted. Android client is connected to default settings. Dozens are written quite a lot about this sore, and it seems like people solved the problem by resolving the unsafe password, changes in the connection encryption parameters, some even helped remove the checkbox to remember the data for the input. I tried it all, but the mistake remains. There are thoughts where to dig?


I was helped by the inclusion of a 128-bit key:
https: //help.keenetic....0-%D0%B8%D0%B7-Windows

P.S. Router Model Ultra (KN-1810) OS version 2.15.c.3.0-2
Windows 10 1607 LTSB

The web interface - noticed who some time ago the web interface really began to slow down, and this happened without any reasons (i.e. there was no update to a new firmware / There was no change in the settings of the router, the running time is 18 days . 19:06:02)

Post has been editedcbpi - 11.05.19, 23:05



Rep: (0)
Prompt please, KN Ultra, on the 5GHz 5 devices at one time lost wi-fi connection, and do not want to recover. Wi-fi works only within 50 cm from the router, and the application shows the 26% signal. Where there used to be 4 sticks - now one hardly.
Reboot and pulling out of the socket does not help.
The router is plugged into the modem HUAWEI E3372-h (though I think it is not there)



Rep: (14)
* blackman2016,
And if you pull out the modem? Try



Rep: (148)
Blackman2016 @ 11.05.19, 23:36*
At one moment a Wi-Fi connection disappears, and no longer wants to recover. Wi-Fi works only within a 50 cm radius from the router, and then the application shows 26% of the signal

Who does the connection disappear with? All customers stop connecting? What application shows 26%? It would be better to set out all this in support, and here (or in a personal) leave the room.



Rep: (1230)
* blackman2016, So the problem is what? Disappears access to the gateway or disappears from 5 GHz access point? It is necessary to accurately determine the problem and require self-test https: //help.keenetic .../articles/360000440120 file for analysis. File must be removed after playing a problem.



Rep: (0)
1. Express the modem did not solve the problem.
2. Keenetic technical support by phone said that the problem is 100% in the gland, and they said to carry a router in SC. Since it did not pass 14 days from the purchase, the router I was exchanged today for a new one in the store.
3. The problem was manifested in the following: All customers are 2.4 and 5 GHz at one point fell off. It was possible to connect to the router only from a distance of 30-50 cm. At the same time, the router itself worked properly. Networks 2.4 and 5 GHz were available, Internet was available. But when removing a longer distance - WiFi disappeared without a trace.
The client factor is completely excluded, checked on XS Max, MBP Pro 15 Late 2018, ATV4K, S10. All these devices refused to see the network, where he used to be confident and connected only if they are actually closer to the router.
Let me remind you that reset to factory settings, update to beta, change the socket - did not help.
The voltage drops at the time of the first disconnection of all devices was not, the socket with the earth. There was no lightning and other anomalies.

I will sincerely hope that the rented kinetics will work for a long time and without problems.



Rep: (268)
Blackman2016 @ 14.05.2019, 05:40*


In addition to the BKTA firmware, you need to configure WiFi's manual channels with a wide range, if there are many neighbors with a scanner and see what freedom, at 2.4 mostly 6 or 8 channel works well, and on me 5 132, and the computer started working at maximum speed 600MB on others up to 400MB.



Rep: (14)
Eh, do not bother me with sneakers). I already know a million times said, but now I needed. Soon the new firmware will be released and I am going to cross it from 2.14, which, and most importantly, how do I save before the update, to return to 2.14?



Rep: (40)
Yesterday, the Wi-Fi was stopped working on a router 1810, writes on the smartphone "overflowing an access point", where it came from - it's not clear. On the Internet, the Internet works as always.
You can not go to the router from the mobile application, the tablet does not have an appropriate entry.
Reset to the plant will be very hard, a lot of additional hangs on the router.

Post has been editediozo - 15.05.19, 07:23



Rep: (68)
Viselga @ 05/15/19, 06:38*
You can not go to the router from the mobile application, the tablet does not have an appropriate entry.

do not understand? and what prevents the browser from the tablet to go to my.kenetic.net
To overload the router?



Rep: (40)
* bulion ,
All, thanks, just found what it was. Looks like I contacted with a white list, now turned it off, rebooted and WiFi appeared.
And, yes, I was able to come in, especially since I myself created Keenetic UI and calmly went, and something spare something. In addition, in the morning, with a disorder from WiFi, I went to mow the grass and, after some time, the electric mower broke down. Here I completely said ...



Rep: (1230)
K
Flood in the topic is cleaned. The choice and comparison of the Vender is carried out in this topic -Selection of network equipment



Rep: (1230)
Stable version of KeeneticOS2.15.C.4.0-1 from 05/16/2019for KN-1810

Component set with cifs nqe
acl
adguard-dns
afp
base
chilli
cifs
cloud
cloudcontrol
components
config-ap
config-client
config-repeater
corewireless
ddns
dhcpd
dlna
dot1x
dpi
easyconfig
eoip
fat
ftp
gre
hfsplus
igmp
interface-extras
ip6
ipip
ipsec
kabinet
l2tp
madwimax
mdns
miniupnpd
monitor
mws
nathelper-ftp
nathelper-h323
nathelper-pptp
nathelper-rtsp
nathelper-sip
netflow
ntced
ntfs
nvox
openvpn
opkg
opkg-kmod-audio
opkg-kmod-dvb-tuner
opkg-kmod-fs
opkg-kmod-netfilter
opkg-kmod-netfilter-addons
opkg-kmod-tc
opkg-kmod-usbip
opkg-kmod-video
pingcheck
ppe
ppp
pppoe
pptp
safedns
skydns
snmp
ssh
sstp
sstp-server
storage
trafficcontrol
transmission
tunnel
udpxy
usb
usbdsl
usblte
usbmodem
usbnet
usbserial
vpnserver
vpnserver-l2tp
ydns

Kit of components with beta cifs tsmb
acl
adguard-dns
afp
base
chilli
cloud
cloudcontrol
components
config-ap
config-client
config-repeater
corewireless
ddns
dhcpd
dlna
dot1x
dpi
easyconfig
eoip
fat
ftp
gre
hfsplus
igmp
interface-extras
ip6
ipip
ipsec
kabinet
l2tp
madwimax
mdns
miniupnpd
monitor
mws
nathelper-ftp
nathelper-h323
nathelper-pptp
nathelper-rtsp
nathelper-sip
netflow
ntced
ntfs
nvox
openvpn
opkg
opkg-kmod-audio
opkg-kmod-dvb-tuner
opkg-kmod-fs
opkg-kmod-netfilter
opkg-kmod-netfilter-addons
opkg-kmod-tc
opkg-kmod-usbip
opkg-kmod-video
pingcheck
ppe
ppp
pppoe
pptp
safedns
skydns
snmp
ssh
sstp
sstp-server
storage
trafficcontrol
transmission
tsmb
tunnel
udpxy
usb
usbdsl
usblte
usbmodem
usbnet
usbserial
vpnserver
vpnserver-l2tp
ydns

Changes
2.15.C.4.0-1

Supported Models:

Keenetic Giga (KN-1010)
Keenetic Start (KN-1110)
Keenetic 4G (KN-1210)
Keenetic Lite (KN-1310)
Keenetic Omni (KN-1410)
Keenetic City (KN-1510)
Keenetic Air (KN-1610)
Keenetic Extra (KN-1710)
Keenetic Ultra (KN-1810)
Keenetic Viva (KN-1910)
Keenetic DSL (KN-2010)
Keenetic Duo (KN-2110)
Zyxel Keenetic Start II
Zyxel Keenetic Lite III rev.B
Zyxel Keenetic 4G III rev.B
Zyxel Keenetic Giga III
Zyxel Keenetic Ultra II
Zyxel Keenetic Air
Zyxel Keenetic Extra II

Corrections:

Fixed memory allocation problems with DLNA and Transmission;
Fixed traffic counting on hosts in the case of a TV port for Giga III, Ultra II;
Fixed traffic count by hosts in VDSL mode for DSL and Duo;
Wi-Fi: fixed re-association after FT-transfer;
TNTFS: fixed display of icons in file names;
DHCP Relay: added the ability to set any IP interface as a WAN;
Keenetic Plus DECT: Added support for the Panasonic KX-TGA250 handset.

(c)https://help.keenetic.com/

Installation process and debug mode
1. Download firmware version 2.15.C.4.0-1
2. Installby file upload.
3. Check the work.

If after installing 2.15.C.4.0-1 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disabledebug mode.
6. We send debug self-test fileofficial technical support.

NDM HW ID Decryption
Giga KN-1810-01RU KN-1810

Tuxera TSMB
Tuxera SMBis a high-performance replacement for Samba and other open source SMB / CIFS servers. Provides support for the Microsoft Server Message Block (SMB) protocol.

Advantages of Tuxera SMB:

Support for Durable Filehandles (launch applications from a network drive, etc.);
Master Browser function support;
Support for Windows Backup;
Apple Time Machine support.

Version with cifs nqe:
Attached fileKn-1810_stable_cifs_2.15.c.4.0-1.zip.(20.89 MB)

Version with beta cifs tsmb:
Attached fileKN-1810_STABLE_TSMB_2.15.C.4.0-1.zip.(21.28 MB)

Mirror:
cloud.mail - v2.04-v2.15 Firmware Keenetic
yandex.disk - v2.04-v2.15 Firmware Keenetic
Picture


Post has been editedenpa - 16.05.19, 21:05


Full version    

Help     rules

Now: 14.01.21, 02:28