Keenetic Giga (KN-1010) - Discussion | [wifirouter]



Rep: (1222)
Keenetic Giga (KN-1010)- Discussion
Attached Image

Information
Description
  • Product Name: Giga
  • Part Number: KN-1010-01RU
  • NDM HW ID: KN-1010
  • Wi-Fi AC1300 Wave 2 MU-MIMO 2.4 + 5 GHz with four amplifiers and 5 dBi antennas
  • Any Internet tariffs up to 1 Gbps, MultiWAN, IPTV and Smart TV
  • SFP port for connecting via fiber optic cable
  • USB 2.0 and 3.0 for 3G / 4G / LTE / DSL modems, disks, printer or DECT station
  • File server, DLNA, Time Machine, standalone torrent client Transmission
  • Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  • Configure and manage your home network via mobileattachment

A photo
Specifications
Main characteristics

The index of the model is KN-1010
Processor - MediaTek MT7621AT (MIPS1004Kc) @ 880 MHz, 2 cores
RAM - Nanya NT5CC128M16IP-DI 256MB (DDR3-1600)
Flash-memory - Spansion S34ML01G200TF100 128MB (Dual Boot, NAND)
Wi-Fi 2.4 + 5 GHz - Yes
Class Wi-Fi - MediaTek MT7615DN - 2x 2T2R 2.4 / 5GHz (400 + 867Mbps)
Antennas - 4x 5dBi (FEM Skyworks SKY85303-11 (ePA / eLNA) 2,4GHz, FEM Skyworks SKY85717-21 (ePA / eLNA) 5GHz, fixed PIFA ext), AC1200 (ARM + Andes)
Ports - SFP: 1x GE (RTL8211FS combo GPHY), RJ45: 5x GE (10/100/1000)

Wi-Fi / WPS button ✔
FN button - Yes, two buttons
USB ports ✔
3G / 4G connectivity - Via compatible USB modem
Connect via DSL ADSL2 + / VDSL2 viaKeenetic Plus DSL
Telephony support -C Keenetic Plus DECT
Support module for Wi-Fi ✔

Performance

2.4 GHz Wi-Fi network speed - 400 Mbps
5 GHz Wi-Fi network speed - 867 Mbps
Gigabit home network ✔
For tariffs above 100 Mbit / s ✔
IPoE / PPPoE Routing - Up to 1800 Mbps Duplex
L2TP / PPTP Routing - Up to 800 Mbps
Reading from a USB disk - 90 MB / s (USB 3.0)

Functions and protocols

IPoE ✔
PPPoE ✔
PPTP ✔
L2TP ✔
802.1x
CABiNET ✔
Multiple PPP Tunnels ✔
PAP / CHAP / MS-CHAP / MS-CHAP v2 ✔
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q ✔
Route Table (DHCP / Manual) ✔
Link Duo ✔
IntelliQoS ✔
DHCP (client / server) ✔
IPv6 Dual Stack ✔
NAT ✔
Igmp ✔
UPnP
Manual port forwarding ✔
PPTP / L2TP Transit ✔
SPI DoS Attack Firewall ✔
Ping checker ✔

Wi-Fi wireless network

Seamless roaming 802.11 k / r / v ✔
MU-MIMO ✔
Airtime Fairness ✔
Beamforming ✔
Pre-configured protection Wi-Fi ✔
WEP, WPA-PSK ✔
WPA2-PSK, WPA2-Enterprise ✔
WPA3-PSK, WPA3-Enterprise, OWE ✔
Multi-SSID and guest network ✔
MAC access control ✔
Wi-Fi Multimedia (WMM)

Applications

Mobile application for Android and iOS ✔
Transmission torrent client ✔
File server ✔
DLNA server ✔
UDP to HTTP proxy ✔
FTP server ✔
Print server ✔
IPSec VPN Client / Server ✔
PPTP VPN server - 10 tunnels
Internet filter Yandex.DNS ✔
Parental control SkyDNS ✔
Dynamic DNS client ✔

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H - 214mm x 154mm x 33mm
Mass of the device - 488g.
Operating temperature range - 0–40 ° С
Humidity of the ambient air during operation - 20–95%
Power supply - 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian ✔
Command Line (CLI) by TELNET
The ability to control from the external network ✔
Backup and restore configuration ✔
Software update features ✔
Logging system events ✔

Equipment

Device
Power adapter ✔
Ethernet cable ✔
Instructions for use ✔
List of supported SFP modules
Documentation
Reviews, links
Keenetic Resources
Reviews, tests, reviews
Useful information
Problem solving, setup
NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Antenna Comfast CF-ANT2410DA for a place native to Keenetic II, Giga II
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
Zyxel Keenetic Giga III + Zyxel Keenetic Plus DECT - Internet and telephony in the office from WOOF11
The impact of USB 3.0 devices on the quality of data transmission over the air
ÎœTorrent client setup
Zyxel GIGA III router: setting up simultaneous work with several Internet channels from Sergei Golubitskiy (youtube video instruction)
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Installing Keenetic Giga III in a private house from olezel
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
When adding a torrent, you can choose which files to download?
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Using the WAN port as a LAN port in Keenetic Giga III \ Ultra II using the enpa CLI TELNET command line
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Configure automatic reboot using CLI TELNET by _Danila_Master_
Comments on the work of the Padavana TX Burst
Four Stream - Does the KN-1010 HT processor software support? Information from balian007
Installing and configuring Transmission 2.93 from Opkg Entware-3x for Keenetic Giga KN-1010 from enpa
Solving the problem of hard disk sleep using the OPKG package hdparm from balian007
Jellyfish Video Bitrate Test Files -.mkv files for testing streaming video and playing multimedia.
Installing and configuring ntfs-3g-utils from Opkg Entware for Keenetic from enpa
MT7615 Wireless Driver Information 4.4.1.2 from Padavan
Information about capacitors in KN-1010 \ KN-1810 from Ilya Khrupalov
Bridge mode for the optical terminal Rostelecom from healer2001
An example of creating a directory using the command 'mkdir' in the console from enpa
Using Emoji in the name of the Access Point of the Keenetic router from enpa
Registering the MAC address of the host in the Home segment using the console from enpa
Adding the MAC address of the Wi-Fi client device to the white or black list. When will the setting return to WebUI?
Setting up selective routing via imageMaster TOR
Anonymous access requests username / password via SMB \ CIFS protocol
Configuring access to the web interface via the Guest network from enpa
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru
4K and KN-1010 bedrocker tuning and testing recommendation
How to make friends with a device with GPON Rostelecom via SFP connector
Installing and configuring the smstools3 package on the Keenetic Giga (KN-1010) router for sending SMS
Example of setting up connection priority for a torrent client from enpa
Setting push notifications and alerts from Keenetic router from enpa
How to set up simultaneous access to files and printers in the user WindowsOS of 0998987
On the TX-Burst function of enpa
TTL lock
Keenetic Recovery
Internet speed testing
http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.
Instructions

Internet connection setup:

Install and configure KeeneticOS:

Reset:

Diagnostics:

Recovery firmware:

Reservation

Speed ​​Limit:

Remote access:

VLAN:

Forwarding and port configuration:

Wi-Fi setup:

WPS (Wi-Fi Protected Setup):

Security and DNS:

schedule :

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, Wireguard, VPN-server:

File server and USB-drives:

FTP server:

BitTorrent Transmission Client:

DLNA:

Digital television:

USB printer:

CLI (command line), SSH:

Modes:

3G / 4G modems:

Digital telephony:

OPKG packages:

IntelliQoS:
Application to manage the router
Firmware


The official version of KeeneticOS
KeeneticOS out of the box

2.10

2.11

2.12

2.13

2.14

2.15

3.00

3.01

3.03

3.04
Debug version of KeeneticOS
Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

  • Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  • Changelog of debug versions of KeeneticOS -here.
Program for firmware recovery
KeeneticOS firmware catalog

The curator of the topic is enpa


Post has been editedenpa - 14.10.20, 20:21
Reason for editing: Cap



Rep: (29)
* findrnet,
From the date of purchase (July 2018) re-test a bunch of firmware, has chosen the best 2 options:

on the old interface 2.11.C.1.0-3 (without accelerator)
the new 2.13.C.0.0-3 (only software accelerator)

Sit periodically that one is on the other hand, has approximately the same, although I tend more to the 11th, right now, on it a long time.



Rep: (17)
* Igorspb71,
You need to configure the NAS for remote use via the Internet.

Post has been editedcop76 - 03.02.19, 18:52



Rep: (0)
And what exactly should be set?



Rep: (3)
Igorspb71 @ 03.02.2019, 13:50*
Good day.
Dear sirs please help.
There is a problem.
Purchased and installed router Keenetic Giga (KN-1010), has connected thereto Synology DS218 storage.
The apartment is on the Wifi access to the repository, go out the connection disappears.
I can not find where there is information for beginners how to adjust.
Help, can anyone knows how to set up the kettle and that (a router or storage).


As far as I remember in Synogy can upnp on open ports on your router, but that if there is the appearance the ip, if not, on synology can take the domain name, and have remote access)



Rep: (17)
* Igorspb71,
That way:Synology NAS Network Storage - Discussion
There really all sluggish.



Rep: (199)
Sail @ 02/03/19 12:30 pm*
Vladr @ 03.02.2019, 10:59
Sail,
On the other side you have someone must parse the incoming tagged traffic and distribute to end users, ie, controlled switch for example.
And on our router to configure it not?


To mark multiple vlan traffic and taxied to a port it can without problems, who at the output will parse it? But for this it is necessary and with the other hand to put a second router or managed switch, where to register at a port which comes vlan give.

Posted on 03/02/2019, 21:03:

fatspirit @ 03.02.19, 14:12*
Smoking in the direction of OpenVPN.

It has been built on smart PPTP, L2TP, IPSec ...



Rep: (325)
ebsysert1983 @ 03.02.19, 15:59*
If it is not difficult to put a bag over netdata entware and see cpu load and memory in real time.


EXAMPLE like vyglfdit - torrent to router 7621
torrent
Attached Image

Attached Image


syncthing
Attached Image

Its load unless it is IPSEC / L2TP tunnels, or something like "syncthing" (synchronization of folders or files)router --- client (Windows) a file folder 500-1000sht. and the volume of such 5-10GB.
Picture


Post has been editedenpa - 05.02.19, 13:45



Rep: (543)
Vladr @ 03.02.19, 20:59*
It has been built on smart PPTP, L2TP, IPSec ...

If only to know how to route protocol are forwarding to LAN.



Rep: (6)
* Igorspb71 Register on https://www.synology.com/ru-ru And applications for smartphones will be remote access, only instead of the ip, enter the username received at registration.



Rep: (199)
fatspirit @ 3.02.19, 22:14*
If only to know how to route protocol are forwarding to LAN

By connecting to the vpn server to the remote terminal receives the ip vpn on remote network interface. What else is necessary to route prokidyval?



Rep: (16)
Posted on 03/02/2019, 21:03:
Prompt then the settings on the router keenetic, as much as possible with VLAN iptv and internet taxied on one port? The router has one more.

Post has been editedSail - 04.02.19, 16:42



Rep: (1222)
* Sail, specify the VLAN IPTV in the ISP interface settings:

Attached Image



Rep: (229)
Kemsone @ 03.02.2019, 12:58*
wifi, then I took Giga, because the house will be responsible for the wifi ubiquiti with his brainchild Unifi AP and cloud key)

why yunifay ultra lives ?!

Post has been editedThoughts - 06.02.19, 02:16



Rep: (3)
* Thoughts ,
And why should not she live?)
This is a private house, the walls w / w, Optics, attic and in the same box, there controller for the young and (on the basis of a netbook with inteal atom 1.66 ghz, and already from the ultra UNIFEM goes utp cable and it neatly hanging on the ceiling of the second floor, and everything else gets full maturing, there screed about 25 cm and a signal from the ultra disappears on the stairs)

Or you about a new home?

Attached images
Attached Image


Post has been editedKemsone - 06.02.19, 08:04
Reason for editing: Amendments



Rep: (229)
* Kemsone,
if the house - that believe, and if the apartment - meaning do not see, unless there is extra money and Feng Shui



Rep: (3)
* Thoughts ,
Well, all right then. But in some of the apartments and requests that UNIFEM)



Rep: (7)
In the Internet \ Other connections added connection L2TP / IPSec. In the properties of the connection specified schedule (Monday through Friday from 7 am to 23.30 inclusive). Unscheduled connection continues to work, even though the status of writes that off as scheduled. Thus another schedule (every day at 3 am off for 1 min ISP connection for PPPoE) operates as needed.
Please tell me, what could be the reason for such behavior of the schedule?

Firmware 2.14.C.0.0-4, reset to factory made.



Rep: (1)
Such problems never and nowhere else ever seen.

I'm not running Connect android tv ->routerby cable.

I took the model of the router, as the previous (asus rt-n51) were the brakes at the same connection as if on dial-up and packet loss when the TV ping nouta with your home network.

According to the wi-fi there are no problems.

Bottom line, the same thing.

If the provider cable (100 Mbps) connected to the router, the connection does not work android tv ->router
On port 1, which is connected telly, 100 Mbit billed router settings (auto).

I tried to choose 10 Mbps - all right, works fine. And only in this mode.
Also, if you disconnect the cable provider, the TV in the home network pinged without packet loss.



Rep: (1634)
* Enforce1 ,
Cable tried to replace from the router to the android tv?
it turns out you have changed the router and the problem persists, then it is not a router.



Rep: (3)
* Enforce1 ,
Something I can not find yet the connection between which is connected ISP cable and tv.
If on, then check the cable to the TV tester, or change.


Full version    

Help     rules

Time is now: 11/12/20, 05:31