Keenetic Giga (KN-1010) - Discussion | [wifirouter]



Rep: (1222)
Keenetic Giga (KN-1010)- Discussion
Attached Image

Information
Description
  • Product Name: Giga
  • Part Number: KN-1010-01RU
  • NDM HW ID: KN-1010
  • Wi-Fi AC1300 Wave 2 MU-MIMO 2.4 + 5 GHz with four amplifiers and 5 dBi antennas
  • Any Internet tariffs up to 1 Gbps, MultiWAN, IPTV and Smart TV
  • SFP port for connecting via fiber optic cable
  • USB 2.0 and 3.0 for 3G / 4G / LTE / DSL modems, disks, printer or DECT station
  • File server, DLNA, Time Machine, standalone torrent client Transmission
  • Yandex.DNS and SkyDNS: protection against cyber threats and parental control
  • Configure and manage your home network via mobileattachment

A photo
Specifications
Main characteristics

The index of the model is KN-1010
Processor - MediaTek MT7621AT (MIPS1004Kc) @ 880 MHz, 2 cores
RAM - Nanya NT5CC128M16IP-DI 256MB (DDR3-1600)
Flash-memory - Spansion S34ML01G200TF100 128MB (Dual Boot, NAND)
Wi-Fi 2.4 + 5 GHz - Yes
Class Wi-Fi - MediaTek MT7615DN - 2x 2T2R 2.4 / 5GHz (400 + 867Mbps)
Antennas - 4x 5dBi (FEM Skyworks SKY85303-11 (ePA / eLNA) 2,4GHz, FEM Skyworks SKY85717-21 (ePA / eLNA) 5GHz, fixed PIFA ext), AC1200 (ARM + Andes)
Ports - SFP: 1x GE (RTL8211FS combo GPHY), RJ45: 5x GE (10/100/1000)

Wi-Fi / WPS button ✔
FN button - Yes, two buttons
USB ports ✔
3G / 4G connectivity - Via compatible USB modem
Connect via DSL ADSL2 + / VDSL2 viaKeenetic Plus DSL
Telephony support -C Keenetic Plus DECT
Support module for Wi-Fi ✔

Performance

2.4 GHz Wi-Fi network speed - 400 Mbps
5 GHz Wi-Fi network speed - 867 Mbps
Gigabit home network ✔
For tariffs above 100 Mbit / s ✔
IPoE / PPPoE Routing - Up to 1800 Mbps Duplex
L2TP / PPTP Routing - Up to 800 Mbps
Reading from a USB disk - 90 MB / s (USB 3.0)

Functions and protocols

IPoE ✔
PPPoE ✔
PPTP ✔
L2TP ✔
802.1x
CABiNET ✔
Multiple PPP Tunnels ✔
PAP / CHAP / MS-CHAP / MS-CHAP v2 ✔
MPPE (Auto / 40/56/128)
VLAN IEEE 802.1Q ✔
Route Table (DHCP / Manual) ✔
Link Duo ✔
IntelliQoS ✔
DHCP (client / server) ✔
IPv6 Dual Stack ✔
NAT ✔
Igmp ✔
UPnP
Manual port forwarding ✔
PPTP / L2TP Transit ✔
SPI DoS Attack Firewall ✔
Ping checker ✔

Wi-Fi wireless network

Seamless roaming 802.11 k / r / v ✔
MU-MIMO ✔
Airtime Fairness ✔
Beamforming ✔
Pre-configured protection Wi-Fi ✔
WEP, WPA-PSK ✔
WPA2-PSK, WPA2-Enterprise ✔
WPA3-PSK, WPA3-Enterprise, OWE ✔
Multi-SSID and guest network ✔
MAC access control ✔
Wi-Fi Multimedia (WMM)

Applications

Mobile application for Android and iOS ✔
Transmission torrent client ✔
File server ✔
DLNA server ✔
UDP to HTTP proxy ✔
FTP server ✔
Print server ✔
IPSec VPN Client / Server ✔
PPTP VPN server - 10 tunnels
Internet filter Yandex.DNS ✔
Parental control SkyDNS ✔
Dynamic DNS client ✔

Physical characteristics and environmental conditions

Device dimensions without antenna, W x D x H - 214mm x 154mm x 33mm
Mass of the device - 488g.
Operating temperature range - 0–40 ° С
Humidity of the ambient air during operation - 20–95%
Power supply - 100–240 V 50/60 Hz

Diagnostics and control

Web configurator in Russian ✔
Command Line (CLI) by TELNET
The ability to control from the external network ✔
Backup and restore configuration ✔
Software update features ✔
Logging system events ✔

Equipment

Device
Power adapter ✔
Ethernet cable ✔
Instructions for use ✔
List of supported SFP modules
Documentation
Reviews, links
Keenetic Resources
Reviews, tests, reviews
Useful information
Problem solving, setup
NDMS V2 + Entware
Keenopt setup
OpenVPN setup
[Entware] Raise OpenVPN server
[Entware] Openvpn client on the router
Enable 802.11n standard on NDMSv2 firmware (via CLI TELNET)
Forced assignment of N mode (compatibility N) for Wi-Fi via CLI from enpa
Wordpress on Entware
How to print from phone to printer via Android OS
Antenna Comfast CF-ANT2410DA for a place native to Keenetic II, Giga II
Flash modem in HiLink for maximum speed
CAT5 HiLink Speed ​​Test
All about IP Cloud (KeenDNS)
"White" IP from Rostelecom using Entware
Wake on Lan (WOL) function in ZyXEL Keenetic routers
A bit of theory on the mechanism of updating NDMSv2 firmware from _Danila_Master_
Yandex disk / WebDAV in ZyXEL Keenetic
How to change the network name of the smartphone in Android?
EaseUS Partition Master Free is a handy program for partitioning a hard disk into partitions (suitable for creating a partition in ext3, creating two ntfs & ext3 partitions).
What type of file system and paging file is best to use? Enpa description
What type of file system and paging file is best to use? Option from miltt
Correction of the Transmission operation without reinstalling the router firmware from enpa
How to determine the type of antenna connector (SMA / RP-SMA)?
NTP SERVERS - time servers
Using the zram paging file (LZO) for the swap location from enpa
Creating an ISP (Internet Service Provider) interface via CLI (command line) from enpa
Lock site by name on the firmware from dezhik
If you need port 5 to distribute the Internet to devices on the wire from enpa
Speed ​​limit via CLI (command line) from enpa
PuTTY is a client program for working with network protocols SSH, Telnet, SCP, SFTP, for connecting via a COM port and ZModem, a utility for generating RSA and DSA digital SSH keys.
Solving the problem with ping in games specifically WOT for Wi-Fi from freealbert
WPS on a router - what it is and how to use it
Setting up a connection to a working VPN server using a "gray IP" at the provider from YEDkii
Forced assignment of speed on the port of the router through the CLI from enpa
Resetting factory settings (factory-reset) via CLI from enpa
2 ways to change the MAC address of a computer network card
Zyxel Keenetic Giga III + Zyxel Keenetic Plus DECT - Internet and telephony in the office from WOOF11
The impact of USB 3.0 devices on the quality of data transmission over the air
ÎœTorrent client setup
Zyxel GIGA III router: setting up simultaneous work with several Internet channels from Sergei Golubitskiy (youtube video instruction)
Extending your home Wi-Fi network with Dalex-NEMAN ZyXEL PLA4201v2 EE powerline adapters
We fix the display of interfaces in the Connections section of enpa
Installing Keenetic Giga III in a private house from olezel
Setting up remote access Transmission from enpa
Setting up and installing minidlna (1.1.6 + git-8a996b-1) opag-package from enpa
Configuring and installing the syslog-ng opkg-package for recording logs to external media from enpa
Firmware update using enpa CLI TELNET command line
Turning off the LEDs of the router using the CLA TELNET command line from enpa
Disabling the FN button LED using the enpa CLI TELNET command line
When adding a torrent, you can choose which files to download?
Solving display problems \ login by domain name (hostname) of Keenetic router in Windows 10 from enpa
Using the WAN port as a LAN port in Keenetic Giga III \ Ultra II using the enpa CLI TELNET command line
Changing a Wi-Fi wireless channel in Keenetic using the enpa CLI TELNET command line
Configure automatic reboot using CLI TELNET by _Danila_Master_
Comments on the work of the Padavana TX Burst
Four Stream - Does the KN-1010 HT processor software support? Information from balian007
Installing and configuring Transmission 2.93 from Opkg Entware-3x for Keenetic Giga KN-1010 from enpa
Solving the problem of hard disk sleep using the OPKG package hdparm from balian007
Jellyfish Video Bitrate Test Files -.mkv files for testing streaming video and playing multimedia.
Installing and configuring ntfs-3g-utils from Opkg Entware for Keenetic from enpa
MT7615 Wireless Driver Information 4.4.1.2 from Padavan
Information about capacitors in KN-1010 \ KN-1810 from Ilya Khrupalov
Bridge mode for the optical terminal Rostelecom from healer2001
An example of creating a directory using the command 'mkdir' in the console from enpa
Using Emoji in the name of the Access Point of the Keenetic router from enpa
Registering the MAC address of the host in the Home segment using the console from enpa
Adding the MAC address of the Wi-Fi client device to the white or black list. When will the setting return to WebUI?
Setting up selective routing via imageMaster TOR
Anonymous access requests username / password via SMB \ CIFS protocol
Configuring access to the web interface via the Guest network from enpa
Turn on seamless Wi-Fi roaming and block Internet advertising on Keenetic routers from hwp.ru
4K and KN-1010 bedrocker tuning and testing recommendation
How to make friends with a device with GPON Rostelecom via SFP connector
Installing and configuring the smstools3 package on the Keenetic Giga (KN-1010) router for sending SMS
Example of setting up connection priority for a torrent client from enpa
Setting push notifications and alerts from Keenetic router from enpa
How to set up simultaneous access to files and printers in the user WindowsOS of 0998987
On the TX-Burst function of enpa
TTL lock
Keenetic Recovery
Internet speed testing
http://www.speedtest.net/ru/
https://www.nperf.com/ru/
https://2ip.ru/speed/

Attention! Testing servers are provided by external providers and the results of such tests depend on many technical factors.

Test results from these services can only be used for diagnostic purposes.
Instructions

Internet connection setup:

Install and configure KeeneticOS:

Reset:

Diagnostics:

Recovery firmware:

Reservation

Speed ​​Limit:

Remote access:

VLAN:

Forwarding and port configuration:

Wi-Fi setup:

WPS (Wi-Fi Protected Setup):

Security and DNS:

schedule :

Tunnels: PPTP, L2TP \ IPSec, IPSec, SSTP, OpenVPN, Wireguard, VPN-server:

File server and USB-drives:

FTP server:

BitTorrent Transmission Client:

DLNA:

Digital television:

USB printer:

CLI (command line), SSH:

Modes:

3G / 4G modems:

Digital telephony:

OPKG packages:

IntelliQoS:
Application to manage the router
Firmware


The official version of KeeneticOS
KeeneticOS out of the box

2.10

2.11

2.12

2.13

2.14

2.15

3.00

3.01

3.03

3.04
Debug version of KeeneticOS
Debug - test (draft) release of the operating system. Repeats the functionality that is in the officially released versions of "Release" or "Beta", but also contains additional fixes and new features. The debug version is under development and may contain bugs.

  • Testing debug versions of KeeneticOS is carried out on the forum Keenetic -here.
  • Changelog of debug versions of KeeneticOS -here.
Program for firmware recovery
KeeneticOS firmware catalog

The curator of the topic is enpa


Post has been editedenpa - 14.10.20, 20:21
Reason for editing: Cap



Rep: (269)
* Just55, insert the disc into the usb box with the encryption feature type such a



Rep: (12)
* not_registered ,
Well I would like your tie and put something like luks.



Rep: (269)
* Just55, in entware it seems to be there, try



Rep: (20)
Continuing problem that flies registration devices. At some point I started to sin on the repeater, but today flew Registration connected by wire home computer.
Software version 2.13.C.0.0-3
Where to look / dig?



Rep: (325)
* Trise ,
Delete this setting, save the configuration, reconfigure, save configuration and understand. Register it has devices.
If necessary, use the SLI manual.
If the Help Desk does, but she asks selftest which has Conf information.

Posted on 12/01/2018, 21:39:

* Just55 ,
Why, in the Win / Android is an app that creates a link to the folder where the files / names will be encrypted.



Rep: (12)
* balian007 ,
I would like to bowl, but accessible only to me. And when Unplugging disk, so that files remained closed.
I tried to put on Android with Ruth, but something did not want to work ...



Rep: (325)
Just55 @ 01.12.18, 21:55*
I would like to bowl, but accessible only to me. And when Unplugging disk, so that files remained closed.
I tried to put on Android with Ruth, but something did not want to work ...

I do not know you and that you put - try of the series type Boxcryptor - android / windows, put on the clients, and where and what to choose to taste.



Rep: (78)
tell me a couple of things:
1 - in the settings of the router "Users of Internet-center" ->"Allow access from the Internet" checkbox neither "for HTTP" any "of the TELNET"not worth
I have dedicated ip address redirect all port 80 from the outside to the router itself, and easily have access to the admin panel vneshke ...
it is right and it should be? if so, then why do we need this box, once this way and that work?

to deal with this, if the checkbox is worth, then redirect the port is not necessary, it will be automatic at the port of 80mu work ..

2 - how you can do that would have been on the https connection to the admin panel when you come outside? without KeenDNS ...

Post has been editedxibyt - 02.12.18, 15:11



Rep: (175)
* xibyt ,
And what do you do? Unfortunately it does not work. SSL secure connection is only possible through getting keendns certificate. You can try third-party services, such as no-ip etc.



Rep: (78)
ebsysert1983 @ 02.12.18, 18:28*
And what do you do

Well that would be connected to the outside can be a router .. rarely, but sometimes it is necessary ..
well, it is as if https is encrypted data transfers, safe ..
the meaning is just that I would not use third-party services, so if you use it, KeenDNS, why do something else to fence

Post has been editedxibyt - 02.12.18, 19:22



Rep: (175)
* xibyt ,
Well then, only through keendns, if really quite worried about the safety, use vpn



Rep: (175)
xibyt @ 02.12.18, 21:21*
well, it is as if https is encrypted data transfers, safe ..

If you have gray ip, is nothing to fear.
If the white ip, it is recommended to change the port for telnet and configure the protection against brute force inthisarticle

Post has been editedebsysert1983 - 03.12.18, 06:22



Rep: (78)
* ebsysert1983
White ip default protection enabled, but yes, probably it is necessary to change the settings to reduce the number of attempts for the selection of up to three to increase lockout time to the maximum ..
Well, of course, changed the port first of all))



Rep: (0)
Hello!
Faced with the following problem: suddenly the devices connected to this router by cable (in my case is a computer and a satellite receiver), stopped receiving local IP.
In this case, these devices have been registered in the router and they had a static local IP.
Tried to connect a laptop on cable - the same problem, ie, the problem is clearly in the router.
Has anyone encountered this problem?



Rep: (325)
kovalivan96 @ 03.12.18, 11:27*
Faced with the following problem: suddenly the devices connected to this router by cable (in my case is a computer and a satellite receiver), stopped receiving local IP.
In this case, these devices have been registered in the router and they had a static local IP.

Setting up the router is according conf file, see that it (set of CLI commands reference) there is only a little bit
It can also be accidentally configured number of connections.
known host CLIENT1 xx: xx: xx: xx: xx: xx
...
ip dhcp host xx: xx: xx: xx: xx: xx 192.168.1.2
...
ip hotspot
policy Home deny
host xx: xx: xx: xx: xx: xx permit
...

For Wi-fi access in the new edition

interface bridge0
mac access-list type permit
mac access-list address xx: xx: xx: xx: xx: xx
...



Rep: (1222)
Stable firmware version2.14.C.0.0-0 from 12/03/2018for KN-1010

Component kit
acl
adguard-dns
afp
base
chilli
cifs
cloud
cloudcontrol
components
config-ap
config-client
config-repeater
corewireless
ddns
dhcpd
dlna
dot1x
dpi
easyconfig
eoip
fat
ftp
gre
hfsplus
igmp
interface-extras
ip6
ipip
ipsec
kabinet
l2tp
madwimax
miniupnpd
monitor
nathelper-ftp
nathelper-h323
nathelper-pptp
nathelper-rtsp
nathelper-sip
netflow
ntced
ntfs
nvox
openvpn
opkg
opkg-kmod-audio
opkg-kmod-dvb-tuner
opkg-kmod-fs
opkg-kmod-netfilter
opkg-kmod-netfilter-addons
opkg-kmod-tc
opkg-kmod-usbip
opkg-kmod-video
pingcheck
ppe
ppp
pppoe
pptp
skydns
snmp
ssh
sstp
sstp-server
storage
trafficcontrol
transmission
tunnel
udpxy
usb
usbdsl
usblte
usbmodem
usbnet
usbserial
vpnserver
vpnserver-l2tp
ydns

Changes
2.14.C.0.0-0

New features and other improvements:

• Added support for USB modems Alcatel IK40V; Huawei E5776; TELE2 ZTE MF920V MiFi
• Added the ability to simultaneously use WAN connections in balance mode
• KeenDNS: Added option "cloud access over IPv6" (does not require IPv6 on the device)
• Wi-Fi: added setting of the region option "Kazakhstan" for 5 GHz
• Wi-Fi: improvements in roaming
• Web interface: added Host Traffic Monitor
• Web-interface: integrated context help
• Web-interface: added the function of printing a QR-code to connect to a Wi-Fi network
• Web-interface: fixed bugs
• Transmission torrent client: updated to version 2.94
• Updated OpenSSL library
• VPN: increased number of tunnels
• Kabinet: added ability to set the server port

New features of Keenetic Plus DECT:

• Added auto dial function
• Added setting for early voice call encryption
• Added support for Panasonic KX-TGA806, Panasonic KX-TGA810, Panasonic KX-TGA550, Yealink W52P handsets
• Fixed the problem of replacing the outgoing call number when selecting a line through #
• Fixed export of calls to CSV

(c)https://help.keenetic.com/

Installation process and debug mode
1. Download firmware version 2.14.C.0.0-0
2. Installby file upload.
3. Be sure to dohardware reset to factory settings.
4. After resetting, connect all devices and check the operation of the router.

If after installing 2.14.C.0.0-0 there are problems, you will need to do the following:

1. Disconnect all devices from the router, the Eth-cable provider.
2. Turn ondebug mode.
3. We connect back all devices to the router, the Eth-cable of the provider.
4. Reproduce the problem.
5. Disableshttps://help.keenetic.com/.
6. We send debug self-test fileofficial technical support.

Attached fileKN-1010_stable_2.14.C.0.0-0.zip(19.66 MB)

Mirror:
cloud.mail - v2.04-v2.14 Firmware Keenetic
yandex.disk - v2.04-v2.14 Firmware Keenetic
Picture


Post has been editedenpa - 03.12.18, 16:35



Rep: (543)
enpa @ 03.12.18, 14:45*
3. Sure to You do a hardware reset to its factory ( not necessary )

Because? (:



Rep: (1222)
* fatspirit if there are problems after the upgrade.



Rep: (0)
Do not tell me what could be the problem used to be connected to an external drive, he saw him no problem, but now there is inserted into the computer normally, and the router does not see another disk determines without any problems. The disc looks like he sees all the same

Attached images
Attached Image


Post has been editeduot - 03.12.18, 22:45



Rep: (1222)
* uot, problem in the file system 'ntfs' drive. If there are errors, broken sector in the file system, then it puts up 'dirty' flag. And until you have corrected the error, the section does not register, initialized to ndm system.

You need to check fs partition.


Full version    

Help     rules

Time is now: 12/11/20, 5:32