Xiaomi Mi 5X - MIUI firmware
TWRP_Mi5x.zip
Krokus67, I really think. Especially concerns MIUI and the zoo of its localized firmware. Almost every team contributes to their personal buns, patches and other changes. Therefore, it is logical when changing the firmware from one command to another to make a wipe system. Naturally simple incremental updates does not concern. So I fully support the idea of ​​vipe the system :)
Belowtosha. , Personally, I always put with full cleaning system Posted 11.11.2017, 12:53:
Friends who came across? Viber applications, WathSaap notice notifications, stand in autorun, launch in the background is allowed
[OXYGEN] Xiaomi.eu Miui 9.1 v7.11.16
The original Xiaomi.eu firmware with the already replaced loader.
Just swing, throw on the phone and flash through TWRP.
Post has been editedinferus-vv - 19.11.17, 13:41
The original Xiaomi.eu firmware with the already replaced loader.
Just swing, throw on the phone and flash through TWRP.
Download (MEGA)
Post has been editedinferus-vv - 19.11.17, 13:41
Dear members of the Forum! I appeal for help. I make a mi5x.tiffany device, I stitched the caste firmware from Miui.su. After the latest update Miui9 7.11.9
It stopped turning on Wi-Fi. By the way, this update did not stand up. When installing in Recovery mode, it issued an error7. What can be done that Wi-Fi has earned?
It stopped turning on Wi-Fi. By the way, this update did not stand up. When installing in Recovery mode, it issued an error7. What can be done that Wi-Fi has earned?
Saktaniz @ 12.11.17, 15:28
After the latest update MIUI9 7.11.9
Wi-Fi has ceased to turn on.
Wi-Fi has ceased to turn on.
I have the same thing. And the root flew.
While flashed over the previous Miuisu. Ruth and Wifi recovered.
I decided to fill a port (ROM)AEX12From a friendly site on Ya.Disk
Post has been editedLefey - 13.11.17, 17:47
How to install:
- Unlock the bootloader
- boot into the recovery (TWRP)
- Make a Data and Cache Sacrifice (Wipe Data and Cache Partitions)
- flash zip file
- reboots (can beat a long load from 3-10 minutes)
- boot into the recovery (TWRP)
- Make a Data and Cache Sacrifice (Wipe Data and Cache Partitions)
- flash zip file
- reboots (can beat a long load from 3-10 minutes)
Known issues:
- Fingerprint scanner acts as an unlock button.
Download Android ONE FOR MI5X [7.10.14
from AEX12:]
https://yadi.sk/d/o1tacnli3pdv39.
Link to the source
https://yadi.sk/d/o1tacnli3pdv39.
Link to the source
The authors
AEX12, RAVINDER0003, HELI0US
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based on: Android One
Version Information
Status: Stable
CURRENT STABLE VERSION: 7.10.14
Stable Release Date: 2017-10-21
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based on: Android One
Version Information
Status: Stable
CURRENT STABLE VERSION: 7.10.14
Stable Release Date: 2017-10-21
FAQ
1) It is impossible Updated OTA in Dana Firmware
2) the firmware is not rutovan, the root we get the standard way
3) The transition to this firmware will not solve the trusion from 4G 800MHz Band (B20), you need another modem
2) the firmware is not rutovan, the root we get the standard way
3) The transition to this firmware will not solve the trusion from 4G 800MHz Band (B20), you need another modem
Post has been editedLefey - 13.11.17, 17:47
Reason for editing: Added to header
MOD MIUISU based on 7.9.14 forMI5X OXYGEN Type 2
Post has been editedLefey - 13.11.17, 17:59
What is done
The version is made under Oxygen, you can also put on Tiffany, just replacing the aboot on your native from Tiffany;
Cut Google programs (except Google Play);
Chinese MI programs are cut out, including mail, browser;
Replaced bootanimation;
Disabled the update (now MIUI covered itself 9.2 stable);
Small edits (Build Prop, Host).
As for me: It works fine, notifications come all the sound, the sound is excellent, the heating is also moderately positive, there was no departure and bugs for a week. If there are questions - please in Kumys.)
Cut Google programs (except Google Play);
Chinese MI programs are cut out, including mail, browser;
Replaced bootanimation;
Disabled the update (now MIUI covered itself 9.2 stable);
Small edits (Build Prop, Host).
As for me: It works fine, notifications come all the sound, the sound is excellent, the heating is also moderately positive, there was no departure and bugs for a week. If there are questions - please in Kumys.)
Installation
Unlocked bootloader;
TWRP;
Full WIPE - (DAVLIK / CASHE, DATA, SYSTEM);
Zip installation;
Reboot. (Waiting time is about 5-7 minutes).
TWRP;
Full WIPE - (DAVLIK / CASHE, DATA, SYSTEM);
Zip installation;
Reboot. (Waiting time is about 5-7 minutes).
Post has been editedLefey - 13.11.17, 17:59
Reason for editing: In the header
Hello everyone, I want to buy this device, it is this and not A1, it hurts me Miui the shell. He studied the cap and realized that there were 2 options: Tiffany and Oksigen, as I understood better to be Tiffany. How to check, I understood, just how to check in the store, or explain to the seller for example on OLC? Since it is not to connect to the PC in the store, and the sellers in nete may not want to bother!
It seems to hear that after the release of A1, the Chinese blocked the bootloader so that they could not go to the pure android. I want to ask experienced owners:
1. Are there any problems with unlocking now?
2. How to check the version (Tiffany or Oksigen) without a PC?
With me +
It seems to hear that after the release of A1, the Chinese blocked the bootloader so that they could not go to the pure android. I want to ask experienced owners:
1. Are there any problems with unlocking now?
2. How to check the version (Tiffany or Oksigen) without a PC?
With me +
OxygenorTiffany?
How to find out what type of device without PC and third-party programs:
- Turn off the phone, and turn it on, onOxygenIt will first highlight the black screen, and only then the download with the MI logo and run three points. OnTiffanyWhen you turn on, the logo mi should immediately light up and then go loading - (run three points).
- There is another option, it turn off the phone, clamp the volume button minus and inclusion, if the FastBoot has not appeared means -Oxygenif it appeared thenTiffany.
Post has been editedOnlineLight - 13.11.17, 14:25
How to find out what type of device without PC and third-party programs:
- Turn off the phone, and turn it on, onOxygenIt will first highlight the black screen, and only then the download with the MI logo and run three points. OnTiffanyWhen you turn on, the logo mi should immediately light up and then go loading - (run three points).
- There is another option, it turn off the phone, clamp the volume button minus and inclusion, if the FastBoot has not appeared means -Oxygenif it appeared thenTiffany.
Post has been editedOnlineLight - 13.11.17, 14:25
all a good day!
Acquired Xiaomi Mi5x from the seller (Fantacy Technology) on the Aliexpress court. The phone came with a stable English firmware.
According to the instructions, I checked the type of product: turned out to be Tiffany.
In accordance with the instructions unlocked the loader, waited 72 hours.
Then installed TWRP. Everything was established normally. I went to TWRP and squeezed Advanced Wipe (removed the checkbox with OTG), the memory card was not installed.
After Wipe, the computer saw the phone, created the folder at the root, titled Firmware and posted there Xiaomi.eu firmware (version 7.11.9). I flashed this version and after completing it performed Wipe Cache / Delvik, executed the reboot. The phone did not boot and turned into a "brick".
I tried to hold the "volume up + power" to get into TWRP - it is useless. No reaction on the "volume down + power" and on their combination.
In the COM device manager, the Qualcom port is determined, tried to flash via Miflash (without closing the test point), it gives an error.
Please inform how to unveal?
thank.
Acquired Xiaomi Mi5x from the seller (Fantacy Technology) on the Aliexpress court. The phone came with a stable English firmware.
According to the instructions, I checked the type of product: turned out to be Tiffany.
In accordance with the instructions unlocked the loader, waited 72 hours.
Then installed TWRP. Everything was established normally. I went to TWRP and squeezed Advanced Wipe (removed the checkbox with OTG), the memory card was not installed.
After Wipe, the computer saw the phone, created the folder at the root, titled Firmware and posted there Xiaomi.eu firmware (version 7.11.9). I flashed this version and after completing it performed Wipe Cache / Delvik, executed the reboot. The phone did not boot and turned into a "brick".
I tried to hold the "volume up + power" to get into TWRP - it is useless. No reaction on the "volume down + power" and on their combination.
In the COM device manager, the Qualcom port is determined, tried to flash via Miflash (without closing the test point), it gives an error.
Please inform how to unveal?
thank.
Klema1984 @ 11/13/17, 08:58
I tried to hold the "volume up + power" to get into TWRP - it is useless. No reaction on the "volume down + power" and on their combination.
The impression is that the battery is discharged .. try to charge.
Well, you can try to press the power button up to minute, must vibrate ..
Klema1984. , Move the device in FastBoot mode, make sure that all drivers are standing in Miflash your COM is defined. Download the official firmware, unpack and drop the folder with the firmware to the root of the disk C. Then rename the folder with the firmware for example "MI5X" (rumor goes.something strange. Tiffany's body. Application for unlock filed Dana, the term is already approximately now. At first he checked 72 hours, then she showed less. Now the time to unlock. I go to the anlocker writes 287 hours. Type of this. What kind of pig the Chinese decided to put?
Krokus67, Verified. This information is taken from the system and not from the bootloader. And the bootloader is about that and the bootloader that its task is to perform the necessary checks when starting and run the further process of loading the system. In general, the bootloader does not transmit anything to the system, and the system does not take anything from the bootloader.
The only reliable way to find out which bootloader is set, is described in the header. And I did not hear what difficulties to determine the type of loader according to the instructions from the header. I simply painted everything in very detailed, each action so that anyone could do it.
If briefly, this instruction can be represented in a very short form:
1. Start the phone in fastboot mode and connect to a computer.
2. Execute the command fastboot getvar product.
You can of course check:
OnLineLight @ 11/13/17, 07:39
Oxygen or Tiffany?
How to find out what type of device without PC and third-party programs:
- Turn off the phone, and turn it on, on the Oxygen will first highlight the black screen, and only then it will be loaded with the MI logo and run three points. At Tiffany, when turned on, the MI should immediately light up and then go loading - (run three points).
- There is another option, it turn off the phone, press the volume button minus and turn on, if the FastBoot has not appeared means - Oxygen, if it appears - Tiffany.
How to find out what type of device without PC and third-party programs:
- Turn off the phone, and turn it on, on the Oxygen will first highlight the black screen, and only then it will be loaded with the MI logo and run three points. At Tiffany, when turned on, the MI should immediately light up and then go loading - (run three points).
- There is another option, it turn off the phone, press the volume button minus and turn on, if the FastBoot has not appeared means - Oxygen, if it appears - Tiffany.
But these are subjective methods of checking, misunderstanding about the MI logo, about three points, etc.
Good day! Finally came the long-awaited MI5X Tiffany
Friends, tell me, whose localized firmware (Xiaomi.eu, Miui Russia, Multirom) better put? I understand that everything is individually and an amateur, but suddenly noticed, who have less bugs in the last firmware ...
Friends, tell me, whose localized firmware (Xiaomi.eu, Miui Russia, Multirom) better put? I understand that everything is individually and an amateur, but suddenly noticed, who have less bugs in the last firmware ...
pancake. What is the stand? The second apparatus also postponed unlock at 284 hours. Two apparatus with new accounts were. At both at first it was 72 hours. And today, when such a point from the Chinese came the time of the unlock. No one came across? In the course, I do not in vain, I do not like the number 13 .....
Post has been editedip-han-stanislav - 13.11.17, 18:06
Post has been editedip-han-stanislav - 13.11.17, 18:06
Good evening. Tell me if you put the local firmware if the updates will fly and is it necessary to update? Or in manual every time you download the update and update. Tiffany phone
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement