abc145 @ 15.09.17, 21:31
By the way you can try to glue the magnet to the awakening / backfilling will occur at the opening / closing cover of the Hall sensor. Place this sensor I fumbled with a magnet, it is the height if you start from the cover between the fourth and fifth root cut in from the left edge of the screen, experimented by raising and lowering the magnet - lock / unlock the screen works! Magnet I have is from another unnecessary boot cut it somewhere thickness of 1 mm and a diameter of perhaps 0.5 cm - round, with gluing until the bother, if inserted into the right-most edge of the top slot for business cards - does not work, we must also to the right and a little higher ...
All felt the exact location of the magnet cut out HTC Dot View of the old cover, cleared it of rubberized base and front and back checked yet without inserts, just put in the right upper edge of the top slots for business cards, he's firmly seated, not loose and not moves even without inserts - works awesome (the default when you open the lid immediately opens the desktop, at the request of the registry can be adjusted to only open the lock screen), the exact place between 5 and 6 cut the spine cover.
Well now glans screen is not particularly necessary became, and LED-LED notifications too, need a double tapas too personally no longer for me (of course as long as the phone in the bag) - the lid was opened, for example to lock screen, notification looked or time - closed. : Lol:
Photo report here later attached.
And rubberized native "wrapper" when inserted into the right edge of the cards would not work infection (she had more and thicken by 2.5 times), on the screen you put in the right place, lift - work, and so there is no ...
Exact seat for the magnet and the magnet itself
Place on the screen - in the middle of the second medium tiles (counting from the top) to the left, in the video where my application "People".
The dimensions of the magnet - 6mm diameter, 0.5 mm thickness, and ledges at the screen of this case 1 mm greater, including cover (which by the way also on your magnet is held and not loose at closing) does not bulges along the magnet and the magnet does not scratch the screen, as
It is under the cloth and glued to the double-sided tape, well, just in case I have there more protective glass is pasted.
the thickness of the magnet in comparison
The system in action in the video:
1.mp4(113.23 MB)
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Shell \ OEM \ SmartCoverSettings \ AutoUnlock (1-desktop (if you do not set a PIN code or a fingerprint scanner), 0 Screen lock).
Cover me
such, 8-9 months ago, I bought, though at another store for 350r. and then took two of these, he was still in front and behind a thin metal plate is protected from kinks, mob. communications do not interfere.
Post has been editedabc145 - 15.05.18, 16:20