-------- How to flash through MiFlash --------
Instructions taken from
Multirom'aThis statement is taken from the official forum, adapted for Russian users, tested an infinite number of times on multiple devices, the majority of listed nuances.
Read carefully. (Please read the point entirely, then do, in order to see all the pitfalls). And I stole from
Multirom'aStep 1.
1.1 Download the fresh MiFlash, hereinafter.
1.2 Turning off the digital signature verification drivers.
For Windows 10:
Hold down the "Shift" button and click "Start" ->"Shutdown" ->Reboot. After the reboot, the "Select Action" window appears. Selecting "Troubleshooting" ->"Extra options" ->“Boot Options” ->Reboot. After the reboot, we will see the “Reboot Settings” window, press “F7” and wait for the Windows to reboot.
For Windows 8:
Press the combination of buttons "Win + I". “Parameters” will come out to the right. Hold down the "Shift" and click "Off" ->Reboot. After the reboot, the "Select Action" window appears. Choose "Diagnostics" ->"Extra options" ->“Boot Options” ->Reboot. After the reboot, we will see the “Reboot Settings” window, press “F7” and wait for the Windows to reboot.
For Windows 7:
While the computer after the BIOS boot phase, often press В«F8В». You will see the menu "Advanced Boot Options". Choose "Disable mandatory driver signing." F8 does not always work the first
times, so if it fails, or may be repeated 2-3 times or to resort to an alternative method.
Alternative: Open the "Start" menu in the search bar write:
right-click on it and click "run as administrator". A command prompt will open. Enter 2 commands in turn:
bcdedit.exe / set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit.exe / set TESTSIGNING ON
Then restart the computer, if everything turned out, then in the lower corner of the desktop you will see an inscription about the test mode.
P.S: in order to return everything to the place, again open the console again and enter:
bcdedit.exe / set TESTSIGNING OFF
and reboot. The inscription will disappear.
1.3 Set Miflash from 1.1. It is strongly recommended not to change the installation directory of the program. And there are no Russian letters in the installation path! During the installation can (or even should) vylazit messages about the installation of unsigned drivers, agree to install all. They look like this (press on the button highlighted in red):
Step 2.
Download the archive with the firmware for the device, always the latest firmware you can find
here(Select your device and the desired type of firmware in Step 2).
Step 3.
3.1 Turn off the phone. Hold the button "Volume -" and "Power". You see on the screen:
3.2 Connecting to a computer smart. It is recommended to use the original cable is not to stick to the front USB ports and not to use USB 3.0.
Step 4.
4.1 Extract the downloaded file in step 2. The name does not rename! And check to
unpacked folder has images and more files folder. Some unpacking when a situation may arise that the original folder - folder with the same name, and has been in her images and more files folder. Here is the dubbing of the first folder you want to remove.
4.2. Next, the resulting folder (check that it is images and more files) is copied to the root of drive C: \ (If there is no space on it, the other root of the drive).
Step 5.
5.1 Go to the folder where you installed the program from step 1. Default:
C: \ Program Files (x86) \ Xiaomi \ MiPhone
5.2 Run MiFlash.exe (
It is desirable as administrator )
5.3 Push the В«BrowseВ», select the folder from the previous point (exactly the folder which contains the images folder without images folder, and the folder which contains the images folder).
5.4 The bottom of the window, in the last line mode, select the firmware, I think everyone understands that flash all the safest mode, but it will erase everything you have on your phone. Flash all except storage devices spare memory, well, flash all except data and storage will not touch the memory and the data well, and in addition does not ensure that there is the sense in your actions.
5.5 Push the В«RefreshВ» in the device window will appear our device, select it and press the В«FlashВ»
5.6 and begin counting after a few minutes in the status column of the inscription appears successful operation, restarts the device itself and begins to run.
Step 6.
You can pull the cord and wait for the first (quite a long time) load.
Post has been editedCherkes001 - 07.10.17, 17:24