> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



ZUK Z2 - Unofficial firmware



Rep: (180)
ZUK Z2 - Unofficial firmware
ZUK Z2131, Z2 Plus
Description | Discussion пїЅ | Purchase пїЅ | Accessories пїЅ | Marriage and Repair пїЅ | ZUK Z2 Owners Club пїЅ | Lenovo Fans Club пїЅ | Power consumption (autonomy) пїЅ | Discussion camera ZUK Z2 пїЅ | Official firmware пїЅ | Unofficial firmware пїЅ



Important information!
  • Before proceeding with informal firmware on the basis of official ZUI (Franko76, GizROM, etc.) on the basis of informal firmware on AOSP, LOS, etc. recommended (!) flash smartphone official ZUI through QFIL, then unlock the bootloader and install TWRP. Otherwise, you may experience various problems after the transition from the informal to the ZUI AOSP firmware via TWRP.
  • Important for the work nuclei Snapdragon 820: CPU Snapdragon 820 consists of two clusters 2 cores (technology big.LITTLE) with frequencies up to 1.6 GHz and 2.15. respectively, according to the algorithm work is always active 2 cores, the remaining 2 are included in the performance of some demanding tasks.
  • Post a link describing big.LITTLE technology.

Drivers and Utilities
Unofficial firmware
Android 6.x
Android 7.x
Android 8.x
About F2FS system on Android O
AOSP:
LOS:
Archive
Android 8.0:
AOSP:
LOS:

Android 8.1:
AOSP:
LOS:
Android 9.x
LOS:
CAF:
AOSP:
The rest of the firmware:
Archive
LOS:
AOSP:
The rest of the firmware:
Android 10.x
AOSP:
LOS:
Archive:
AOSP:
LOS:

Android 11.x
AOSP:
LOS:
Archive:
AOSP:



Instructions
Custom Recovery and Kernels
Recovery:

Kernels:
Treble for Android firmware 9 and 10with version 4.4.x kernels:

For Treble firmware Android 8 and 9with version 3.18.x kernel:

For Partial Treble firmware:

For firmware Non Treble:

7 firmware for Android:
Archive
Useful
Screenshots Polls / Surveys / Customer Reviews
Survey Screenshots
Choose the best unofficial firmware - 03/21/17
Attached Image

Help newcomers to choose - 06/30/17
Attached Image

What is the custom firmware you use every day - 09.19.17
Attached Image
Attached Image

What firmware based on 8.0 / 8.1 do you use?
Attached Image

What assembly on Android Q you think suitable for everyday use?
Attached Image

Choose a side shell / fork ZUI / MIUI for comfortable everyday use
Attached Image

The most suitable for the everyday use of ROM on Android 10.x in your opinion (from 09.09.20)
Attached Image


Reviews and user reviews on the different firmware



Post has been editedmellowmaniak - 09.01.21, 15:50
Reason for editing: The missing roms are added to the firmware section on Android 11.x



Rep: (11)
Rus102102 @ 06/29/17, 21:42*
Install any stock fresh through QFIL

ZUI 2.5.412 - the freshest stock, wipes.
p0pa_vot @ 06/29/17, 21:44*
Recovery Last Official Put and Will Akh

Well, the recovery can and not the most last 3.1.0.0, it seems, but now the question is not about AEX, but about the alarm clock.
K
Read carefully the cap threads!


Post has been editedSergsinger - 29.06.17, 22:10



Rep: (8)
I do not know, here or better in the discussion ... It seems like Hi-Res sound on 7 Androyda. The last AIP is plus different manipulations. Indeed, this is the desired result or just a deception of the system until I know. I will still deal with and listen. In the meantime, there is no desire to include VIPER))). The sound is exactly better than through the OpenSL output (speech about Poweramp).
Attached Image


Post has been editedandbrother - 29.06.17, 22:07



Rep: (0)
Dear knowledgeable people help please try to put a zoo 2.5 through the TVP VER3030 now the phone is cyclically rebooted, after tried to make a return to the save that made the firmware before installing (sailing 2.3) the same. Then I found a spoiler that you need to update the TVP through ADB, I found an adba and then I don't know. In detail please, otherwise I am nowhere to go further. Threat Wipe before the firmware did, the laptop on the wines of HP stitched with the driver of the tooth 1.0.6 of the Lorserels without Kualcom drivers if it is important.

Post has been editedzukuser. - 29.06.17, 22:10



Rep: (225)
AndBrother @ 06/29/2017, 22:06*
I do not know, here or better in the discussion ... It seems like Hi-Res sound on 7 Androyda. The last AIP is plus different manipulations. Indeed, this is the desired result or just a deception of the system until I know. I will still deal with and listen. In the meantime, there is no desire to include VIPER))). The sound is exactly better than through the OpenSL output (speech about Poweramp).
[attachment = "10592896: screenshot_20170629-205153.png"]

About these crutches have long been written in the FAQ. I also seem to sound with them better. SOX resampler included?



Rep: (8)
* .: Sid:. Yes, included. I'll go, I read, before it did not seem to see anything like that)))

OFTOP: in the topic Neutron saw. To check the output of the audio, you need to view the content of the HW_PARAMS file on the path / Proc / Asound / Card0 / PCM0P / SUB0. (Other numbers are possible). So or not, but I write 48khz ...

Post has been editedandbrother - 29.06.17, 22:43



Rep: (0)
I do not want to join but in my opinion the last update of Linejos from Varaton finally added solidly autonomy to the phone, I can say that for 2.5 months of sitting on the lineage, only very rare application deposits remained problematic, and that's it.

Post has been editedGugik1983. - 29.06.17, 22:44



Rep: (0)
I do not know what branch to ask: Is it possible in an informal firmware to put the Zukovsky SafeCenter (a very convenient black list there, and did not find the built-in emergency room in Lineage)?



Rep: (40)
* yjvfl , it is possible in more detail about what function is we talking about?



Rep: (0)
* 100sonchik , did not miss the calls (often black lists pass the first beep), conveniently (with one click) could be turned off the emergency and saving history (call time and text SMS) without notifications

Post has been editedyjvfl - 30.06.17, 00:30
Reason for editing: Premature Departure



Rep: (23)
Vovan9084 @ 06/29/2017, 15:02*
Friends who tried the last DU than it stands out among the rest. Should I go to her with AEX? I want something new.

It is not worth 3 devices per do and one on Axa - there is no special difference, Akeks is not excluded.



Rep: (40)
* yjvfl In the dialer in the settings there is a call blocking item. Try. I just don't use so, I will not tell you exactly



Rep: (17)
I put the last DU - with the modem recommended from David and with the last of the designer of Indian. From David, a stable signal, but for some reason it catches H +, even if you can catch 4g and sit stable on it. From the flow of the modem immediately catches LTE and sits on it, everything flies, only once and an unknown amount of time, at least once a day, at least five times in a row, departs Simka. There were also bugs on the du, serious, so I switched to the last RR from Fedor. She is also not ice, the battery is smart enough, it is not clear because of what, I did not understand, I did not understand. Just from the box immediately started to fly the battery. And in active mode, only, but much faster than on other customs. The browser is eternal error issued. I will return to Holy India 2.5, for I do not understand this, and it's too lazy to understand +) Du on the interface I liked very much, but the bugs were even more than on PP. By the way, I put the moku - not established. In no way. Changed TVGP. Put the stock later TVP. I put the flow on the other caste then the moku, also nothing. Spat. Jaguar also could not put. I tried in different ways, not put. I tried exactly the latest versions of the firmware, maybe the previous things would be set.

I noticed that at absolutely any custom, for which I put a modem from the last India, the network begins to fall off. And the comrade tried to put different modem from Hacker to RR from Hacker - eternally dumped sims. I tried with different TWRPs, after the castoma and flow, after the firmware and before the firmware. Dumping sims. Interesting pattern.

Post has been editedSergsinger - 30.06.17, 02:40
Reason for editing: Rules 4.9.



Rep: (632)
EUI 5.9 mm. (go to zukfans )
Attached Image

I want to present to your attention the EUI firmware that LEECO uses for its devices.
The firmware is based on the 6th version of Android, has been added English.
Energy efficiency and high level stability, while the visual component has questions.
Software errors
I do not possess sufficient information about these errors. You can leave your comments in the subject after try this firmware.
(On another site, from the same author, it is indicated: problems with autowarity and heat heating!)

Screenshots:
Attached Image
Attached Image
Attached Image
Attached Image

Attached Image
Attached Image
Attached Image
Attached Image


Installation:
Make Wipe Data, Cache, System and Dalvik, make Factory Reset
Install the firmware (4-5 min.)
Reboot to the system
The first load is about 10 minutes.

Download link



Rep: (632)
K
The survey is over.
Thanks to everyone who accepted participation in it!



Rep: (1)
Hello everyone. Just, for the installation of custom firmware, if it is already worth the custom, in short to change the firmware. It is necessary to roll the stock through the cuffyl? I want Moque to try to come from that very much.



Rep: (17)
* wanodok,
In theory you can not roll. At least I always have those firmware, which was normal for the drain, put on each other and the difference I did not notice. But they advise you to put always on stock. Although I do not understand why, if all the wipes do. The main thing that I noticed is after the modem brick turns out. If you first install the modem, and then the firmware, all the rules always. Although now now (the truth, there is nothing to do) first put 6 Decks of India, then I want to try.

Post has been editedVirussizov - 30.06.17, 05:56



Rep: (5)
So does not work Ok Google, what to do forum users?



Rep: (5)
All good day! Tell me whether it makes sense to go from 2.5.412 China (Russified) on the firmware via TWRP, considering the option of RR from Fedor or maybe what else will you advise, is there any sense in TWRP? I want a stable firmware with more or less optimized work, a fully functioning button and low heating in games, applications. (I certainly understand that the phone with a powerful processor and in plastic but 57-60 degrees in the game, flickering and turning off the phone (it was once the second time I don't want to repeat) as it does not suit it at all).

Post has been editedFerro911 - 30.06.17, 08:40
Reason for editing: to be clearer! = -)



Rep: (1)
* Ferro911 So go through, if you think that it is in the firmware.



Rep: (1)
* Virussizov , AEx Try


Full version    

Help     rules

Now: 13.01.21, 16:20