HomTom HT7 PRO - Firmware



Rep: (123)
HomTom HT7 PRO - Firmware
PictureHOMTOM HT7 Pro
Description | Discussion пїЅ | Purchase пїЅ | Development of kernels and firmware for Homtom HT3 Pro and HT7 Pro пїЅ | Firmware пїЅ

Important information
If you do not want to get a "brick" with the OTA update, then you need to install a stock recovery, and remove the ROOT.
Before installing the firmware, make sure to backup nvram, and in general all your data.

The device has three revisions:
1. Firmware with XP_VC present - for the second revision. If you have these letters then the second revision, then the first is not.
2.Third Revision Information


Drivers and Utilities
SP Flash Tool- MTK-based flash driver program, instructions, drivers and much more
Drivers for Windows 8 / 8.1 / 10
Drivers - auto installer, run and wait
Rashr- with the help of this utility, you can backup / flash kernels and recovery directly from Android. Root required
Flashify (for root users)- kernel firmware, recovery, kernel backup, etc.


Firmware

Instructions

Recovery: custom and stock

ROOT Rights

miscellanea


There is no curator in the subject. For filling caps, please contactmoderatorssection through a buttonPictureunder the messages to which you want to add links.

Post has been editeddraiv88 - 23.07.18, 01:49
Reason for editing: TWRP for 3rd revision



Rep: (123)
Instructions on firmware in Flash Tool.


Instruction
THE TELEPHONE DRIVER, ADB, PRELODADER SHOULD BE INSTALLED
And it is desirable to make a backup of the system, or separately the date section in TWRP.

1. Create any folder (without Russian letters and preferably in My Computer - Local Disk)
2. We unpack the Flash Tool and the archive with the firmware there too
3. In the Flash Tool, select MT6735M_scatter.txt (located in the folder with the firmware), after which all the firmware files themselves will be added to the flash tool, or specify the path to the filessystem.img boot.img recovery.img and so on.if they are not automatically found themselves.
It is desirable to flash in the mode "Firmware Upgrade"
4. Click Download, and connect the turned off device to USB, if nothing happens, we distort the battery.


Post has been editedMail halilov - 08.04.16, 09:21



Rep: (18)
bulat_kara @ 08.04.2016, 07:07*
firmware 1.1.3 that new

modified upper and shutter bar)))



Rep: (123)
Getting ROOT rights without a PC.


Instruction
1. Download the latest version of KingRootDOWNLOAD
2. Enable installation from unknown sources (Settings>Security>Unknown sources)
3. Enable USB debugging.
4. Turn on data / wifi
5. Install KingRoot
6. Open KingRoot and click "Try"
7. Get Root (wait 100%)
(If it doesn't work out, you can try it several times. Try to clear the data from KingRoot when you try again.)
8. Restart the device.
* The phone may reboot several times.
.


Post has been editedMail halilov - 26.02.17, 06:10



Rep: (123)
Installing TWRP recovery without a PC.


Instruction
1) Get ROOT rights for this instructionZhMAKS
2) Download TWRPDOWNLOADand throws it in the root of the memory.
3) Download and install RashrDOWNLOAD
4) Go to Rashr, grant ROOT rights.
5) In Rashr, click on "Recovery from memory", and select our recovery.img, click "yes", wait a little, then click "ok" and get into TWRP.
6) Done.



Rep: (8)
ROOT yesterday received without dances with a tambourine. I filled the first firmware and then immediately (actually once did boot with the new firmware) rekaveri. Download to rekaveri leafed through it looked and decided to shut down what was proposed to get ROOT agreed happily. And it was received by root. Trying to get through KingRoot Ruth, nothing worked. Something like that ))).

Post has been editeditrnn - 08.04.16, 10:59



Rep: (0)
The men help out. I downloaded on Wi Faya updates. error when installing issued, and the phone will not boot, hanging logo and everything. Tried to flash after flash Tulsa, nothing happens when you connect your phone. the program does not see phone. although it is charged, and scraping on laptop when connected. Driver put ODB universal, can they matter .... tell me who knows what.



Rep: (6)
Immortalnt @ 08.04.2016, 19:41*
and scraping on laptop when connected

And you have not eight hour? ;) There zhesh driver need with a tambourine dance ...



Rep: (39)
Immortalnt @ 08.04.16, 21:41*
The men help out.
It was necessary to put in place stock rekoveri TWRP before updated. And to Flash Tool exact problems with the drivers. Look at the driver instructions. The cap is.



Rep: (162)
itrnn @ 08.04.2016, 12:56*
ROOT yesterday received without dances with a tambourine. I filled the first firmware and then immediately (actually once did boot with the new firmware) rekaveri. Download to rekaveri leafed through it looked and decided to shut down what was proposed to get ROOT agreed happily. And it was received by root. Trying to get through KingRoot Ruth, nothing worked. Something like that ))).

I confirm! Set to default firmware as soon as it flashed the TWRP recovery, are not loaded in the system went into rekaveri, put a tick on the first page, swipe, translated in the settings the language to Russian, when loaded into system proposal to get Ruth right boot into the system, there is Super SU



Rep: (0)
Jony.Q @ 09.04.2016, 00:25*
It was necessary to put in place stock rekoveri TWRP before updated. And to Flash Tool exact problems with the drivers. Look at the driver instructions. The cap is.

I stood stock and do not change anything. Ruth was the only King. Does anyone have a driver that exactly fit? and that already went through a bunch of nothing ...



Rep: (123)
Guys, as I understand it, if the ROOT rights are right, then you can not be updated by air?



Rep: (162)
Mail Halilov @ 09.04.2016, 10:07*
Guys, as I understand it, if the ROOT rights are right, then you can not be updated by air?

Rekaveri must be stock because of rekaveri update installation, and Ruth can interfere sometimes, it is better that it did not exist!



Rep: (0)
Guys fleshtul why the program does not see phone. when you connect your phone off COM connectors, which appears for a few seconds and then disappears. MTK Droid tuls also does not see ... the first time such a problem ... Until that many sews phones ... but it does not see the program and all ...



Rep: (8)
If the drivers are already in the system, try to remove the battery from the phone and flash in this form. Fill the firmware is then laid out, carefully check that the skater from our phone. Fleshtul version 5 which I took then to lay out, in press fleshtule download and then connect the phone (without batteries).



Rep: (8)
Connect now to experiment with their switching off and on the phone - fleshtul not see him.



Rep: (2)
I wonder whether the firmware from a pro like that alter under normal HT7? Camera quality is good about?



Rep: (39)
If you have Windows 8 and more, it is necessary to disable the scan drivers subscription. In another way, the wood is not set.



Rep: (162)
itrnn @ 09.04.2016, 12:19*
Connect now to experiment with their switching off and on the phone - fleshtul not see him.

On the computer despetchere devices that happen? During the connection, if anything, lead change, if an unknown device, any USB Driver from Android to the device must be installed



Rep: (0)
Thank you all) to the office site fleshtul I took off and he saw the phone



Rep: (3)
After talking with this phone for several days, I noticed some jambs, quite critical for me.

1. Very poor communication with the TELE2 operator. Other phones are easily caught at home, I plug in the HT7 Pro and the connection becomes unstable.
While lying on the table, there seems to be a connection, just pick it up, it disappears. I already changed the SIM card to the modern one and with the settings
TELE2 was tormented, nothing helps. Although other operators catch with a bang.

2. When talking, the interlocutor hears me only when I “press” the phone to my mouth. Allocate 2-3 cm. And the interlocutors complain of audibility
(however, this problem is definitely not just for me alone).

3. When you turn on the phone basically connects to the Internet in 3G mode. After forced connection to the operator in 4G mode
starts to work fine. Although the network settings are "Preferred 4G", but he doesn’t want to connect.

4. Well, of course the battery is just that ...: girl_cray: What are 3000 mA there? When working with a phone, the charge lasts a maximum of 3 hours. This is not watching movies and stuff.
Just the usual work on the Internet. True, I do not turn on the power saving mode, but it seems that the screen eats up 2/3 of the battery.
Although in standby mode, the energy is quite "tolerable."

Maybe of course this is the kind of device I got ... :-(

Tell me if anyone knows, maybe something can be fixed through the engineering menu or will the following firmware help?


Full version    

Help     rules

Now: 18.01.21, 16:38