Xiaomi Mi 5 - MIUI Firmware
Activationregular (Official, native) root
the example of China Developer ROM 6.5.19
* To complete this procedure, you will need tounlock bootloader. Look for instructions inrelevant topic.
Ruth is activated and enabled through staff AppSecurityin sectionPermissions.
After installing the firmware on the phone with a locked bootloader inPermissionsyou will see the pointAbout root access
 |
that it contains information about what to gain root access you will need to unlock the bootloader and how dangerous it is
 |
1. Unlock bootloader
2. Go to the staffing applicationSecurityin sectionPermissionsand pressAllow root access
 |
2. Place the bird neari understand the risks of root accessand clickRoot access
 |
In the automatic mode, to download a patch
 |
The phone will go on the restart and install it
 |
3. Root is. Now you need to run the program, which he is required to work, so she asked for these rights by the phone. For example MoreLocale2
4. Again, go toPermissionsandRoot access
 |
6. Turn the switch in front of the required application
 |
7. Five times (no joke) agree with the warning
 |
 |
 |
 |
 |
8. All!
 |
P.S. Who needs it? I, for example, the enemy of unofficial firmware, but I need a Root.
Post has been editedaron140519821 - 25.05.16, 21:11
Reason for editing: Added to header
kalya55, So is this a problem? I here the other day a man painted, and here I can quit.
Instructions for flashing partitions via fastboot
What you need to have before.
1. Knowing how to set your phone to fastboot.
2. Utility fastboot.
3. Any official firmware. Do not cast.
Just please note that you have to erase all the phones. Yes, absolutely EVERYTHING.
In general, if you will secure, here.
How to enter the bottle and open the command prompt, I hope you know.
You need any PF firmware can be virgins, can be Global, the main thing that is not a custom ...
Unzip it completely
Inside a lot of files, we are interested in only those with the extension .img
boot.img
recovery.img
and so on
Now the process
Transferred bodies in fastboot, open a Command Prompt
check whether your phone
fastboot devices
If everything is OK, we start
fastboot erase (they substitute the name of each section)
for example,
fastboot erase system
fastboot erase persist
fastboot erase dummy
etc.
When will move all partitions, move, in fact, the firmware
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash system system.img
ie command fastboot flash, is "set", then the name of the section, then under the name of
IMPORTANT POINT
register should be exactly the one in the title, that is, if suddenly a section called "TwRp", then you still have to write, otherwise "TWRP" does not work.
AND FURTHER.
You can not remove all the first, and install it. You can take turns
One removed immediately established, then we removed the 2, 2 installed
For example:
fastboot erase boot
fastboot flash boot boot.img
fastboot erase system
fastboot flash system system.img
Here, in general, and all. Nothing complicated, but you need to be very careful
Read the results after each action. In case of success will be the numbers, and something like Done.
In case of failure - Fail.
Like so.
After all this is done, write fastboot reboot
1. Knowing how to set your phone to fastboot.
2. Utility fastboot.
3. Any official firmware. Do not cast.
Just please note that you have to erase all the phones. Yes, absolutely EVERYTHING.
In general, if you will secure, here.
How to enter the bottle and open the command prompt, I hope you know.
You need any PF firmware can be virgins, can be Global, the main thing that is not a custom ...
Unzip it completely
Inside a lot of files, we are interested in only those with the extension .img
boot.img
recovery.img
and so on
Now the process
Transferred bodies in fastboot, open a Command Prompt
check whether your phone
fastboot devices
If everything is OK, we start
fastboot erase (they substitute the name of each section)
for example,
fastboot erase system
fastboot erase persist
fastboot erase dummy
etc.
When will move all partitions, move, in fact, the firmware
fastboot flash boot boot.img
fastboot flash cache cache.img
fastboot flash system system.img
ie command fastboot flash, is "set", then the name of the section, then under the name of
IMPORTANT POINT
register should be exactly the one in the title, that is, if suddenly a section called "TwRp", then you still have to write, otherwise "TWRP" does not work.
AND FURTHER.
You can not remove all the first, and install it. You can take turns
One removed immediately established, then we removed the 2, 2 installed
For example:
fastboot erase boot
fastboot flash boot boot.img
fastboot erase system
fastboot flash system system.img
Here, in general, and all. Nothing complicated, but you need to be very careful
Read the results after each action. In case of success will be the numbers, and something like Done.
In case of failure - Fail.
Like so.
After all this is done, write fastboot reboot
Post has been editedaron140519821 - 26.05.16, 10:36
Reason for editing: Added to header
Prompt. Unlock bootloader flashed official firmware MIUI V7.2.4.0.MAAMIDC Global Stable ROM For Mi 5. After you set up and wrote the device that the device is lost and is associated with some sort of left-mi account (not mine). What is it and how to solve? Before the firmware has been associated with my account and no problems! Bought in a sealed box!
Everyone has their own tastes and requirements.
You need to check out the branch and look over the cap of the survey, click to show the result and see the percentage of use of different firmware.
Choose a sami.Ne lazy to read.
The best firmware will be the one that will show itself better on your smartphone, but in fact they are all the same, +/- so to speak.
If you read a couple of pages after the release of the next firmware, you come to the conclusion that they are all getting better and better.
However, after the next release it becomes clear that the penultimate was like everything and not like the last, and so on all the way. Pure water is subjective.
It all depends on the manner of using the phone, everyone has different tasks, no one will give you a concrete answer to these questions. Look in the signatures of the long-livers of the forum, or try to test the firmware yourself for 2-3 days.
Post has been editeddraiv88 - 07.11.16, 18:58
You need to check out the branch and look over the cap of the survey, click to show the result and see the percentage of use of different firmware.
Choose a sami.Ne lazy to read.
Which firmware is the most stable, holds the charge longer, heats up less:
The best firmware will be the one that will show itself better on your smartphone, but in fact they are all the same, +/- so to speak.
If you read a couple of pages after the release of the next firmware, you come to the conclusion that they are all getting better and better.
However, after the next release it becomes clear that the penultimate was like everything and not like the last, and so on all the way. Pure water is subjective.
It all depends on the manner of using the phone, everyone has different tasks, no one will give you a concrete answer to these questions. Look in the signatures of the long-livers of the forum, or try to test the firmware yourself for 2-3 days.
Post has been editeddraiv88 - 07.11.16, 18:58
Reason for editing: Added to header
grafom,
axil31,
axil31,
M
Oftop continue in the same spirit - was jailed for one party in the library, studyingForum Rules
aksaii @ 28.05.2016, 18:50
Who has the 6.5.19 from Hiaomi.eu for rekaveri, skinte pozhaluysta.zaranie grateful
Download: Hiaomi.eu 6.5.19 recovery
Posted on 28/05/2016, 20:25:
Mvv-1004 @ 05/28/2016, 19:16
often loses network Simca TELE2.Proshivka 7.2.4.0.MAAMIDC Global Stable.Kto ever encountered this problem?
YOTA on the same was set 6.5.19 xiaomi.eu and the network stopped falling
Post has been editedOrldim - 28.05.16, 20:52
Duch @ 05/29/2016, 00:50
Apparently waiting for unlock and try to sew something else.
wait for unlock ... with him everything becomes much easier and less bugs
Posted 05/29/2016, 2:25:
qwerfg @ 29.05.2016, 04:04
Let me know, I have ato pochetal something like the air globalka not updated (
updated only once a month about ... and at this stage not all have time to upgrade, for something to last was not so, and it ceased to give out ... and so Stabil 7.2.4 Global put themselves through miflesh- full wipe and body unlocked. no bug for the past month, not even hovered never and do not reboot, the only school I was with Simcoe overseas but also decided to issue simple.
Gagarinbd @ 29.05.2016, 01:25
updated only once a month about ... and at this stage not all have time to upgrade, for something to last was not so, and it ceased to give out ... and so Stabil 7.2.4 Global put themselves through miflesh- full wipe and body unlocked. no bug for the past month, not even hovered never and do not reboot, the only school I was with Simcoe overseas but also decided to issue simple.
It is very sad that such new bugs appeared in ofitsialke tapping mode rozblokirovki and better camera, what do you say about xiaomi.eu, it has identically new thing in the air, it is all her advice?
Mazer @ 28.05.2016, 21:55
The self-made between MIUI and 7.x.x.x number stands Global.
not mislead people, there is an official global firmware which you say comes under China samopal, you need to look for another drive letter after the firmware version ...
Phone came with firmware 7.2.8.0 (MAACNDB). There was a lot of untranslated menu, 4G has become unstable, crash settings when you try to go in setting prints in Russian.
Reflash via EDL to 7.2.13.0 from xiaomi.eu. When flashing strained that the firmware has taken 81 seconds when the promised 5 minutes. But everything fell fine. Apparently, the point type-c, and that Firmware posing with tverdotelnika. The problem with the print and 4G gone, translated menus.
BUT! I stopped working mode with one hand. Somebody faced?
UPD: End. Collision with "gestures to zoom" mode. Disabled gestures, everything worked.
Post has been edited- = SaYmonXx = - - 29.05.16, 09:28
Reflash via EDL to 7.2.13.0 from xiaomi.eu. When flashing strained that the firmware has taken 81 seconds when the promised 5 minutes. But everything fell fine. Apparently, the point type-c, and that Firmware posing with tverdotelnika. The problem with the print and 4G gone, translated menus.
BUT! I stopped working mode with one hand. Somebody faced?
UPD: End. Collision with "gestures to zoom" mode. Disabled gestures, everything worked.
Post has been edited- = SaYmonXx = - - 29.05.16, 09:28
grafom @ 29.05.2016, 08:44
For some instructions bet?
I tried on your 3 May.
Realized either through a batch file to set tvrp, put temporarily - all there do not work in Chinese and touch-sensitive buttons, here dumayu- tvrp try to put on a permanent basis, or does not make sense just does not work touch control?
Post has been editedzlatan1989 - 29.05.16, 08:56
zlatan1989 @ 29.05.16, 11:47
touch control is not working
2143940 @ 29.05.2016, 08:58
Without unlocking the bootloader rue and other muti impossible?
sew, I do not see a problem
MiFlash and forth
I saw a couple of positions, but did not understand how and what will happen?
I want to update to MIUI V7.2.4.0.MAAMIDC MIUI V7.2.9.0.MAAMIDC retentive.
Through which you can upgrade? and what firmware download (Fastboot or recovery).
I want to update to MIUI V7.2.4.0.MAAMIDC MIUI V7.2.9.0.MAAMIDC retentive.
Through which you can upgrade? and what firmware download (Fastboot or recovery).
zlatan1989 Yes, and sew through the batch file, just realized just take img file from tvrp 3.0.2 and replace the Chinese this new
Post has been editedAlexPashenko - 29.05.16, 09:09
©savagemessiahzine.com2005-2020 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement