A small guide on xposed for our phone.
Before you put something, we make a backup. I backup via TRWP. IMHO, the best option.
We put the frameworkxposed-v86-sdk23-arm64-MIUI-edition-by-SolarWarez-20160710.zip(7.82 MB)
put through TRWP. (The only moment after activating any module is to reboot the body. So, it’s better to reboot regularly via the button on and not through xposed. I rebooted through xposed and caught the bootlap. I had to restore the copy through a cut.)
We put the shellXposedInstaller_3.0_alpha4.apk(611.84 KB)
as usual arch.
Forremove xposedflash this zip through TWRPxposed-uninstaller-20150831-arm64.zip(299.16 KB)


In my opinion, the best tweak for our firmwarethis. A lot of things can be done in the firmware for convenience and beauty. More tweaks for MIUI hereВ® WSM Tools (Post Anais10 # 32563528), well, the method of "scientific tyke" has not been canceled. Something works, something not.
After installing xposed, the latest version of Yandex Navigator stops working. I managed to run version 1.78 ofof thispost. After the first launch, I gave an error, from the second one I started, but I did not find the location, in general, try, unsubscribe.
Put thisMiThemes_2.4.apk(24.92 KB)
module for installing anyby thatbypassing the official store. Works.
Module for downloading paid themes from the storePaidThemes_1.1.apk(22.16 KB)

All info taken from hereВ® Xposed (Post Anais10 # 43431318)
We are discussing the performance of this program in the profile branchВ® Xposed



Post has been editedgrafom - 01.08.16, 14:52

COFACE TWRP can and does it perfectly well.

TWRP-COFFACE (3.0.0) - No patched boot.img required
TWRP without the need for patched bottles
Requirements:

1. USB debugging
   
2. Unlocked bootloader

Installation :

• Through the batch file: Run and follow the prompts on the screen.
  
• Throughfastboot: place the .img file in the folder with fastboot, then
  • To install, enter the command
    fastboot flash recovery xxx.img
    
    
  • To just boot without installation and leave stock recovery for OTA, enter the command
    fastboot boot xxx.img
  
  
• Update via recovery:install img

Features: For this recovery, you do not need to flash patched bottles, which is very useful if you need root with official OTA updates that you can easily flash through the TWRP item Install.

Download:

• img file: cofface_twrp_recovery_gemini.img (40.83 MB)
  
  
• Russified batch file:TWRP_COFFACE_no_boot_rus.rar(18.19 MB)
  - thankMrEagle

Source onXDA

PS: For RN3Pro there is the same, and it works fine there. Verified Now you check.



Post has been editeddraiv88 - 28.02.17, 20:12

I decided to roll up the installation instructions for 6.5.7, and indeed, in principle, any custom firmware for rekoveri:
the cleanest installation you can think of

Our Mi5 is called gemini in firmware and TWRP should be exactly this name.

0. Restarting the computer to the mode without driver authentication!

1. Loaded without checking the driver signature - download the last Miflash, and install from the administrator, it will deliver a bunch of drivers at once all you need! There is always a hat.
2. Unblock the bootloader officially with the Miflashunlock program (the link will be on the miui website when they give you unlock) (I had a 7.2.8 globale and everything was unlocked ok)
3. Downloading the Android SDK Platform Tools archive (available in the header)
4. Clamp at any time 2 buttons Volume down + hold the power button - we get into fastboot
5. Through miflash, flashing the official Chinese 6.5.7, ticking FLASH ALL tgz firmware must be unzipped to the state of folders, and to be faithful, put in the root of the disk so that the path is not too long! Two links to off site below.
ENG http://en.miui.com/a-234.html
CN there may be more recent firmware http://www.miui.com/shuaji-393.html
6. Boot into the firmware, and at the moment of choosing a language, out of three, you can turn off the phone.
7. Download the ZIP firmware with the same version as the original, previously stitched, with xiaomi.euhttp://xiaomi.eu/commu...rums/roms-download.73/in my case 6.5.7
8. Download TWRP custom recovery for 6.5.7 (link in paragraph 7 there is a DOWNLOAD link to recovery) TWRP_gemini_6.5.7 + .zip orhttp://teamw.in/
9. Unzip the Android SDK Platform Tools and place our downloaded recovery (recovery.img) in the root of the folder.
10. In the folder with the Android SDK Platform Tools, hold down the SHIFT button, right-click and select the "open command window" in the context menu of the explorer
11. Turn on the phone with the help of 2 buttons Volume down + power button - we get into fastboot
12. In the command window, you can enter a command - and check whether your Mi5 is found (you can paste the copied text into the command window with the right mouse button)
fastboot devices
13. flashing TWRP - we write:
fastboot.exe flash recovery recovery.img
14. Restart the phone without turning off immediately keep the volume up + and power until the vibration of the established recovery [/ b]
15. In TWRP, we go to Wipe - we format the DATA partition, otherwise it is password-protected, after the format everything will be unattended,go to the main menu, select reboot to recovery
16. Again in TWRP we go into WIPE - Advanced Wipe, select everything except SYSTEM, you can also mark SYSTEM, but if you are sewing the same version, then canceling SYSTEM wipe will avoid potential problemsgo to the main menu, select reboot to recovery
17. Again in TWRP we go to MOUNT - and turn on the MTP (on the computer the phone should see), we drop the ZIP firmware into it, I usually put it in the TWRP folder
18. As the firmware has downloaded, in the main TWRP menu, select INSTALL and click on our ZIP firmware, everything is waiting for completion, and press REBOOT, the phone will be loaded for 10-20 minutes.
19. If the download takes more than 20 minutes - something went wrong.



Post has been editedPR0100 - 16.10.16, 22:02

But you can not immediately link to firmware 7.2.14 and 7.2.3 for recovery in the header to place? This is for firmware from 7.2.13 from eu (it has a built-in TWRP) and for those who unlocked it and something did not go.

7.2.14 https: //www.androidfil…? fid = 24521665358596279

7.2.3 https: //www.androidfil…? fid = 24533103863137118

No effect

I read this topic for a week to see if I should change my 7.2.94.99 (set by the seller) to the proposed official Global. The firmware is a curve, of course. But, on it, the phone flew and held the charge smartly. But the curvature of the firmware finished beat me. In the end, by a great effort: angry: I managed to workunder the scheme with fastboot via miflash. Stitched 7.2.13.0: comando:. It took about 30 minutes of clean time, with rebooting the PC, installing all the software / firewood and starting the handset after that.

What I got in the end:
1. Russian, if not everywhere, I have not yet found a place where it does not exist.
2. T9 in contacts - works
3. Backup restored everything from Xiaomi cloud
4. Funny fitchi with screen lock.
5. Weather widget works
6. Buttons began to be adjusted and work on these settings.
7. With the Russian language, it was possible to get into the screen lock and fingerprint settings section.
8. Does not crash in the technical section. support (shows Russian and Ukrainian centers)
9. Unable to adjust access permissions for some embedded applications. Before that, I could have everything, if I am not mistaken.
10. Fingerprint, as if it has become even faster to work.
11. Handset, as if it became slower: (I have not figured out exactly yet, but ... it feels like it slows down when opening some applications.
12. I could not connect to MiPCSuite. Writes that you need to upgrade the device. There are no forces for that. Maybe later.
13. The icons have been updated, wallpaper, etc.
14. Charging time has not changed.
15. Sound, picture - have not changed, it seems.

As for autonomy, so far I can not say anything. I hope it won't get any worse! I will try not to forget and unsubscribe to this topic: dance:

I will share the experience. It will be useful.
Who will try to disable through the settings "unnecessary", in your opinion, system applications, be careful. I’ve been looking for the cause of the glitch for a long time. I lost access in the settings to additional parameters.Virtual printer . It would seem, what is the connection ...? But such a story. All note. ;)
More about the decision if deleted -HERE- add with the replacement of the resolution on rw-r-r.
Start and reboot.
P.S. I will add. It looks like on the developer versions of such a connection is not observed. Need to check.



Post has been editedAnatolDv - 01.06.16, 17:57

IMHO - while the best modem from 6.5.7 Developer.
Note. Modem stitching need not the same as you had. Those. If there was a Global firmware, then sew from the Chinese official or Developer. And vice versa.

Post has been editedkalya55 - 24.05.16, 20:07

Get root with the date partition locked (root data encrypted)
only for those whobootloader unlocked

1.1. have the latest workersadb and fastboot (windows: this requires a phone driver (in the header) and files: adb.exe, fastboot.exe, AdbWinUsbApi.dll, AdbWinApi.dll ( here For example, or put android sdk platform tools))
1.2. swingPRO-SuperSU-v2.67.zip And put in the same place where we have adb and fastboot (or anywhere if globally available)
[if twrp is installed go to step 4]
1.2. swing the lasttwrpAnd we put recovery.img in the same place where we have adb and fastboot(or anywhere if globally available)
2. transfer the phone to fastboot mode (turn off, hold down the volume buttons + power until a logo appears and release them)
3. boot in twrp:
4. in twrp itself: ignore the data encrypted, mount system for reading and writing
5. copy zipnik with root to the phone
6. install zipnik using twrp (when choosing a file, go to the root of the file system, go to / cache and select the zipnik with root)
7. reboot (there is no need to clean the cache, etc.)
(optional)delete the zipnik with root from the folder / cache (you can before reboot)

About OTA: because We did not sew recovery - it will take place normally, but the root will fly after the update.
If you changed the system, set up a custom recovery, put xposed, which changed the system, and the like - the OTA update most likely will not work. If you want, delete all your changes and try.

ps
I just checked - OTA update from 7.2.4.0 to 7.3.5.0 global stable, everything went good, but the root fell off.



Post has been editedxlenz - 01.06.16, 10:09

I want to share the results of the attempt to roll back with stable 7.3.3.0 according to the instructions, through DeV firmware (a couple of pages ago was). The last DEV set without problems and questions, but with DEV I did not want to sew on 7.2.13.0 jumped out "Favorite" phrase CAN't Verify Update. When you try to roll back to DEV 6.4.21.0, the result is the same, so I did not work out for this instruction, even more, I can now not for a stable back, nor 7.3.2.0 Nor 7.3.3.0 ... pops up all the same message . Now I am waiting for 7.3.4.0, maybe it will work. If someone knows how to return to stable - I will be glad if the winner).
Of the differences between stable and dev, noted the following:
-in dev he pulled up the time zone, he had to put his hands in stable
-dev in places raises, brakes, in stable did not notice it

b0rzoy

Feedback on firmware 7.3.4 from xiaomi.eu

For 2 days of the bugs of lags, glitches did not notice, except for a small frieze when switching the panel in a curtain from the quick launch icons to messages (MBs, they were just picking up) still auto-durability a little darkens the screen sometimes not the topic - in general, everything is good. Autonomy compared to 7.3.2 grew up on a lot if earlier I had enough for 16-18 hours active use now for a day with a plus (this is an hour of playing in the battle of locks with an Internet asphalt 8 40 min calls post Internet 3g and WiFay (contact plus video ) Music a little bluetooth to mi bend, pictures, display on average 5-6 hours)

Faced with the fact that at 7.3.4 from xiaomi.eu, the incoming photo does not work again (shows the first call after a reboot, then always without a photo). Did hard reset does not help. As a result, in order not to install the root, well, to simplify for all users is a solution. Made a fix through TWRP recovery. Fix installs the incallui file from firmware 7.2.13. And after the launch, the very first call, without a photo (not worried, it should be so), then subsequent incoming calls are always with a photo. Tested.

ATTENTION!!! Instructions for unlocked devices with TWRP recovery installed !!!


Fix for Miui 8 with a new interface (suitable for Miui 7)
fix incall.zip(2.46 MB)



In the evening I will try to rebuild the firmware from xiaomi.eu- with the modified dialer file and the region ru- by default!



Post has been editeddraiv88 - 12.08.16, 20:28

MIUI 7 Global Developer ROM 6.5.20

Made a mirror on the Yandex disk, can someone come in handy

Download: MUIU 6.5.20 Global
Download: MUIU 6.5.20 GlobalID



Post has been editedaron140519821 - 22.05.16, 19:56

In general, I wrote down the firmware based on 7.3.4.0 xiaomi.eu. : rolleyes:
Replaced the dialer (for the correct display of photos). Added by Ruth. Added applicationsavagemessiahzine.com. The default is Moscow time, RU region. The system starts with the Russian language. Worker t9 in the call.
Installation is about 10 minutes. Put through TWRP recovery. With full cleaning. The firmware does not contain TWRP recovery. Can be installed instead of 7.3.4.0 xiaomi.eu
Download






Post has been editedkalya55 - 27.05.16, 20:26

Dear theme curator.
Is it possible to create a questionnaire into this topic to include two questions:
1. What is your firmware installed?
2. And what firmware you consider the most good.
As I am sure that there are many people on this forum that there is simply no time to sort out all the firmware, install them and compare them.

It is strange that you have this mistake, which means you need to put a developer firmware.

After installing GAPS, I get the ERROR RETRIEVING INFORMATION FROM SERVER. [DF-DLA-15].

I tried to delete all the data, did not help. Someone came across?
Thank.

Xperia keyboard

Post has been editedmejor - 01.01.17, 15:44