I am not responsible for the bricks! You do everything at your own peril and risk!

What you need:

1. MicroSD or ADB Sideload memory card
2. The included OEM unlock / item is in the menu "For Developers" / (Look for the word OEM and do not miss), for this you need to unlock the menu "For Developers" (This can be done in the Settings section>About the device and tapknut seven times on the "Build number", you will write "Developer options are included!" (or something similar)
3. Installed USB Driver on PC. You can get it by installing Samsung Smart Swith ( download ), and restart after installation
4. Odin 3.10.7.x
5. TWRP Recovery (.tar): twrp-3.0.0-1-herolte.tar.md5 (36.66 MB)
or fromoff repository
6. Archive with SuperSU (.zip): BETA-SuperSU-v2.68-20160228150503 (1) .zip (4.11 MB)


Instruction:

1. Copy archive BETA-SuperSU-v2.68-20160228150503 (1) .zip to memory card (microSD)
2. Run Odin (the phone must be in download mode ("Volume -", "Home" and "Power"), as with firmware) and in the field "AP" select the previously downloaded TWRP, click "Start" to start the firmware
*** ATTENTION ***
Disable Auto-Reboot otherwise it will be Bootloop !!!
3. When the firmware of your smartphone is complete and you should hold down the “Volume -” and the “Power” button for about 10 seconds and the smart will restart
*** ATTENTION ***
When the screen turns black, even before the Samsung logo appears, pressIMMEDIATELY "Volume +", "Home" and "Power" at the same time for loading into Recovery.
4. You are in TWRP Recovery
*** ATTENTION ***
You can now make changes to the system! Be careful, do something wrong, get a BOOTLOOP! If you have a notification about an unknown / damaged file system, do not touch anything! Just pull the blue slider with the picture (>>>) right! (see screen)

5. Now you have access to mount the memory card (Micro SD)!
5.1. Go to the [Wipe] section ->[Format Data] (not advanced wipe) ->Click "yes". / ATTENTION: If you do Wipe, please note the following - it clears the Internal Storage (INT-SD), disables encryption and makes a Full Reset! /
5.2. Go to the [Reboot] section ->[Recovery]
5.3. Download the archive to clean up the Kernel DN Verification: (You can upload it to your phone without leaving Recovery (via MTP)) no-verity-opt-encrypt.zip (420.51 KB)

5.4. Flash it!
5.5. Flash archive BETA-SuperSU-v2.68-20160228150503 (1) .zip
6. After flashing the archive, reboot using [Reboot] ->[System]!
7. Done!

Congratulations on getting the root!

Post has been editeddiaser - 07.05.20, 09:43

Tell me, in 6.0.1 is it possible to write files to MicroSD from third-party applications without root?

There is the possibility of combining internal and external memory

= AVS =,
Well, I heard about it. Ie, as in 5.0 there is no possibility of recording without root. I am weighing all the pros and cons of putting the root immediately after the purchase of the 18th of s7. Immediately I do not want to lose the guarantee

You have been told above how to do without a root, and you are again about yours.

Post has been editedatte - 14.03.16, 12:16

according tothis newsthere is no join support
but fromhere is this newslink with description how to enable merge does not open

so if anyone knows how to combine storage - please describe

IRONer,
Link opens. Description in English

Posted on 03/14/2016 13:48:

atte,
I tmel in view of without a root, but that there should be an internal memory and a card separately
bullik01,
In step 3 of the instruction, after the TWRP firmware, if you hold the "Power" button without loudness, what happens to the smart? Will it not turn off just? Then go from the off state to the recovery

Post has been editedAleks.74 - 22.10.16, 14:56

Yeah, but there is still a chance to get a bootlap (it’s not just the way you uncheck "Auto-Reboot") ...

Chainfire Auto-Root -Download (SM-930F)(for firmwareG930FXXU1APBF / data from the site Chainfire)
Don't forget about the OEM unlock! ;)
Set via the "PDA" ("AP") button in the "Download" mode (combining the Volume "-", Home, Power)

Post has been editedAleks.74 - 22.09.16, 13:46

Judging by the instructions on Chainfire Auto-Root in English, I realized that if the bootloader is locked, the smart will turn into a brick. Those. You need to unlock the OEM in the developer settings. Plus, after the firmware, the smart should reboot into recovery. So in Odin should be a jackdaw on auto restart. Right?

How to get Ruut on S7 G930F (Exynos) version.By the way, on Snap-e, while Rutting is impossible

Gentlemen, could you comment on the video from YouTube? Does the phone get a root without losing the warranty?
https://youtu.be/8E22XEelTIw

Thank you in advance!

Nancy no video shows how UNROOT can be made (su binary is already in the system, i.e. the phone was previously rutted) on S7 / S7Edge

But is the counter still ticking?

Nancy when he received the root has already passed to the state of 0x1

in the same place the root was made kingo root. su is not there at all. And in the video, Knox is not ticking, of course, the guarantee remains.

And how does this method differ from the standard one, which is with super su?

And what is there then?

Do not consider me as a blonde, but please explain. Tomorrow, like many of you, I will have c7. The task is simple. It is necessary to transfer application data from c6 to c7. Accordingly, you need a root. Having read the cap, I realized that there is no way to get the root without ticking the counter. Or you can still do it like in the video, so that the root is and the guarantee remains?

Post has been editedNancy - 17.03.16, 12:48