Good evening, gentlemen.
I will write the instruction as I installed Android on Voyo V3. 1) First of all download the archive from
here , Thank
Hegehog1989 , unpack, we need Winpe64.iso image
2) Winpe64.iso image is written on a USB flash drive using Ultraiso, for example.
3) Insert a USB flash drive to the tablet, on the device pre-off loaded using the key
Esc , Boot Manager.
4) In Boot Manager, choose Internal EFI Shell, do not miss anything, do not press, waiting for pictures of updates
You can not update the BIOS, but otherwise, when you start, the Android will be an ACPI error error, and as a result, the network will not work, Wi-Fi, bluetooth ..., Windows will also swear.
It came across me to the idea that Linkus anything should work with this bios. As a tablet restarts, we select Internal EFI Shell in Boot Manager again, but this time we skip the installation of the bios, by pressing any key, the process of disk recording and installation of the Android will begin.
5) Next, the android should boot, the first time is not fast.
6) Windows put in the usual way with a pre-prepared flash drive, install on a section size, approximately 45 GB.
P.S. If someone fails to install the driver on the accelerometer, try to install these
G-sensor.zip.(49.56 Kb)
Program for launching android from under Windows
InsydeQ2S_x64.7z(303.44 KB)
Good luck to all!!!
And yes, the author does not bear any responsibility for your spoiled device!!!! Suitable not for all processors and bios, you can overpower the device !!! Post has been editedctich - 22.02.17, 20:13Reason for editing: !!! Not suitable for all processors and bios !!!