> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Lenovo A1000 - Firmware



Rep: (171)
Lenovo A1000 - Firmware
PictureLenovo A1000
Description | Discussion пїЅ | Discussion A1000m пїЅ | games and apps пїЅ | Modifications and decorations пїЅ | Firmware пїЅ | Lenovo A1000 - Marriage and Repair

Important information!
ATTENTION!!!The device has 2 different revisions!
Experienced by trial, error and bricks, it was found that starting approximatelysince the fall of 2016, and already 100% from the winter and beyond 2016 \ 2017 sold devices began to go with a new revision of the screen and \ or touchscreen . It was found out because of one of the users, and then an avalanche of many at once, when flashing any "of old" TWRP, laid out until April 22, 2017 (and new ones are posted in this post ), as well as any custom and stock firmware, except for 30666, there was an artifact in the form of a screen with color stripes and ripples. There was nothing or almost nothing on such screens. Only the drain firmware saved 30666 in the form of a packfile with lenovo-forums.ru . You can read this fascinating thriller (and even for those who have a completely new device) here: Lenovo A1000 - Firmwares (Fasting RZcT # 57917459) Through logical conclusions and experiments it was established that this firmware is 30666, and only it is universal for all revisions. And the firmware below it is suitable only for older devices made before the time specified above. The bottom line is that, starting from 30666, the manufacturer slightly tweaked the new core so that on any revision and any firmware there were no bars on the screen.

In short, the problem with TVRP is solved, new TVRP, suitable for ALL revisions, hang in the cap, no one else will be in the TVRP anymore. As for the possibility of flashing old firmware on the devices of new revisions, it is not so simple, although it is not at all difficult. Read the spoiler "Firmware "--> Lenovo A1000 - Firmwares (Post nemo-nemo # 60718911) .

About the needimmediatelymake a full TWRP backup
This appeal is tofor beginners Topics. If you have recently logged in, and \ or have not done a full TWRP backup yet, then you should take on trust that immediate creation of a full TWRP backup - action, absolutely necessary for you, if you are going to do ANY more or less serious manipulations with the device. The experience of numerous participants in the topic who did not do this, as well as their subsequent torment with IMEI recovery suggests that TWRP backup solves the vast majority of any problems, including turning the device and damage IMEI. It is often impossible even for the radical method of flashing to restore IMEI - with the help of the program Research Download - and your own TWRP backup can ALWAYS do it. Do not put yourself at risk, going to the service center, to waste and nerves - do not be lazy, and immediately after reading these lines make a full TWRP backup immediately ! How to do this - look here in this detailed post: Lenovo A1000 - Firmwares (Post nemo-nemo # 57420760)

Differences A1000 from A1000m
The main, that is, significant, differences in the apparatus consist of two things:

HaveA1000 : RAM 1 GB , internal - 8 GB
HaveA1000 m : RAM 512 MB , internal - 4 GB

HaveA1000 loader NOT blocked by
HaveA1000m loader blocked by

Other characteristicsA1000m can be viewed on the Internet.

Update your phone with ROOT rights


Drivers and Utilities
USB Driver - install in any case. Another link, if the previous problem: - Alcatel OneTouch Pixi First - Firmwares (Fast nemo-nemo # 50204588)
ADB Driver- it is installed only on the working, switched on device with debugging set via USB.

Who will have problems with the above drivers (it sometimes happens), you can take these -Alcatel OneTouch Pixi First - Firmwares (Fast nemo-nemo # 50204588)

Program Download Research Download driver - versions 2.10.1001 and 4.0.0001

Firmware
How to flash the “old” firmware on the new revision device
Who after the firmware "old" (before 30666 ) firmware there is a white \ striped \ strange screen, we read this - Lenovo A1000 - Firmware (Post tocaunt # 45775296) - and then this: Lenovo A1000 - Firmwares (Post nemo-nemo # 60718911)

Official firmware A1000

To date, to recover the device available, there are three firmware: a clean sink 30666, and two by me (curator) of the official 30666:

1) Official stock firmware 30666 as .ras file : https://cloud.mail.ru/public/55xf/5HNd13EwE

2) Stock firmware 30666 as .zip -arhiva to flash through TVRP : Lenovo A1000 - Firmware (Post nemo-nemo # 57223503)

3) Modified firmware 30666 as .ras -file for the program Research Download With integrated TVRP and other minor changes: Lenovo A1000 - Firmware (Post nemo-nemo # 56898589)

4) Official stock firmware 30268 which can be downloaded from this post - Lenovo A1000 - Firmware (post redlys # 101798893) - And at the same time, and some useful information on the restoration of the device is from it.

If you keep any stock firmware in the form of.ras -file, and you are willing to share them, according to a personal supervisor.
Modifications of stock firmware
Custom firmware


Instructions
How to flash the “old” firmware on the new revision device so that there are no color bars on the screen
Be sure to read the owners of devices produced not earlier than the autumn-winter of 2016 and later: Lenovo A1000 - Firmwares (Post nemo-nemo # 60718911)

If the old firmware (up to 30666), or any of the “old” TVRPs are flashed onto the “new” device, there will be color bars on the screen. Therefore, we read and do.

Instructions for firmware via PC
General view of the firmware manual:
  • Disable antivirus and driver digital signature verification. Connect the USB cable only to the motherboard - that is, behind the PC, preferably to USB2 .0
  • Install all drivers from the header
  • Run as program administratorResearchDownload.exe (it can be downloaded in the header, section "Drivers and Utilities")
  • Click the settings button ("gear") and select the firmware file (view name A1000_USR_S29576_1510212227_SPRD7731_ROW.pac) - from here:Lenovo A1000 - Firmware (Post tocaunt # 45775296)
  • After unpacking the firmware, you will see the name of the firmware to the right of the buttons.
  • Click the "start" button ("Play" button, triangle) to start downloading the firmware
  • If a warning box about something pops up - click "Yes", "Yes", "OK", within the meaning
  • Turn off the smartphone, remove and insert the battery, hold down the Volume_Up button, and while holding it, connect the USB cable to the smartphone
  • As soon as the blue stripes run in the window (that is, the firmware starts), release the volume button
  • At the end of the process you will see the messagePassed or Success
  • Be sure to press the "stop" button (square) in order to close the program
  • Remove the cord from the smartphone, remove and insert the battery, turn on the smartphone
Detailed instructions for firmware (raskirpichivaniyu) via PC

Driver installation
  • Downloaddriver
  • Unzip the folder without spaces and national letters in the path to the unpacked files
  • Depending on the bitness of your OS, run as administrator 32install.exe or 64install.exe
  • Restart computer

UNIVERSAL instruction for splicing the device
Unconditional entrance tofastboot(with the system flown and recovery)
Two errors of the Research Download program and methods of their elimination- in addition to the instructions for splitting
Methods for installing TWRP recovery without first obtaining root-rights
TWRP recovery installation method with root-rights
Creating a FULL TWRP Backup and Restoring It
Information about IMEI, instructions for its restoration, about the importance of the FULL TWRP backup
Instruction-2 for the restoration of IMEI, the general post (not yet verified, but who has nothing to lose .....) ---- Direct link to the user manual
Disable logging (deletes a non-fading and swollen folder / external_sd / slog)
Overclocking the processor and setting the performance mode forever
Another instruction for overclocking and automatic control of processor frequencies
Rollback to stock firmware from Lenovo A1000m firmware
The problem of "color and striped" screen after installing old firmware on devices recently purchasedStill:General conclusion
Spreadtrum sc7731 internal memory markup
How to register your IMEI on Android 6.0 firmware
Solving the problem of "blinking screen" when the display module replacement

Modifications and patches
Recovery
TWRP 3.2.2
TWRP 3.2.2 underOptistock 5.1
TWRP 3.2.1

Universal TWRP - suitable for devices of all revisions
Old TWRP - for devices with the first revision

These TVRPs are generally better not to flash if you are not sure that your device was manufactured in the first half of 2016 or earlier! If you are sure or know for sure - you can flash.

Stock Recovery and TWRP 2.8.7.0
TWRP 2.8.7.0 with Lollipop Theme
TWRP 3.0.2.0 - with MTP function
TWRP 3.0.3.0 with support for the official TWRP App - pre-release version, there is a bug with reboot recovery
TWRP 3.0.3.0 - from source, seamless, with additional options- recommended for TWRP installation
TWRP 3.1.0-0- c "proprietary" inscription "Lenovo A1000", recommended for installing TWRP

Reset to factory (wipe data) on the Chinese recovery

How to enter Recovery
Instructions for any recovery
1) Turn off the phone
2) Press the buttons simultaneouslyON + GRMK_VNIZ
3) Almost immediately after that, that is, literally in a second, without releasing the previous two, hold down the third button -GRMK_UPPERH
4) Keep all three buttons until the stock recovery appears, or until the TWRP logo appears (if the recovery is TWRP)
5) release the buttons

Instructions for TWRP
1) Turn off the phone
2) Press the buttons simultaneouslyON + GRMK_VNIZ wait for the beginning and end of a rather long vibration
3) At the end of the vibration, release the buttons and wait for TWRP to enter


Root
Get root through Custom Recovery + TWRP + Cyanogen-Recovery
Instructions for obtaining root rights, custom recovery and flashing the phone without a PC
InstallationSuperSU (getting root-rights) via TWRP
Another way
Magisk SU (SuperSU Alternative) NEW

The method of obtaining ROOT by the recovery itself TWRP 3.0.2.0
For those who have flashed (or will be stitching)pac file with firmware 30318 or 30666 (built into them TWRP 3.0.2.0 ), as well as for those who installed (or will install) zip firmwares 30318 or 30666 via TWRP 3.0.2.0 . The fact is that TWRP 3.0.2.0 has the property that itself is able to install (and kindly offers to install) the program SU-Installer , which, in turn, can automatically install root-rights itself! Details here: Lenovo A1000 - Firmwares (Post nemo-nemo # 56778380) (paragraph 4 )


miscellanea


Topics Curator - nemo-nemo

Post has been editednemo-nemo - 26.11.20, 18:51
Reason for editing: reference to office. Firmware 30268.



Rep: (10)
* Max_Zomboy I can not figure out how to sew? Modifying the kernel is written there

Attached Image


Post has been editednemo-nemo - 30.05.17, 07:22



Rep: (235)
* Xeard,
it is for the firmware via tvrp. by default creates stitches from the installation zip archives, but there is a button called img. press, and from that moment you can safely flash file for this extension.



Rep: (10)
* Max_Zomboy , what to choose?

Attached Image


K


Post has been editednemo-nemo - 30.05.17, 07:57



Rep: (235)
* Xeard,
bottle, of course. the first.



Rep: (0)
nemo-nemo @ 29.05.17, 21:18*
through this TVRP some zip firmware

nemo-nemo @ 29.05.17, 21:40*
There are 2 ways to run TVRP, both in the header: run as a TVRP, or run as a stock. Perhaps the memory is already before the upgrade was damaged. The "iron" is meant not only the chemical element Fe, but in general the whole complex hardware is a smartphone, but it is damaged much harder than beating utensils - here it is a whole, but has shattered all. When your device is manufactured?

The first thing I did while working rekaveri through it zipom sewed, and then to a PC via a wire everywhere ... the result is not loaded phone
Lenovo gets on the splash screen



Rep: (0)
I found a manual kernel firmware only when the working fluid .. Throw a link somebody please as in my case, please make



Rep: (1316)
mo1o4nik @ 30.05.17, 05:46*
I found a manual kernel firmware only when the working fluid .. Throw a link somebody please as in my case, please make

You even rekaveri not loaded, not only in the system? The only way out here - it's like to sew pack file with replacement stock on rekaveri TVRP -Lenovo A1000 - Firmware (Post nemo-nemo # 55215415) , Lenovo A1000 - Firmware (Post nemo-nemo # 55215415). If this fails, then all we came.

There is an extreme option - surgeryerase all flash in Research Download. This erases all memory, after which the firmware completely sewn. BUT! In the first place, and can not help it (although some help). Secondly, after erasing the memory firmware may not want to flash - which means full and final corpse will not even turn on. And thirdly, it clobbered a section in this operation calibration - data on the wi-fi, bluetooth, IMEI and other radio data, with the result that the phone may stop ringing. So if you decide to, you can write me in PM, I will explain in detail how to erase all flash. But - strictly at your own risk!



Rep: (0)
nemo-nemo @ 30.05.17, 09:06*
You even rekaveri not loaded, not only in the system? The only way out here - it's like to sew pack file with replacement stock on rekaveri TVRP - Lenovo A1000 - Firmware (Post nemo-nemo # 55215415), Lenovo A1000 - Firmware (Post nemo-nemo # 55215415). If this fails, then all we came.

According to this instruction stitched and sewed TVRP, then again loaded on startup and freezes .. but on the combination of ON + volume up and down does not respond, may hotkeys changed when TVRP, that is, I can not get into the bottles.



Rep: (20)
* mo1o4nik But as long hanging on the splash screen? Maybe we should wait a little longer? I, for example, after a firmware laospa bodies for a long time to load ... and after flashing distort the battery.

Post has been editedIndeos - 30.05.17, 09:30



Rep: (1335)
How to choose to install apps on the memory card? Firmware CM 12.1



Rep: (74)
Pacrom for A1000

A warning
I am not responsible for any of your actions - all at your own risk.

Port and Base:
Port: Samsung galaxy core prime
Base: A1000

Information:
Android: 6.0.1
Core: 3/10/64

Bugs
bluetooth
3G
internal storage
camera
Wrong signal strength
Disabling WiFi in sleep mode

Download

Screenshots
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image
Attached Image


Post has been editednemo-nemo - 19.05.18, 10:13
Reason for editing: placed in a hat



Rep: (74)
TW 5.1.1 for A1000

A warning
I am not responsible for any of your actions - all at your own risk

Port and Base
Port: Samsung galaxy grand prime
Base: A1000

Information
Android: 5.1.1
Core: 3/10/64

Screenshots

Bugs
audio
The second sIM
hardware keys
Stoke-camera (please see our Google Play Store)
External storage
Brightness (Download * night mode * from play store)
Hot spot

Download
firmware :Click here.
The first patch:Click here.
The second patch:Click here.


Post has been editednemo-nemo - 01.06.17, 15:34
Reason for editing: placed in a hat



Rep: (349)
fixed camera, proximity sensor, and the Internet for Pacrom 6.0.Download
Video recording only works video podlagivaet. Principle is not a critical bug, and later try to correct

Post has been editedLolrd - 31.05.17, 06:09



Rep: (33)
* Lolrd That is, there was only a bluetooth?

Post has been editedAvatarmod - 31.05.17, 06:57



Rep: (349)
AvatarMod @ 31.05.17, 09:57*
LoLrD, that is, there was only a bluetooth?

bluetooth, memory, vpn, bear the same (but it's probably not correct, and it is not Masha)



Rep: (33)
* Lolrd And what is the bug with memory



Rep: (349)
AvatarMod @ 31.05.17, 09:59*
LoLrD, and what is the bug with memory

not mounted (some applications can not see it), and crooked as a whole works



Rep: (10)
Guys when the phone is charging off he goes into rekaveri what to do? Thanks in advance

Posted on 31/05/2017, 11:28:

Guys do not show the phone icon headphones while listening to music they are working there is a patch for some?

Post has been editedSheard - 31.05.17, 11:25



Rep: (1335)
* Sheard , You CM 12.1 I have the same thing nothing bad



Rep: (349)
* Sheard If you have a CM 13 or RR, then the norms, if another firmware, then not the rules. About the headphones is a CM chip and its derivatives, a little google found only the XPosed module for its recovery


Full version    

Help     rules

Now: 20.12.20, 21:46