> Attention!

We strongly recommend to readRules section "Android - firmware"

New threads need to be created only inroot partition! In the future, they will be processed by moderators.



Lenovo A1000 - Firmware



Rep: (171)
Lenovo A1000 - Firmware
PictureLenovo A1000
Description | Discussion пїЅ | Discussion A1000m пїЅ | games and apps пїЅ | Modifications and decorations пїЅ | Firmware пїЅ | Lenovo A1000 - Marriage and Repair

Important information!
ATTENTION!!!The device has 2 different revisions!
Experienced by trial, error and bricks, it was found that starting approximatelysince the fall of 2016, and already 100% from the winter and beyond 2016 \ 2017 sold devices began to go with a new revision of the screen and \ or touchscreen . It was found out because of one of the users, and then an avalanche of many at once, when flashing any "of old" TWRP, laid out until April 22, 2017 (and new ones are posted in this post ), as well as any custom and stock firmware, except for 30666, there was an artifact in the form of a screen with color stripes and ripples. There was nothing or almost nothing on such screens. Only the drain firmware saved 30666 in the form of a packfile with lenovo-forums.ru . You can read this fascinating thriller (and even for those who have a completely new device) here: Lenovo A1000 - Firmwares (Fasting RZcT # 57917459) Through logical conclusions and experiments it was established that this firmware is 30666, and only it is universal for all revisions. And the firmware below it is suitable only for older devices made before the time specified above. The bottom line is that, starting from 30666, the manufacturer slightly tweaked the new core so that on any revision and any firmware there were no bars on the screen.

In short, the problem with TVRP is solved, new TVRP, suitable for ALL revisions, hang in the cap, no one else will be in the TVRP anymore. As for the possibility of flashing old firmware on the devices of new revisions, it is not so simple, although it is not at all difficult. Read the spoiler "Firmware "--> Lenovo A1000 - Firmwares (Post nemo-nemo # 60718911) .

About the needimmediatelymake a full TWRP backup
This appeal is tofor beginners Topics. If you have recently logged in, and \ or have not done a full TWRP backup yet, then you should take on trust that immediate creation of a full TWRP backup - action, absolutely necessary for you, if you are going to do ANY more or less serious manipulations with the device. The experience of numerous participants in the topic who did not do this, as well as their subsequent torment with IMEI recovery suggests that TWRP backup solves the vast majority of any problems, including turning the device and damage IMEI. It is often impossible even for the radical method of flashing to restore IMEI - with the help of the program Research Download - and your own TWRP backup can ALWAYS do it. Do not put yourself at risk, going to the service center, to waste and nerves - do not be lazy, and immediately after reading these lines make a full TWRP backup immediately ! How to do this - look here in this detailed post: Lenovo A1000 - Firmwares (Post nemo-nemo # 57420760)

Differences A1000 from A1000m
The main, that is, significant, differences in the apparatus consist of two things:

HaveA1000 : RAM 1 GB , internal - 8 GB
HaveA1000 m : RAM 512 MB , internal - 4 GB

HaveA1000 loader NOT blocked by
HaveA1000m loader blocked by

Other characteristicsA1000m can be viewed on the Internet.

Update your phone with ROOT rights


Drivers and Utilities
USB Driver - install in any case. Another link, if the previous problem: - Alcatel OneTouch Pixi First - Firmwares (Fast nemo-nemo # 50204588)
ADB Driver- it is installed only on the working, switched on device with debugging set via USB.

Who will have problems with the above drivers (it sometimes happens), you can take these -Alcatel OneTouch Pixi First - Firmwares (Fast nemo-nemo # 50204588)

Program Download Research Download driver - versions 2.10.1001 and 4.0.0001

Firmware
How to flash the “old” firmware on the new revision device
Who after the firmware "old" (before 30666 ) firmware there is a white \ striped \ strange screen, we read this - Lenovo A1000 - Firmware (Post tocaunt # 45775296) - and then this: Lenovo A1000 - Firmwares (Post nemo-nemo # 60718911)

Official firmware A1000

To date, to recover the device available, there are three firmware: a clean sink 30666, and two by me (curator) of the official 30666:

1) Official stock firmware 30666 as .ras file : https://cloud.mail.ru/public/55xf/5HNd13EwE

2) Stock firmware 30666 as .zip -arhiva to flash through TVRP : Lenovo A1000 - Firmware (Post nemo-nemo # 57223503)

3) Modified firmware 30666 as .ras -file for the program Research Download With integrated TVRP and other minor changes: Lenovo A1000 - Firmware (Post nemo-nemo # 56898589)

If you keep any stock firmware in the form of.ras -file, and you are willing to share them, according to a personal supervisor.
Modifications of stock firmware
Custom firmware


Instructions
How to flash the “old” firmware on the new revision device so that there are no color bars on the screen
Be sure to read the owners of devices produced not earlier than the autumn-winter of 2016 and later: Lenovo A1000 - Firmwares (Post nemo-nemo # 60718911)

If the old firmware (up to 30666), or any of the “old” TVRPs are flashed onto the “new” device, there will be color bars on the screen. Therefore, we read and do.

Instructions for firmware via PC
General view of the firmware manual:
  • Disable antivirus and driver digital signature verification. Connect the USB cable only to the motherboard - that is, behind the PC, preferably to USB2 .0
  • Install all drivers from the header
  • Run as program administratorResearchDownload.exe (it can be downloaded in the header, section "Drivers and Utilities")
  • Click the settings button ("gear") and select the firmware file (view name A1000_USR_S29576_1510212227_SPRD7731_ROW.pac) - from here:Lenovo A1000 - Firmware (Post tocaunt # 45775296)
  • After unpacking the firmware, you will see the name of the firmware to the right of the buttons.
  • Click the "start" button ("Play" button, triangle) to start downloading the firmware
  • If a warning box about something pops up - click "Yes", "Yes", "OK", within the meaning
  • Turn off the smartphone, remove and insert the battery, hold down the Volume_Up button, and while holding it, connect the USB cable to the smartphone
  • As soon as the blue stripes run in the window (that is, the firmware starts), release the volume button
  • At the end of the process you will see the messagePassed or Success
  • Be sure to press the "stop" button (square) in order to close the program
  • Remove the cord from the smartphone, remove and insert the battery, turn on the smartphone
Detailed instructions for firmware (raskirpichivaniyu) via PC

Driver installation
  • Downloaddriver
  • Unzip the folder without spaces and national letters in the path to the unpacked files
  • Depending on the bitness of your OS, run as administrator 32install.exe or 64install.exe
  • Restart computer

UNIVERSAL instruction for splicing the device
Unconditional entrance tofastboot(with the system flown and recovery)
Two errors of the Research Download program and methods of their elimination- in addition to the instructions for splitting
Methods for installing TWRP recovery without first obtaining root-rights
TWRP recovery installation method with root-rights
Creating a FULL TWRP Backup and Restoring It
Information about IMEI, instructions for its restoration, about the importance of the FULL TWRP backup
Instruction-2 for the restoration of IMEI, the general post (not yet verified, but who has nothing to lose .....) ---- Direct link to the user manual
Disable logging (deletes a non-fading and swollen folder / external_sd / slog)
Overclocking the processor and setting the performance mode forever
Another instruction for overclocking and automatic control of processor frequencies
Rollback to stock firmware from Lenovo A1000m firmware
The problem of "color and striped" screen after installing old firmware on devices recently purchasedStill:General conclusion
Spreadtrum sc7731 internal memory markup
How to register your IMEI on Android 6.0 firmware
Solving the problem of "blinking screen" when the display module replacement

Modifications and patches
Recovery
TWRP 3.2.2
TWRP 3.2.2 underOptistock 5.1
TWRP 3.2.1

Universal TWRP - suitable for devices of all revisions
Old TWRP - for devices with the first revision

These TVRPs are generally better not to flash if you are not sure that your device was manufactured in the first half of 2016 or earlier! If you are sure or know for sure - you can flash.

Stock Recovery and TWRP 2.8.7.0
TWRP 2.8.7.0 with Lollipop Theme
TWRP 3.0.2.0 - with MTP function
TWRP 3.0.3.0 with support for the official TWRP App - pre-release version, there is a bug with reboot recovery
TWRP 3.0.3.0 - from source, seamless, with additional options- recommended for TWRP installation
TWRP 3.1.0-0- c "proprietary" inscription "Lenovo A1000", recommended for installing TWRP

Reset to factory (wipe data) on the Chinese recovery

How to enter Recovery
Instructions for any recovery
1) Turn off the phone
2) Press the buttons simultaneouslyON + GRMK_VNIZ
3) Almost immediately after that, that is, literally in a second, without releasing the previous two, hold down the third button -GRMK_UPPERH
4) Keep all three buttons until the stock recovery appears, or until the TWRP logo appears (if the recovery is TWRP)
5) release the buttons

Instructions for TWRP
1) Turn off the phone
2) Press the buttons simultaneouslyON + GRMK_VNIZ wait for the beginning and end of a rather long vibration
3) At the end of the vibration, release the buttons and wait for TWRP to enter


Root
Get root through Custom Recovery + TWRP + Cyanogen-Recovery
Instructions for obtaining root rights, custom recovery and flashing the phone without a PC
InstallationSuperSU (getting root-rights) via TWRP
Another way
Magisk SU (SuperSU Alternative) NEW

The method of obtaining ROOT by the recovery itself TWRP 3.0.2.0
For those who have flashed (or will be stitching)pac file with firmware 30318 or 30666 (built into them TWRP 3.0.2.0 ), as well as for those who installed (or will install) zip firmwares 30318 or 30666 via TWRP 3.0.2.0 . The fact is that TWRP 3.0.2.0 has the property that itself is able to install (and kindly offers to install) the program SU-Installer , which, in turn, can automatically install root-rights itself! Details here: Lenovo A1000 - Firmwares (Post nemo-nemo # 56778380) (paragraph 4 )


miscellanea


Topics Curator - nemo-nemo

Post has been editednemo-nemo - 14.09.20, 19:03
Reason for editing: References to operating firmware-based flow 30666



Rep: (1)
* LoLrD, What better place franca of data optistok?

Post has been editedolegempty1996 - 29.03.16, 11:28



Rep: (348)
olegempty1996 @ 29.03.2016, 14:10*
LoLrD, What better place franca of data optistok?

micro franca standards, Google Apps can rest himself spool;)



Rep: (100)
I start lickingOptiStokfor themselves.
Patch 1 (system)
Requirements for the firmware : 30100 core (OptiStok, BetterStok)
Description : Minor fix scripts and patched several system files that are not in the log gadili much and did not take away the CPU time. For example, when the screen is turned off, the system writes to the log, the screen brightness is 255, then 200, and brightness as Further, hundreds of messages per second. These logs are not needed, and find errors on the contrary interfere. Improvements of the patch is not visually see.
Attached fileminifix1.zip(242.22 KB)


Patch 2 (dialer)
Requirements for the firmware : Core 30100
Description : Slightly increased font size and circle dialer, the old patch and later rewrite, but so far tyts
stock that patched, no, che Palau.

Patch 3 (visualization v2)
Requirements for the firmware : OptiStok (long version apparently 1)
Description : Back pictures (cleaned by mistake apparently) charging the battery off the phone images and alarm if the phone is switched off. Fixed 1 bug services system of creators.
because edited SystemUI added indicators waffles and a network of better stok (v2 fixed icons). Also, some services also drowned from logging into the system.
I returned to the oem radio settings for Russia and Ukraine.
Attached filejavafix1v2.zip(4.38 MB)


patch 4 (power button)
Requirements for the firmware : OptiStok
Description : The patch is not for everyone, that is, If you do not see problems like mine, it is not worth it to put.
in general, sometimes, when you press the switch the phone, it does not wake up. He picked his phone, turned out to be what is happening so. We press the button, the phone receives a message "Insert" and then in the hundredth of a second comes another depression, so he lashes. Most likely this is a bug button, and therefore not at all.
My patch prevents pressing the power button twice for 1/4 of a second. The patch system service rules are not really long after the first load. those. do not rush, Optimize phone.
Attached filepwrbtnfix.zip(128.4 KB)


subsequent patches will go with a long interval. I think the same dialer take a week or two, and on Java podnataskal therein is necessary.

Post has been editedNShut - 31.03.16, 13:54



Rep: (100)
I realized when not working in our Service. Now I try to catch the logs to correct. In general, notice that the screen of the power button is not always included ?, but when a time alarm can not wake up the phone. As soon as you press the power, he immediately yells. In general, as the catch logs hope to defeat the problem. And that is one thing to work on sleep and the other plane



Rep: (683)
NShut @ 29.03.2016, 13:31*
In general, notice that the screen of the power button is not always included?

there is, after went out, and if the right click on the button nothing happens, only the second time is included. At this point, when the button does not work, I have, if you touch the screen for 2/3 seconds, it starts to work. About the same time, the button does not respond. If you just wait for 3s. after the screen went out when the button the first time will include the screen. Such behavior is disabled in lokskrine settings, do not use them and I will not say the same with him or not.
Regarding the alarm, I did not notice the problems at home, as well as stock runs third-party use.

Post has been editedCoderua83 - 29.03.16, 15:11



Rep: (1)
* NShut, What else is going to Fix?



Rep: (100)
olegempty1996 @ 29.03.2016, 19:41*
NShut, What else is going to Fix?

plans to eliminate the glitch alarm. then the reaction of the power button.
then the dealer and pressing the ears. I can not, I do not know, but I want to

Posted on 29/03/2016, 19:16:

NShut @ 29.03.2016, 22:14*
Hello everybody! Make S30122 update of a custom rekaveri.

I see no reason, there is no positive feedback. I'm not going to personally improve and catch new bugs on obum. even if there was a list that corrected



Rep: (18)
How to flash trvp rekaveri with cyanogen?



Rep: (683)
On top Cyanogen twrp flash according to the instructions of the cap.



Rep: (18)
I'm here just to focus not see whether there is a cap trvp



Rep: (683)
*Instructions
* Get the root through the Custom Recovery

Post has been editedCoderua83 - 29.03.16, 19:41



Rep: (683)
LoLrD @ 28.03.2016, 19:51*
OptiStock - on the basis of S30100

Thank you very much this is vesch)

NShut @ 29.03.2016, 13:23*
I start lickingOptiStokfor themselves.
Patch 1 (system)
Requirements for the firmware : 30100 core (OptiStok, BetterStok)
Description : Minor fix scripts and patched several system files that are not in the log gadili much and did not take away the CPU time. For example, when the screen is turned off, the system writes to the log, the screen brightness is 255, then 200, and brightness as Further, hundreds of messages per second. These logs are not needed, and find errors on the contrary interfere. Improvements of the patch is not visually see.
[Attachment = "7839310: minifix1.zip"]


Patch 3 (visualization)
Requirements for the firmware : OptiStok (long version apparently 1)
Description : Back pictures (cleaned by mistake apparently) charging the battery off the phone images and alarm if the phone is switched off. Fixed 1 bug services system of creators.
because edited SystemUI added indicators waffles and a network of better stok. Also, some services also drowned from logging into the system.
I returned to the oem radio settings for Russia and Ukraine.
[Attachment = "7839312: javafix1.zip"]

and went on to break ... :)

Thank!
but you can patch the system separately and purely graphical icons there and others separately. In the third patch network icon is displayed if there is no sink. Not even in this case, a network icon from AOSP not accurately show the level of network- overstated. When the drain on the one division two AOSP etc

Post has been editedCoderua83 - 29.03.16, 20:29



Rep: (100)
Coderua83 @ 29.03.2016, 23:18*
but you can patch the system separately and purely graphical icons there, and other separately

in sistemUI, I will not delve into again. in the next patch I will put two versions. for icons has no desire to mess around. it simply if you want to copy Photo / system / priv-app / SystemUI and will all icons stock.
It's just that I do aim to fix bugs, then to beauty, and not staring me in these icons. I even sink battery.
Better yet, who knows how to work with APG, make the correct icon, then sub-menu, I personally always with Transparent kosyachit

Post has been editedNShut - 29.03.16, 20:42



Rep: (683)
NShut , Clear, SystemUI already racked, doing backup. With png I can work my schedule is. It will be necessary to compare stock and AOSP look whether there is a discrepancy between the animation or not. I once saw long ago, it is in fact not critical but if there is an opportunity to improve to do.

Post has been editedCoderua83 - 29.03.16, 20:53



Rep: (348)
Coderua83 @ 29.03.2016, 23:50*
NShut, clear, SystemUI already racked, doing backup. With png I can work my schedule is. It will be necessary to compare stock and AOSP look whether there is a discrepancy between the animation or not. I once saw long ago, it is in fact not critical but if there is an opportunity to improve to do.

the problem is that Lenovo 5 bar and AOSP 4. Therefore, some division had to make 2 times :(



Rep: (683)
LoLrD @ 29.03.2016, 20:01*
...
the problem is that Lenovo 5 bar and AOSP 4. Therefore, some division had to make 2 times :(

on that's it, then schedule it is not necessary to dig?



Rep: (100)
Coderua83 @ 30.03.2016, 00:08*
on that's it, then schedule it is not necessary to dig?

No, on the contrary, two odinkakovyh edit the file and will lyapota



Rep: (348)
NShut @ 30.03.2016, 00:19*
No, on the contrary, two odinkakovyh edit the file and will lyapota

By the way, you're right, if anyone has knowledge of Photoshop can fix it: blush:



Rep: (683)
Aha, well there icons numbered 1,2 same. It is possible to align all and would like to show the drain.
But no, in the course of the animation are all different, with smaller to larger. Just such a move, it can be converted easily. I just look at each picture against a grid in the editor and see everything.

Corrected bit icons AOSP now turn animation like the drain.
Attached filedrawable-hdpi-v4.rar(1.33 KB)


Post has been editedCoderua83 - 29.03.16, 23:10



Rep: (22)
Little instruction on obtaining Ruth rights of a custom rekaveri and flashing your phone without a PC.
Getting Root Rights
1. Turn on the installation of apps from unknown sources.
2. Turn on the Internet.
3. Download and installKingroot
4. Open KingRoot and click the "Try".
5. Get Root (wait 100%)
(If it doesn't work out, you can try it several times. Try to clear the data from KingRoot when you try again.)
6. Reboot your phone.
7. PutSuper-sume
8. Start the first stage.
9. Start the second stage - the progress bar freezes on some initial interest and the application hangs (a long time).
10. Making cancellation (backward button) and overload device.
11. Go to KingRoot and re rutiruem device.
12. Launch Super-Sume, see the invitation to the second phase, and click the button - everything passes through.
13. KingRoot removed, SuperSU installed.
14. Now Super-Sume can be removed from the device.


After receiving Ruth right to begin rekaveri replacement.
Set custom rekaveri
1. In Developer settings include debugging via USB.
2. Download and installRashr-Flash tools
3. Starting on the phone Rashr-Flash tools, acknowledge receipt of the rights of Root access to it, agree with the proposal to make a backup set (of a custom or stock) rekaveri. If you do not offer (offered me) - swipe from right to left from the edge of the screen and in the menu that opens, select the item backup.
4. Load filerecovery.img (TWRP), Unpack and move it to an external SD card.
5. Enter the Rashr-Flash tools application.
6. Select the item Flash Recovery.
7. We are looking for on the SD card file recovery.img (in the archive - twrp_v4, if you do not find - rename to recovery), confirm and restart the phone.
8. When downloading pop up window Rashr-Flash tools.
9. Select I know the risk.
10. Restart the phone.

Now the phone has SuperSu and TWRP (can also be used instead of TWRP tsianogenovskoe rekaveri - it is in the header)

We put custom firmware
1. From hats download the firmware of interest and throw it on the stick.
2. Reboot your phone into rekaveri mode (Turn off the phone. Hold the volume- button and the power button after 2-3 seconds without releasing the power button and the volume- button, hold button Volume +)
3. After loading rekaveri go to Instal and looking at a map file with the firmware.
4. When the EEPROM push Wipe Dalvik-cache.
5. Then select Reboot system.
6. Enjoy the custom firmware.
* Optionally, the 2 paragraph can further add the files with the patch after flash select (throw them in advance on a memory card).


P.S. 30122 checks for the official firmware. Most of the information found on this website.

Post has been editedsnekt @ - 30.03.16, 10:27
Reason for editing: Raised in the topic header.


Full version    

Help     rules

Time is now: 10/08/20, 3:16