Power fix patch
About the patch
Are you familiar with the picture in which in the statistics of the battery at 1 place is Communication with the network?It is not right!!! But the patch that sets the correct value of the battery capacity and power consumption of individual components.
The patch sets the correct value of the battery capacity and power consumption of the individual components for the MT processor and batteries 6735R6250 Mah.
Patch set the correct battery capacity values ​​in6250 Mah.and consumption parameters with individual components for a more adequate prediction of the battery consumption. The firmware producing official people, as usual, did not take care of it and put a typical file for all Chinese phones with zero values ​​and battery capacity 1000 Mah
Due to incorrect indication of consumption by applications, it turns out that charge sticking and unexplained charge jumps can occur on a graph (when a charge jumps during a reboot - this is normally the first few cycles)
Due to the wrong indication of the battery capacity and the parameters of your processor, in the flow chart (configuration-battery), all you see-untrue (gently say) and you can not determine whether so much% charge, and how much each component (Wi-Fi and T d) Consisuring a charge .... But if you without a difference which application \ iron how much I consume% of the charge (written under the schedule setting - battery), sticking the% battery in one place, do not put it ... After applying the patch, starting with 2-3 Cycles The charge \ discharge% charge% charge minimize, and consumption by individual components (battery settings, under the schedule) becomes real ...
Flash through custom recovery! The patch is universal, for any firmware. After installing the patch from TWRP, do wipe cache and dalvik cache. You can check the capacity in your firmware by the application.
CPU-Z v 1.12 (!!!)Display of battery capacity Enable in the settings, other versions do not have this item at the request of manufacturers! : D
The patch is suitable for HT6 and DooGee T6, as the battery capacity, processor, screen-all the same. Download:....Power_Fix_patch_DOOGEE_T6_HOMTOM HT6_UNERIVER.Zip.(1.7 MB)
Correction of read / write error on an SD card.
Description
The platform.xml file defines the access rights to various Androd objects, in particular, internal and external memory cards. The file is located on the path /system/etc/permissions/platform.xml. Owner root, access rights 0644 (the letter "G"). Attention! When manually replacing the file, be sure to set the correct permissions, otherwise you will get perpetual download
Modified Platform.xml corrects an error of access to an internal memory card when installed external. And corrects the entry error \ read on the SD card, this error occurs in all firmware, including R17. It can lead to a situation in the impossibility of installing new programs and data, although the built-in memory card is not filled.
If after the modification something went wrong, then restore the source file using the archive:Platform_Original
This archive contains the source version of the file without any modifications. Suitable for all firmware, including the last R17
Download:....Platform_Update.zip(126.5 KB)
Set via TWRP.
ReturnPlatform_Original.zip(126.5 KB)
Post has been editedMannur - 21.06.16, 20:23Reason for editing: Raised to cap