HomTom HT6 - Firmware
under the messages to which you want to add links. Lewantos @ 01/18/2016, 19:13
Without lyrical deviations, I will say that I lost the brightness slider in the curtain. Which was completely accurate in R12 and I do not remember whether in R13.
If it is turned on, it will not be on it.
[email protected], 21:44
FT v5.1504.00.000 - for Windows
The current version of the flasher
SP_Flash_Tool_exe_Windows_v5.1548.00.000.zip(43.3 MB)Post has been editedkalipso888 - 09.04.16, 17:54
Instructions for porting the config on the GT9xxx chip
GT9xx 驱动 移植 说 说 _For_android_2014011401.pdf(2.64 MB)
GT9xx 驱动 移植 说 说 _For_android_2014011401.pdf(2.64 MB)Someone on R14 did not earn an opportunity to send bug reporters to developers? Settings - About Phone - Wireless Update - Three Points - Feedback.
Windes @ 01/19/2016, 15:41
Someone on R14 did not earn the case sending bug reports
Does not work on R14. Writes a connection failure.
Hello!
They sent this miracle from China ... and there is a problem. After several times, unlocking the screen, it (screen) disappears and barely highlighted. Long pressing the switch key is cut down, and then turn on. A couple of times it was so during a conversation ... It is impossible to put the phone ... What could be? Reset to factory settings, did not help ...
They sent this miracle from China ... and there is a problem. After several times, unlocking the screen, it (screen) disappears and barely highlighted. Long pressing the switch key is cut down, and then turn on. A couple of times it was so during a conversation ... It is impossible to put the phone ... What could be? Reset to factory settings, did not help ...
VNSERG @ 01/21/2016, 14:54
Reset to factory settings, did not help ...
Refreamed. In the firmware cap eating (I personally advise R9). And look there.
Avructure is disabled ... reflash and 9 and 12 and updated ... with tests, always buggy ... can the approximation sensor? Or iron itself ...
Selling back, if there is still an opportunity. I also had such a glitch. The seller took marriage without problems. Promised to replace with others.
Jog1 @ 01/21/2016, 18:52
You enter in the settings in the battery, at the top of the right three points click, the save mode is chewing there in the setup there is a choice when it turns on 5%, 15% choose.
Post has been editedkalipso888 - 22.01.16, 00:19
Jog1 @ 01/21/2016, 19:52
To limit yourself in functions when the charge is 15% and less, let it be 5%, all the same, our body for 15% can still live for a very long time, and the same flash is no longer blinking ...
This is another firm analogue with this problem. There are no problems with 15%. I have never to include energy saving mode. The flashlight works even at 3%.
Post has been editedkalipso888 - 22.01.16, 00:19
Jog1 @ 01/21/2016, 20:52
Here, it is interesting, simply, is there any craftsmen, "intuazists", capable of finishing the firmware? Many things are not necessary.
Porting firmware.
Development of kernels and firmwarefor devices on the MTK platform
Yes please.Port the core.
Here is another example.Try and find out how many of us.
Videohttps://www.youtube.com/watch?v=nTRX0gnxdcE
Another instructionBy porting.
Post has been editedkalipso888 - 22.01.16, 00:26
Megageorik @ 01/21/2016, 23:08
It is worth not to include
Strange, and I stood "never include", but 15% stopped working out the flash ... Now I put 5%, I will look at it ... True, it is necessary to wait for 3 days, only with charging today
Post has been editedkalipso888 - 23.01.16, 17:33
©savagemessiahzine.com2005-2021 All rights reserved.
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement
savagemessiahzine.com®- registered trademark.
Terms of Use | Denial of responsibility | Advertising placement