Perezalil firmware on Yandex disk
Caynogen Mod 12.1 Unofficial https://yadi.sk/d/efSrRMzImPC87Turn off our smart, hold the volume + button and the power button.
there are three points.
choose the first upper Recovery, confirm selection by pressing the volume -
Go to custom rekoveri TWRP 2.8.7.0
I install the firmware through
custom rekoveri TWRP 2.8.7.0 HOMTOM HT6 - Official firmware (Post kalipso888 # 45280806)Do wipes are strongly recommended ,
another 90% of cases will be glitches or from the old firmware or firmware is not compatible! It is important!
Wipe the selected item with your finger poke in the inscription.
This window will appear.
at the bottom of the strip with a circle Swipe to Factory Reset touch the red circle and keep it in pravo.proizoydet reset and clear memory.
If you have long thought the screen is locked and you need to spend on an inscription on the screen Swipe right to Unlock
Features unlock with swipe
When leaving the sleeping mode with a running TWRP, TWRP is blocked that in itself normally and conceived by developers. For unlocking it is proposed to make a "swipe" to the right on the screen (eng. Swipe - do not pull out) - "Swipe Right to Unlock". However, it does not work with the usual way and many are faced with the problem of the inability to unlock. It turns out that "swipe" needs to be done in a special way: the tap first the left side of the screen, then slowly, without taking off the finger, stretching to the right, through the entire screen. You can learn about the work of the swipe on the inscription "Swipe right to unlock" with the lock icon: when the action works - the inscription and the lock begin to "shade" from left to right. "
In order not to snoop on the screen at random, in the main menu, through the icon "palette", check the last but one line "Use alternative lock screen", this will help to overcome this problem ...
Also, I draw your attention that in the settings there is an opportunity to increase or completely disable the idle time for falling asleep.
(Swipe right to unlock) Very irritable button triggers a 10-second times.
after completion of the write Done.
To throw off the microSD card firmware
https://yadi.sk/d/efSrRMzImPC87and fixed cameras
OUKITEL + K6000_CM12.1_fix_camera20151218.zip(5.85 MB)
USB flash drive is already in the tray and the tray in SMART.
You can press the triangle and go back to TWRP and select Install
Choosing our stick
external storage (External storage) and the firmware file on it.
When the firmware will be installed this window
Left button is gray Wipe cache, and reboot the system right.
Update and that's what happened.
https://yadi.sk/i/3d8y4_cqmPMDGOf the minuses the camera does not work and there is no network.
Post has been editedkalipso888 - 22.12.15, 13:48