And where to get rekaveri for Gigabyte gsmart roma rx?

Posted on 09/30/2015, 22:47:

And it can make a full step by step instructions how to port the firmware 5.1 for all MT6582 sitehttp: //www.mtkroms.com...llipop-on-all-mtk.htmlon Gigabyte gsmart roma rx

How to flash the phone (off.)

1. Download the official firmware Yandex.Disk
2. We throw GBC_update.zip file on the SD card
3. Turn off the phone
4. At the same time we press the vol- (button "decrease volume") and the power button
5. We are waiting for the download rekaveri (android logo appears)
6. Use the volume buttons and the power button, select "wipe data / factory reset" and "Yes, delete all data"
After which all the files on your phone will be deleted. to back up
7. When we choose "install zip"
8. is on the SD card, the downloaded file with the firmware: GBC_update.zip and select it
9. We are waiting for the download to finish.
10. After the download is complete, we will throw in rekaveri menu. Choose "Reboot now"
IMPORTANT
In no case can not remove the battery loading time. It should reach the end! Just before the firmware is necessary, which would be more than 50 percent charge

Off. firmware:https://yadi.sk/d/cMLBOkw6jSGgc

And where to get driver mtk droid tools, and in general the driver to connect to a PC when flashing. Firewood MTKUsbAll0.8 not see mtk droid tools

andrii_972014,
Fast

nepomogaet phone must be turn on or off ?? But it does not work so well either

andrii_972014,
Try to ask a question

I flashed CM 12.1 in the Roma RX but no radio. Where can I get it ?? Or a flash?

Describe precisely the problem. And what kind of firmware over, give the link.

From the websitehttp: //forum.xda-devel...wiko-darkmoon-t3145011
changed its stock core firmware to run, but there is no radio and bear, trying to recover through MTK droid tools, will not be restored to stitch your modem too personal. Help ported to Gigabyte Gsmart Roma RX, and if not difficult to put the firmware on a forum.

No opischite you exactly what to do! The kernel is not boot.img and cernel. Need rszbiryat own bottles and the very firmware iismotrettchto kak.u and I have neither the time nor the opportunity for it all ...

Did according to the instructions:
kernel of the runoff in the port,
fstab
fstab.fat.nand
fstab.nand
init.project.rc
init.no_ssd.rc this file may be called in the ported kernel init.ssd.rc
init.usb.rc
Photo of the port
No more files did not change, sometimes putting in your modem

And the firmware is started, there is no radio communication and can not be restored by any ADB or through MTK droid tools. And can not understand your modem is inserted into the stitching, or the one that already exists in the firmware ?? that would have earned net

Post has been editedandrii_972014 - 13.10.15, 23:12

Try to put your own if you do not help then leave your custom kernel (boot.img).

Good afternoon, prompt

Glass front panel can be replaced to? Where to order? how much will cost
Has anyone seen him under the covers, all, or any other apparatus suitable for some, desirable examples

Case fits all 5 smart. "The glass should ask of-the dealer. In garantiyke have office locations.

Does anyone have the custom firmware on this phone?

Firmware to that nedotelefonu no. One official and even that buggy.

There Firmware Fix where the radio (that worked without headphones). Probyval who put? I have a zip file with fixed but MTK 6575 on the tablet Lenovo stood standards. Later, I lay.

Good day to you, if anyone has the firmware for FlashTool?

Hello somebody can make custom on this device and the native Prosha terribly buggy