Flasher_23,
By the way speaking, should you clear the cap in the discussions about modifications of the smart manipulation? If they are right there

Posted 02/04/2015 01:08:

Flasher_23,
It was like this that I installed the S322 with the chexum ini removed and the twrp rekoveri sewn in, the update came when the smart was first turned on and everything was successfully done.
Hmm, the campaign will have to fill in faq

I’ll tell you a little bit about the fact that once again you’re trying to break your nerves and don’t get a brick, and also that if you receive it, there’s nothing to worry about.

- If you are too lazy to backup, or you don’t know how to restore backup and you don’t have time to go into it all - you want to flash it right away and don’t suffer about anything - then follow simple rules:

1) Install root via PC using the program VROOT
2) Install custom TWRP from your phone using Mobileuncle MTK Tools
3) Before flashing the ported, custom firmware, look at the reviews on it, a description of the porter, instructions on the firmware from the firmware author.
4) Use the battery charge at the firmware in TWRP not lower than 50% in order to avoid a sudden shutdown of the device and a failure in the firmware.
5) Do not remove or prevent accidental disconnection of the battery when flashing to TWRP. (By the way, the drain from the PC using the SP Flash Tool is stitched with an extended battery)
6) When flashing, do not forget to do all the wipes. Wipe, and to be exact "Wipe" is nothing more than formatting specific sections you specified in the internal memory of the smartphone, it is advisable to do all the wipes when flashing (except for a memory card naturally)
7) Do not cheat with the system systemUI and framework - after manipulating with them in the desire to modify the curtain or nav bar, status bar - the phone can become rich.
8) In general, do not shaman with system files, change the font with extreme caution and only from reliable sources, this also applies to everything else that implies installation via TWRP.

If you still got a brick, do not be discouraged, do not run to the service center, it is easily restored - maximum 30 minutes, see the instructions in the header.

Post has been editedjimbohopckins - 04.02.15, 08:08

Font Helvetica Neue - Apple Font ..
Maybe someone will like it.
flash through custom TWRP rekoveri
The font is completely working and archive, including, checked personally.
TWRP_NelveticaNeue-L.zip(1.48 MB)





Post has been editedandrej12333 - 25.07.16, 01:21

Mrj1993 Recovered IMEI in the following way:
Downloadingrestore_imei.zip(16.84 KB)

We edit the run.bat file with a notepad (or to your taste with something else) by entering your IMEI numbers instead of the “356087045XXXXXXX 356087045XXXXXXX” written in it (we are looking for our own IMEI on the box from the phone, or under the battery in the phone)
Save, run, must create a file MP0B_001.
It is transferred to the phone and using a file manager likeВ® Root Explorer (File Manager)move this file to / data / nvram / md / NVRAM / NVD_IMEI / MP0B_001 or / nvram / md / NVRAM / NVD_IMEI / MP0B_001 (depending on the device)
Reboot the device.

G @ M3R, If you do not want to turn off Wi-Fi when the screen is turned off, then this option is best set to "enabled". A parameter is enabled when charging does not turn off Wi-Fi only when the phone is charging. It is better to remove the intellectual mode (by the way, by default), otherwise either mobile traffic will be used or you will not receive messages in the Internet instant messengers and so on.


Post has been editedandrej12333 - 25.07.16, 01:08

Khamit1986 This is not a panacea, after the firmware / hard rezet flies again. Yes, and nvram err in Wi-Fi it does not cure. So only backup via mtkdroidtools. Or any backup of your nravm (for example from tvrp). Look at Flasher_23 as he restored ask.

Please tell me why when you connect the headset via bluetooth and press the "accept call" button on the headset itself, the connection crashes and writes an error: Unfortunately, the application "Bluetooth transmission was closed"

When you press a button when an incoming call is received, it is impossible to dial the last dialed subscriber using the headset!

Post has been editedthe_lond0n - 04.02.15, 14:02

resurrected
When there is no backup, and Sims do not work, then the option is quite

Post has been editedkhamit1986 - 04.02.15, 14:33

the_lond0n,
It would not be bad to indicate on what firmware the indicated jamb, I personally did not have to use the BT headset at all and I don’t have it on my hands, unfortunately, but again - you need to specify the firmware

Post has been editedjimbohopckins - 04.02.15, 18:35

Information for those who want to upgrade to version 326 of. firmware but does not work. (suitable only for those who have 322)

To put it bluntly, the point is that if you get an error in the update, then you did some manipulations with it, namely, rutting, deleting system applications, and even to the extent that you changed the launcher - to understand why you have a mistake updating is not always possible, but you can solve this problem. I will not describe ways how to update to a rotated device with half the system software removed - there is no such way and I think it will not.

1) I will tell you how it all worked out - I patched the phone to the firmware version S322 ... with TWRP stitched in and when I first turned on, I immediately turned on the Wi-Fi and entered Google account, I don’t know exactly when the update came, but according to my memory It was instantly on the first power up - with the Internet on the PC, it was turned on, and access to Wi-Fi was available, the phone was not ruled, clean stock firmware, as soon as the store, I think the method is not complicated, is it? I personally succeeded.

2) But of course, not everyone has access to Wai Fayu and sometimes even to the normal Internet. The fact is that the firmware you still need to be not rooted and without removing the system applications, but with the TWRP stitched into it (the firmware is in the header). I do not welcome this way of updating because the update itself is meaningless, and the method does not work for everyone, the result of the collapse can be different and unpredictable, all actions with your device you doat one's own risk , and the instruction is as follows:

1. Download and put in the root of the sdcard files
update_fix.zip(628.08 KB)
update.zip(26.47 MB)

2. Reboot to TWRP, first flash update_fix, then update
3. Reboot your phone and you should have an updated S326.

Post has been editedjimbohopckins - 06.03.15, 21:09

I pulled the boot animation from miui5 v4 and successfully installed it in miui6 v5. Everything is working.

jimbohopckins
Flasher_23,
Guys have a suggestion, can put in a wsw hat for miui and xposed for a bucket, so that people know what is it?

djonkor
I can throw off the shoanimation that I sewed in on myself - mb will like it, if yes - then I will throw it later ..

dimikos
I can’t give instructions and links as there is a separate topic for this, except to write in faq in brief what it is and why
And if someone asks, I will explain

ZY If you link, then there is a chance that someone will do something with his device and then rake it all up, if the user is sufficiently informed in such, then he will be able to find wsm with the exhibition and figure out what is where and how, wsm is harmless and the expert can be dangerous
Someone will be too lazy to read the instructions and make a mistake then again I repeat - then here it is to rake
And in faq I will write about it as I will come from a computer

Post has been editedjimbohopckins - 04.02.15, 23:35

jimbohopckins
Well, even so, just wanted to bring the idea

jimbohopckins
I will be glad.

djonkor
Here you are
I do not remember where I took it, I like it, but it has nothing to do with the miui, there is cosmic destruction of the planets: D
but I do not know whether it is possible to put shoanimation in Miui 6 and whether it is there at all, since I am sitting on the fifth
shutanimation.zip(21.99 MB)


Post has been editedjimbohopckins - 05.02.15, 00:53

1) InstallTWRP 2.8.1.0 Materialized Play.
2) Turn off the phone.
3) Turn on the phone in TWRP recovery mode (how to do this? See F.A.Q.)
4) Select the item (line) "Backup" in the top "storage" point, select Micro SD, put a check mark under all sub-items in the point "Partitions"
5) At the bottom of the inscription "Swipe to Backup", move the circle spipe to the right and create the backup, wait, turn off the smartphone at the end. Turn on normally, go to the memory card - there you will have the firmware backup in the TWRP / backup folder.
6) Restoring backup can be done in the "Restore".


Post has been editedandrej12333 - 25.07.16, 01:10

1) Get the root (the method in the header is fully working)
2) Download the programFoldermount
3) Download the cache and apk, put the cache where it should be in accordance with the way of its location, install the apk application, do not start the game yet.
4) Start FolderMount, click "application analyzer" in the first paragraph, specify the path to the game cache on the memory card, in the second paragraph you need a previously created dummy cache folder (finding and name the same as on the memory card) select this dummy folder in the second paragraph , confirm the creation and title, fasten the clip.




Post has been editedandrej12333 - 25.07.16, 01:11

Tell me, please. Mui 6 beta. After the smart is restarted, the widgets do not start, and the clock, weather, calendar are not updated in the future. How can I fix it?

Posted 05/02/2015 07:43:

And even after the reboot, they change to the standard wallpaper, lockscreen.