Chuwi V89 - Discussion | [tabletpc] Windows 8.1 | 8.9 "| Intel Z3735F 1.83GHz | 2GB RAM



Rep: (15)
PictureChuwi v89
Description| Discussion пїЅ | Purchase " | Accessories В» | Firmware " | A source of information
Windows 8-8.1 пїЅ | Windows 10 пїЅ | Windows RT and software пїЅ | Games for tablets on Intel Bay Trail пїЅ | Windows 7 пїЅ | Ubuntu linux пїЅ | Change the operating system пїЅ | Search programs пїЅ | Antivirus пїЅ | Ambulance laptop owners пїЅ | IT smoker пїЅ | Operating systems and software

Attached Image

Official site
Specifications:
Model: V89
White colour
Operating system: Windows 8.1
Screen size: 8.9 inches IPS (16: 9 ratio)
Resolution: Full HD 1920 * 1200 (Samsung Retina)
Multitouch: Capacitive 10-touch
Processor: Quad-Core Intel Z3735F 1.83 GHz
RAM: 2Gb DDR3
Graphics: Intel HD Graphics 7th generation
Built-in memory: 32 / 64Gb (eMMC)
Front camera: 2 megapixel
Rear camera: 5 megapixel
Support:
- Wifi: Yes, 802.11 b / g / n
- Built-in 3G: WCDMA - 900 / 2100MHz (2G: GSM - 900 / 1800MHz)
- Bluetooth: 4.0
- GPS
- SD cards: up to 64Gb
- OTG
- G-Sensor
Connectors: 1x Micro USB, 1x Micro SD, 1x Micro SIM, 3.5mm-jack
Battery: 6400mAh
Speakers: Stereo (ACC)
Dimensions: 233.2 * 148.2 * 8 mm (weight 445 g)
Additional Information:
Additional photos
Attached Image
Attached Image
Attached Image
Attached Image

Any utility
- A source of information:http://bbs.chuwi.com/forum.php(but for comfortable use, it is advisable to insert this link into Google search and select “translate page”) just set “v89” to the site search.
P.S: antivirus constantly swears at this site.
- Drivers for Windows 8.1 x86:http://my-files.ru/6j2f39
- BIOS:http://my-files.ru/gjzz4z
- Official build of Windows 8.1 x86 Bing with pre-installed drivers and Office 365:https://yadi.sk/d/3f0W0kgDdrhmx
Detailed instructions for installing Windows 8.1
1. Format the USB flash drive in fat32 or, be sure to rename it to "Winpe" (without quotes).
2. Download and unpack the archive, the contents of the folder "S895_F_3_CHUWI_EN & ZH & HK_NO_WW41_V1.0.7.T" are copied to the USB flash drive.
3. Make sure that the tablet does not have a microSD card, connect the USB flash drive and keyboard to the tablet via a hub (not necessarily with power).
4. Turn on the tablet and press ESC until you get to the choice.
5. In the menu, click "Boot Manager" and select "EFI USB Device (General USB Flash Disk)" - this is our flash drive - press Enter, it will boot from the flash drive.
6. At the end of the installation, the computer should turn itself off, remove the flash drive and turn on the tablet - configuration will go. At some point, you can choose English language.

Recommendation: after formatting the flash drive, open "Control Panel \ Administrative Tools \ Computer Management \ Disk Management" and look for the partition on the flash drive to be marked "Active", if not, make it that way (right mouse button - make it active).


SOLVING THE PROBLEM OF JOINT WORK WiFi and Bluetooth


Making of 5 fingers 10
As it turned out, the drivers for the 5-point multitouch are installed from the factory, and the panel itself works with 10 touches, then this bug can be eliminated at the request of the owner.
Link to the driver for the touchscreen:https://yadi.sk/d/2EnQCbUQdqTiG
Instruction:
- unpack the archive;
- go to the task manager and select: HID devices ->KMDF HID Minidriver for Touch i2c;
- in the driver tab click update ->find drivers on this computer ->and select the folder with the drivers.

When installing drivers, the touchscreen will be temporarily disabled, but at the end of the process everything should work.


Prog for SMS


Turn off sleep mode for Windows (turn on hibernation by default


Enabling full hibernation


Installing Dualboot on the tablet

Instructions with files from sanir76:
Chuwi v89
Archive with full firmware for CHUWI V89 64Gb DualBOOT. Instructions in Russian are present inside:ChuwiV89
Or one more:
Files for firmware:
https://yadi.sk/d/vCnQBrBEfxHDL
Files for 32GB version:
Chuwi v89
Instructions on firmware (the links information is similar, but complements each other):
Chuwi v89
Chuwi v89


Switch from DualOS to SingleOS


option to get Root rights for Android


Running GPS from under Windows (complete instructions with all links
Updated version (fewer problems):Chuwi v89
Initial option:Chuwi v89


Connecting the tablet to the TV (with video, TV - LG


Template of the protective film on the tablet (Luxcase universal film for cutting according to the template)
Chuwi v89
Instruction:Chuwi v89


Solving the problem with the time difference in Win and Android


Repartitioning the size of partitions for Android
By default, 10GB is allocated for android, but you can do more or less
Chuwi v89
For advanced users, there is a batch file for creating a partition.tbl file:
Chuwi v89


Increase productivity in android games


Xposed to Chuwi v89 (Intel x86) works!


Disassembly + photo of the entrails


Simultaneous charging and working with devices (hub scheme)


How to remove Android?


Rolling back the touchscreen drivers to the factory ones, if it doesn't work, or there are phantom clicks (after replacing the touch / update of the Windows drivers)


The tablet does not turn on, it is heated on charging. Short circuit power (successful repair of the power circuit)



Post has been editedMaksim UA - 13.03.19, 17:36
Reason for editing: upd



Rep: (7)
I have disabled the touch in Windows (there are phantom operations and the screen is not extinguished), I use Bluetooth keyboard with a touchpad. Not very convenient, but nothing can not be done.
The Chinese are thumping, waiting for the next week to kick them for the touch. On Ali, there seems to be suitable, but you need to clarify the nuances.
The battery is our size, if you order - I’ll share, take one.
PS: there is a battery, maybe 2 take it? :)https: //www.aliexpress...-8000/32960051168.html

Post has been editedP @ uk - 12.02.19, 12:52



Rep: (15)
P @ uk @ 12.02.19, 01:40*
There is a battery, maybe 2 take it?https: //www.aliexpress...-8000/32960051168.html

Well, without a working motherboard, I don’t need a battery (
But I will hope that someone still has a motherboard.



Rep: (10)
* P @ uk,
* Maksim UA,
On Avito there is a white copy of Chuvik for 7k p.



Rep: (15)
* sabir76,
Expensive, even if for two ravaraholit (



Rep: (7)
Got hands to hold the autopsy chuvika. And what do I see?
Touch with train fpca-89a01-v02
Although this topic photos with ZHG-0035C01
These are the jokes. I think they are interchangeable, but somehow I don’t really want to spend the extra $ 15 and a month or two ...

Attached images
Attached Image



Rep: (15)
* P @ uk ,
I looked now, I have the same FPCA-89-A01-V02.



Rep: (247)
* P @ uk, * Maksim UA,
Do you have any versions with 32 or 64 gig?



Rep: (15)
* andru666,
I have 64GB



Rep: (7)
* andru666, 64



Rep: (10)
* P @ uk,
here they are both black and white

Post has been editedsabir76 - 16.02.19, 01:19
Reason for editing: Upd



Rep: (10)
* Maksim UA,
Maybe you should also try to look for the motherboard by the model number of the board itself?



Rep: (15)
* sabir76,
I already thought, but I did not understand what her number was, what is written on the sticker does not beat.
P @ uk I threw a very interesting version - there is an analogue of kiano intelect 8.9 3g ms, everything seems to be one to one, only there is no dual block, and I xs, is it possible to throw our firmware there without any problems. The board for our device +/- is the same for different devices.
For example, a similar board is on Chuwi Hi8:https: //forum.xda-deve…extra-cooling-t3439041only she has a lot of things that are simply not unsoldered (and in terms of nutrition, excellent elements from those that I have burned down).
It is also similar with different Kiano models:
Intelect 8 3g:https://www.elvikom.pl/obrazki/_f/f_0026738.jpg
Intelect 10 3g:https: //archiwum.alleg....10-3g-i7208999032.html

Post has been editedMaksim UA - 16.02.19, 01:58



Rep: (10)
* Maksim UA,
Turn to the service, they will probably tell you what mother is worth.
Just looked at the Kiano lineup. The clone of our little animal is Kiano Intelect 8.9 3G. Proc is the same, only the memory is smaller.

Post has been editedsabir76 - 16.02.19, 02:26



Rep: (247)
P @ uk @ 02.15.2019, 22:33*
Touch with train fpca-89a01-v02
Although this topic photos with ZHG-0035C01

You have 64 gig that was probably in the 32 gig theme



Rep: (7)
Got a new touchscreen (a huge pasib* Maksim UA ). Connect it - does not work. Easy second panic, then I remember that I'll show it in Windows disabled. I turn - a lot of ghosting. I remember what time it was, after the auto-update WINDOWS driver (were treated back). But I'll wood has not updated ... I stand by 10 strokes with a cap. Fumbled on the topic, I found in the same message, "such as a staff." I tossed them - voila, touch works fine. Reload this idea it was still in android and test the stitch there, but that's the case, if it had not worked.

PS: the touchscreen on the case sits in a stranglehold. I spent 3 hours to otkovyryat ... piece by piece, on the wreckage, by centimeter ...

Attached files

Attached fileKMDF HID Minidriver for Touch I2C Device.zip(72.26 KB)



Rep: (15)
Everything worked for me too.
Prehistory:
He stopped working, the charge does not break, heats up.
Something is shorted on the power supply, it takes 3A from charging and draws down the voltage to 3.5V (or the charge goes to the protection). Problem with 8-foot mikruhoy VT4IB (or VT41B) - is boiled, and like with 5-foot 4W2FC.

In general, everything was done by replacing these two parts:
1) 5-foot 4W2FC, according to datasheet - LPW5206B5F (description - USB Power Loading Switch)
datasheet:http: //www.sunnyqi.com...month_1401/LPW5206.pdf
2) 8-foot VT4IB, on datasheet - SY7088 / SY7088DGC (something like OTG power is connected)
datasheet:http://www.hytic.net/u…SILERGY-SY5800AFAC.pdf
What they put is VT5NC (instead of VT4IB), and 4W2Fs (instead of 4W2FC), such as these identifiers do not play a big role, and numbers and letters can differ, the main thing is that datasheets match.
It is possible to replace the second part and it will not be necessary if you don’t burn it yourself, like me: blush: by throwing a more or less charged battery to the board. But it is not exactly.
I express my deep gratitude to a kind person from another forum who soldered all this to me for thanks, chocolates and 10 minutes).

Now everything works, discharges, and ..., and even charges: clap:
Attached Image



Rep: (10)
Chuvik lived, Chuvik alive, Chuvik will live



Rep: (7)
Guys, why there is a trait lead battery? Dumb sensor or still Planche communicates with the controller?
Got a fresh battery, the tablet is very rapidly reacts to the connection of the third wire. Flashes rapidly charging lamp (2-3 times faster than it is charging)
It can not connect? Without it like working fine ...



Rep: (10)
Well, if without it works fine, why would connect?



Rep: (7)
"If the stars are lit, it means that it is necessary for someone" ...
On the other hand, my own battery is charging somewhere hour 4. The current - more than 8-hours and yusb tester shows at the same time consumed 9000 mAh ... What once would be very dofiga, plus native chuvik first battery up to 8 hours of living in windsurfing, now the "new" 6.


Full version    

Help     rules

Time is now: 17/08/20, 14:33