Restoring GI Fly RECOVERY T2 via the menu: 1) Download the software.
2) Download the firmware you want to copy on a USB flash drive that has a FAT file system 32 (note the firmware file from the .zip do not need to unzip the file must remain that what you are downloading it)
3) You want to change the name of the firmware file to update, I mean okontsovke we should have a file in the root of the USB drive update.zip
4) Prefix GI Fly T2 must be de-energized, connect the drive firmware into a free USB input.
5) Next, you need either a thin object on the rear side between the HDMI input connector and the connector from the power supply has a hole in it and we press the button to enter RECOVERY mode
6) Connect the power plug, the RESET button hold until the screen saver.
7) When the screen is released and the forward to seeing recovery menu aka RECOVERY mode
8) RECOVERY menu items is controlled by pressing the remote control joystick up or down.
9) Before the need to perform the update points
wipe data / factory reset and wipe cache partition 10) Next, activate the item
apply update from EXT Update from sdcard - installation file update.zip, located in the root of the memory card sdcard \
Update from udisk - installation file update.zip renovation, located in the root of the USB flash drive udisk \
11) Select the second paragraph, postpone aside the remote control and look forward to the update - recovery software GI Fly T2
If done correctly, the process of renewal will grow, and the power button will blink alternately green and red.
At the end of the update in the update logs on the screen will get an answer:
Install from udisk complete .
12) Next, activate the item
reboot system now Recovery from the list of items and expect to download is already restored GI Fly T2 software.
Post has been editedtimmyC - 08.04.15, 17:51