Enhanced - upgraded firmware based on stock; Balanced - upgraded firmware based on stock firmware with stock core, All stock applications are present, the interface is changed. Optimal - upgraded firmware based on stock firmware with custom kernel, cleared of trash; OptimalX - upgraded firmware based on stock firmware with a custom kernel, cleaned of trash and sewn full Xposed (at the moment, the best option for those who need the maximum functionality and the maximum number of pre-installed applications); LightX_LG - upgraded OptimalX-based firmware that is as clean as possible from rarely used garbage with stock launcher (simply cleared of the rarely used programs OptimalX - for minimalists who like buns of stock launcher); LightX_v3.5 - upgraded, optimally cleaned from rarely used debris firmware based on OptimalX with third-party launcher (at the moment the most "easy" of all custom firmware based on the drain - for minimalists
Survey results - help in choosing firmware for newcomers topics
There is no curator in the subject. For questions about filling caps, please contact the section moderators via the "Complaint" button under the messages to which you want to add links. If there is a user in the subject who wants to become a Curator and the correspondingRequirements for candidates, he can apply in the topicI want to be curator(after having studied the topic header and all materials for curators).
Hello. Was LG L90 android 4.4 V10f out of the box, everything worked well. Yesterday decided to flash a custom L90_D410_v10F_Balanced_042015 for L90 D410 Ruth made of caps I flashed Boot-block from your phone without a PC, from hats Set aside Recovery. Everything worked fine. Then he flashed a custom and began to work badly TOUCH. Slows down or does not respond. Sew the last custom L90_D410_LightX_v20d_v3.2_301215 for LG D410 All the same, but a little better. Sew the drain v10F. All the same I beg to drain through the "Instructions to update the firmware using a PC (LG Mobile Support Tool)" On formatting the partition and hard reset. Problems with tachem left of caps for all utility stitch and the menu served, all the same. While sometimes touch comes to life and normally work but sometimes it is extremely rare. Now smartphone stock after the LG Mobile Support Tool.
What can you advise? Backup from there Partitions Backup & Restore and LG L90 Utility. It makes sense to do root again and try to restore the partitions? And through what program?
PS Looking sought, there were several people with similar problems but no solution so unsubscribed.
I was able to install Cyanogen 13, but fell off IMEI, put the drain firmware received eternal reboot at startup in rekaveri does not go ... And, at least, to make a hard reset ... Can you help?
Has anyone encountered this problem? I tried to flash KDZ_FW_UPD_EN. but the computer does not see it. the phone will fall off, then connect. Video with problem
AlexUnder (UA), Under what OS it is better to do it? otherwise when I connect the phone while holding the volume +, the computer without the battery emits no warning about that that is connected. When a battery is connected, then turned off. Drivers are installed (cables tested)
Recent versions of katabatic firmware for LG D405 firmware via custom rekaveri. Android 4.4 v10d and 5.0 v20b withcatabatic boot and recovery.
Files are provided as is, derived from the corresponding KDZ-files. Not tested. Remember that you are doing all the actions with your smartphone at your own risk. I am not responsible for your actions or inactions.
Do not forget to make a full backup and backup imei !!!
Download: Android 4.4 v10d Android 5.0 v20b Installation using any of a custom rekaveri from any firmware. Root can receive and rekaveri broken and but the method describedhere.
Help with a problem! After not successful frauds with twrp, my phone stopped running. Hangs on the lg screen loading. Recovery does not open, the bootloader also stopped working. I wanted to reflash, but since the above does not work, I don’t know how.
Guys need help, after unsuccessful manipulations with lg d405 received the following, eternal logo lg, you can make hard reset buttons, but the thing is that there is no recovery, it goes into S / W mode, but the mtp driver is not installed, with a simple connection to a PC - blue The screen, all that is in the cap does not fit !! Guys, the fact is that it was not the first time a brick was worse, but before that, what was in the cap helped, but now it isn’t! I will be glad to any help! Windows 7x64, and also tried different cables!
In the cap for the 405th there is only a kind of v20a per file. I unpacked v20b for myself and flooded it into the cloud. May need someone. FW D405 v20b
Tell me, please, the commands for the terminal emulator to save the stock kernel and replace it with a custom one (above). Recovery me and stock will go. Found only instructions for replacing the boot block from the terminal emulator. I want to check out the core.
AlexUnder (UA), I will try by analogy with the boot-block: dd if = / dev / block / mmcblk0p6 of = / sdcard / abootstock.bin. I will write this: dd if = / dev / block / mmcblk0p16 of = / sdcard / bootstock.img